* speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a a-49 t-1-3/4 (5 mm) panel mount led assembly, flat-top G70F series the G70F panel mount assembly is designed to snap into a nominal 1/4 hole from the front of the panel. the wires are ul 1061, 26 awg, pvc insulated multi-strand wire with 3 mm ends stripped & tinned. the G70F is available in a variety of colors as well a s a superbright lamp incorporating a built-in ashing circuit.(order code fsr) the G70F is ideal for applications where wide viewing angle and a low pro le is desired. specify part desired as follows: G70F/order code-l (wire length in inches; 6" and 24" are standard) for example: G70F/fsr-24 designates a ashing superbright red lamp with 24" long wires attached. order code and information (all ratings at 25 c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required red h 697 2.1 0.5 120 5-10 hi eff red i 635 2.0 3.0 120 10-20 green g 565 2.1 3.0 120 10-20 yellow y 585 2.0 3.0 120 10-20 super red fsr 660 3-5 volts flashing 120 4 volts black red schematic 5.0 dia 7.1 dia 2.8 .5 0.8 11.3 6.1 dia 1.5x4.5x0.2 3 pls l = total wire length
|
