www.clare.com ds-cpc1394-r01 1 cpc1394 single pole optomos ? relay rohs 2002/95/ec e 3 pb part number description CPC1394G 4-pin dip (100/tube) CPC1394Gv 4-pin dip v-bend (100/tube) CPC1394Gr 4-pin surface mount (100/tube) CPC1394Grtr 4-pin surface mount (1000/reel) parameter rating units blocking voltage 600 v p load current 120 ma max on-resistance 35 applications features description approvals ordering information pin configuration the cpc1394 is a single-pole normally-open (1-form-a) solid state relay with an enhanced input to output isolation barrier of 5000v rms . clare?s patented optomos architecture makes available the optically coupled technology necessary to activate the output?s efficient mosfet switches. control of the isolated output is accomplished by means of the highly effective gaalas infrared led at the input. ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment?patient/equipment isolation ? security ? aerospace ? industrial controls ? ul recognized component: file # e76270 ? en/iec 60950 compliant ? csa certified component: certificate # 1172007 ? 5000v rms input/output isolation ? 600v p blocking voltage ? 100% solid state ? small 4-pin package ? low drive power requirements (ttl/cmos compatible) ? arc-free with no snubbing circuits ? no emi/rfi generation ? machine insertable, wave solderable switching characteristics of normally open (form a) devices control i load 10% 90% t on + + t off 1 2 3 4 + control C control load load
www.clare.com 2 cpc1394 r01 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. parameter ratings units peak blocking voltage 600 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 100 mw total package dissipation 2 550 mw isolation voltage, input to output 5000 v rms operational temperature -40 to +85 oc storage temperature -40 to +125 oc 1 derate linearly 1.33 mw/oc 2 derate linearly 3.00 mw/oc electrical absolute maximum ratings are at 25oc absolute maximum ratings electrical characteristics parameters conditions symbol min typ max units output characteristics @ 25c load current continuous - i l - - 120 ma peak t=10ms i lpk - - 400 on-resistance 1 i l =120ma r on -2635 off-state leakage current v l =600v p i leak -- 1 a switching speeds turn-on i f =5ma, v l =10v t on - 0.85 5 ms turn-off t off - 0.46 3 output capacitance i f =0ma, v l =50v, f=1mhz c out -50 - pf input characteristics @ 25c input control current 2 i l =120ma i f - 0.45 2 ma input dropout current - i f 0.2 0.4 - input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r --10 a common characteristics @ 25c input to output capacitance - c i/o -3 - pf 1 within 1 second of time. 2 for temperatures >60oc, an led current of 4ma is recommended.
cpc1394 www.clare.com 3 r01 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. led forward voltage (v) 1.230 1.235 1.240 1.245 1.250 1.255 device count (n) 0 5 10 15 20 25 30 35 typical led forward voltage drop (n=50, t a =25oc, i f =5ma) on resistance ( ) 25.50 25.75 26.00 26.25 26.50 26.75 27.00 device count (n) 0 5 10 15 20 25 typical on-resistance distribution (n=50, t a =25oc, i l =120ma, i f =2ma) blocking voltage (v p ) 680 685 690 695 700 705 710 715 device count (n) 0 5 10 15 20 typical blocking voltage distribution (n=50, t a =25oc) led current (ma) 0.30 0.35 0.40 0.45 0.50 0.55 0.60 device count (n) 0 5 10 15 20 typical i f for switch operation (n=50, t a =25oc, i l =120ma) turn-on time (ms) 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 device count (n)8 0 5 10 15 20 typical turn-on time (n=50, t a =25oc, i l =120ma, i f =5ma) turn-off time (ms) 0.34 0.37 0.40 0.43 0.46 0.49 0.52 0.55 device count (n) 0 5 10 15 20 25 typical turn-off time (n=50, t a =25oc, i l =120ma, i f =5ma) temperature (oc) -40 -20 0 20 40 60 80 100 load current (ma) 70 80 90 100 110 120 130 typical load current vs. temperature (i f =2ma) temperature (oc) -40 -20 0 20 40 60 80 100 leakage current (na) 0 20 40 60 80 100 typical leakage vs. temperature (v l =600v) temperature (oc) -40 -20 0 20 40 60 80 100 blocking voltage (v p ) typical blocking voltage vs. temperature 600 625 650 675 700 725 750 temperature (oc) -40 -20 0 20 40 60 80 100 turn-on time (ms) 0.5 1.0 1.5 2.0 2.5 3.0 typical turn-on vs. temperature (i l =70ma) i f =2ma i f =5ma temperature (oc) -40 -20 0 20 40 60 80 100 turn-off time ( s) 200 300 400 500 600 700 800 900 typical turn-off vs. temperature (i l =70ma) i f =2ma i f =5ma temperature (oc) -40 -20 0 20 40 60 80 100 led v f (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage drop vs. temperature i f =50ma i f =20ma i f =10ma i f =5ma i f =2ma
www.clare.com 4 cpc1394 r01 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. led current (ma) 0 1020304050 turn-on time (ms) 0 1 2 3 4 5 typical turn-on vs. led forward current (t a =25oc, i l =70ma) led current (ma) 0 1020304050 turn-off (ms) 0.45 0.47 0.49 0.51 0.53 0.55 typical turn-off vs. led forward current (t a =25oc, i l =70ma) temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( ) 15 20 25 30 35 typical on-resistance vs. temperature (i l =70ma, i f =2ma) led forward voltage (v) -40 -20 0 20 40 60 80 100 forward current (ma) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 typical i f for switch operation vs. temperature (i l =70ma) load voltage (v) -4 -3 -2 -1 0 1 2 3 4 load current (a) -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 typical load current vs. load voltage (i f =2ma) time 10 s 100 s 1ms 10ms 100ms 1s 10s 100s load current (a) 0.0 0.2 0.4 0.6 0.8 1.0 energy rating curve
cpc1394 www.clare.com 5 r01 manufacturing information soldering for proper assembly, the component must be processed in accordance with the current revision of ipc/jedec standard j-std-020. failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. washing clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. rohs 2002/95/ec e 3 pb mechanical dimensions 4-pin dip (?g? suffix) pc board pattern (top view) dimensions mm (inches) pin 1 6.350 0.127 (0.250 0.005) 4.572 0.127 (0.180 0.005) 0.991 (0.039) 9o (all) 3.30 0.050 (0.130 0.002) 0.254 (0.010) 9.144 0.508 (0.360 0.020) 7.620 0.254 (0.300 0.010) 7.620 0.127 (0.300 0.005) 2.540 0.127 (0.100 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 6.350 0.127 (0.250 0.005) 9o (all) 0.457 0.076 (0.018 0.003) 2.540 0.127 (0.100 0.005) 3.175 (0.125) 0.508 (0.020) 1.651 (0.065) 4-pin dip ?gv? package pc board pattern (top view) dimensions mm (inches) 10.160 0.127 (0.400 0.005) 2.540 0.127 (0.100 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 6.350 0.127 (0.250 0.005) 9o (all) 3.30 0.050 (0.130 0.002) 0.254 (0.010) 10.160 0.508 (0.400 0.020) 7.620 0.254 (0.300 0.010) 6.350 0.050 (0.250 0.002) 4.572 0.050 (0.180 0.002) 0.991 (0.039) 9o (all) 0.457 0.076 (0.018 0.003) 2.540 0.050 (0.100 0.002) 2.92 (0.115) 0.127 (0.005) 1.651 (0.065) pin 1
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-cpc1394-r01 ? copyright 2009, clare, inc. all rights reserved. printed in usa. 3/9/09 for additional information please visit our website at: www.clare.com 6 cpc1394 pin #1 6.350 0.127 (0.250 0.005) 0.991 (0.039) 9.525 (0.375) 2.540 0.127 (0.100 0.005) 4-pin surface mount (?gr? suffix) 7.620 0.254 (0.300 0.010) 0.635 0.254 (0.025 0.010) 0.254 (0.010) 3.300 0.050 (0.130 0.002) 3.480 0.076 (0.137 0.003) recommended pcb land pattern dimensions mm (inches) 2.287 (0.09) 8.80 (0.346) 1.60 (0.063) 0.95 (0.037) 9o 1o (all) 0.102 min / 0.254 max (0.004 min / 0.010 max) 4.572 0.127 (0.180 0.005) 2.540 0.127 (0.100 0.005) 2.287 0.127 (0.090 0.005) note: tape dimensions not shown comply with jedec standard eia-481-2 tape and reel packaging for 4-pin surface mount package dimensions mm (inches) embossment embossed carrier 330.2 dia (13.00 dia) top cover tape thickness 0.102 max (0.004 max) k 0 = 4.20 (0.165) k 1 = 3.70 (0.146) w = 16.00 (0.630) a 0 = 10.01 (0.394) p = 12.00 (0.472) b 0 = 5.00 (0.197) mechanical dimensions
|
