www.sunled.com published date : feb 27,2008 drawing no : sdsa6422 v1 checked : b.l.liu p.1/4 part number: ZM2BG94W 5.6x1.4mm right angle smd chip led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZM2BG94W green ingan water clear 480 995 525 90 preliminary spec notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjec t to change without notice. features z 5.6mmx1.4mm right angle smt led, 1.0mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z moisture sensitivity level : level 4. z package: 2000pcs / reel . z rohs compliant. attention observe precautions for handling electrostatic discharge sensitive devices m2bg (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 525 nm wavelength of dominant emission (typ.) (i f =20ma) d 535 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 39 nm capacitance (typ.) (v f =0v, f=1mhz) c 65 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bg (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v
www.sunled.com published date : feb 27,2008 drawing no : sdsa6422 v1 checked : b.l.liu p.2/4 part number: ZM2BG94W 5.6x1.4mm right angle smd chip led lamp ? m2bg
www.sunled.com published date : feb 27,2008 drawing no : sdsa6422 v1 checked : b.l.liu p.3/4 part number: ZM2BG94W 5.6x1.4mm right angle smd chip led lamp remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? recommended soldering pattern (units: mm ; tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications.
www.sunled.com published date : feb 27,2008 drawing no : sdsa6422 v1 checked : b.l.liu p.4/4 part number: ZM2BG94W 5.6x1.4mm right angle smd chip led lamp packing & label specifications ZM2BG94W
|