spec no: dsad0526 rev no: v.9 date: nov/01/2010 page: 1 of 4 approved: wynec checked: allen liu drawn: d.m.su er p: 1338000039 20mm big lamp part number: dlc/6id high efficiency red features z 12 pins. z high luminous intensity. z low power consumption. z wide viewing angle. z categorized for luminous intensity. z excellent on / off contrast. z easy mounting on p.c. board or sockets. z solid state reliability. z rohs compliant. description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsad0526 rev no: v.9 date: nov/01/2010 page: 2 of 4 approved: wynec checked: allen liu drawn: d.m.su er p: 1338000039 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 dlc/6id high efficiency red (g aasp/gap) red diffused 20 49 120 iv (mcd) [2] @ 10ma symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red 627 nm i f =20ma d [1] dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half-width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f [2] forward voltage high efficiency red 2 2.5 v i f =20ma i r reverse current high efficiency red 10 ua v r = 5v parameter high efficiency red units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3-5 seconds
spec no: dsad0526 rev no: v.9 date: nov/01/2010 page: 3 of 4 approved: wynec checked: allen liu drawn: d.m.su er p: 1338000039 high efficiency red dlc/6id
spec no: dsad0526 rev no: v.9 date: nov/01/2010 page: 4 of 4 approved: wynec checked: allen liu drawn: d.m.su er p: 1338000039 packing & label specifications dlc/6id
|
