OFI-2000 multifunction loss test set key features ? fox functionality allows for automatic continuity check, bi-directional il, orl, and length measurements with a single key press ? fttx ready by integrating dedicated wavelengths (1310/ 1490/1550 nm) for pon testing as well as an optimized test sequence for increased field productivity ? compact and rugged design makes it an ideal field tool ? large front panel provides easy access for the connection/disconnection of the fiber ? large, high-visibility color display allows for use in any lighting conditions, making it suitable for both outside plant and central office use ? test results are provided in a single table, providing a very comprehensive data management system ? pass/fail indicators allow for rapid fault detection and identification website : www.jdsu.com acterna test & measurement solutions fiber network deployment, service provisioning, and troubleshooting in todays telecommunications market, test solutions must be cost effective, increase productivity, and reduce the complexity of field testing. jdsus OFI-2000 multifunction loss test set offers a highly versatile handheld test instrument, which has been specifically developed in response to these industry demands. configurable at the time of order, the OFI-2000 is capable of fully characterizing the suitability of the optical fiber for transport, metro, or access networks, including fttx and passive optical network (pon) systems. by combining a large high-visibility color display, intuitive one-button fiber optics expert (fox) functionality, and simple pass/fail indicators, the OFI-2000 enhances productivity and reduces the burden of training technicians. cables with high fiber counts can be easily characterized using the OFI-2000s unique color-coding and large memory storage capabilities. in addition, professional proof-of-performance reports can be quickly generated using jdsus fiberbudget and fibercable software solutions.
2 OFI-2000 multifunction loss test set improve productivity and efficiency in the field the OFI-2000 includes several features that improve productivity and reduce test times on cables with high fiber counts. using the test instruments fox functionality, technicians are guided through the test setup process. in addition, one single key press automatically tests, displays, and records measurements on both the near-end and far-end units. C ensure accurate and consistent testing with the OFI-2000s durable shock- and weather-resistant design C extend testing periods using batteries in the field (up to 14 hours) C dramatically reduce test times by evaluating fiber continuity, insertion loss (il), optical return loss (orl), and length measurements and displaying all results on both OFI-2000 units within 15 seconds per fiber C minimize the amount of time required for fiber connection and disconnection using the OFI-2000s easy front panel access C store complete test results in both OFI-2000 units for an on-site reporting capability in master-master systems C the OFI-2000 automatically stores results at the end of each test and replicates the results between the near-end and far-end units to ensure the integrity of the test data C minimize handling errors using the OFI-2000s pass/fail indicators portable, rugged, weather resistant and battery operated, the OFI-2000 is ideal for field testing during the installation and deployment of both fiber and pon networks. integrate multiple functions in one handheld test instrument, including a light source, power meter, loss test set, optical talk set, and vfl easy access to all optical and electrical ports flexible power with extractable battery pack with either rechargeable or aa batteries large, high-visibility color display for viewing in any lighting conditions rs-232 port for data transfer and fast report generation fox functionality testing, including bi-directional il, orl, and length measurements for up to three wavelengths with one key press
3 OFI-2000 multifunction loss test set referencing with the easy- to-use gui view results in one table with pass/fail indicators includes a color-coding capability for ease-of-use ready to test the next fiber! perform multiple acquisi- tions with the fox function- ality button test the fiber using the OFI-2000s easy-to-use graphical user interface (gui), the test instrument is simple to set up for referencing and obtaining orl measurements. the technician is easily guided through the necessary steps. each unit integrates a precise standalone power meter to enhance referencing and improve optical return loss budget measurement accuracy. C provides an automated bi-directional loss test set for fiber insertion loss, return loss, length, and continuity checking as well as an optional vfl and optical talk set C tests at 1310/1550/1625 nm wavelengths for telecommunications applications C tests at 1310/1490/1550 nm wavelengths for fttx/pon applications C provides accurate and reliable orl measurements even on very short spans of fiber, fttx for example
OFI-2000 multifunction loss test set bi-directional fttx testing using one technician C in compliance with itu-t g.983.3, the OFI-2000 provides a three wavelength version at 1310 nm, 1490 nm, and 1550 nm, expanding its test capabilities to fttx/pon C the master-master operation of the OFI-2000 enables technicians to leave one unit at the central office (co) in standby mode and perform the testing from the ont using the other unit. alternatively, multiple ofi test instruments (OFI-2000s or ofi modules for the mts/t-berd platforms) can be used. C document both ends of the link with one piece of test equipment communicate along the fiber near-end and far-end technicians can communicate with each other using the built-in short messaging system (sms). for more flexible dialog during testing using a dedicated communications fiber, the OFI-2000 is available with a 45 db optical talk set option, providing a dedicated port and headset/microphone for both units. C 45 db optical talk set offers a constant communication capability with a dedicated port and headset/microphone C compatible with all optical talk sets in jdsus product portfolio, including the mts/t-berd platforms and the ots-55 4 1xn spl itt er data voice 1310 nm 1490 nm ip video central off ice olt ont ont fttx/pon characterization using one technician at the customer premises
OFI-2000 multifunction loss test set comprehensive list of cable results using jdsus unique cable manager solution, the amount of time and costs associated with analyzing your results can be significantly reduced. results can be provided by job, cable, or fiber according to the pass/fail thresholds that have been preset by the technician. C large memory storage capability and pass/fail indicators improve productivity (up to 1000 fibers) C the user-definable color-coding management system follows tia/eia wiring standards and automatically decodes the fiber number to help the technician identify the different fibers C the results display allows for the rapid identification of missing records and/or fail values generate the test report transfer the data and generate comprehensive reports using jdsus fiberbudget software. this software is complimentary and can be downloaded from jdsu.com. C generate proof-of-performance reports with a high degree of customization capabilities C dedicated tables are provided for each test result (length, loss, orl) C out-of-range value summaries are provided with analysis of macro-bends C compare results between the different wavelengths to identify bends and constraints 5 fiber results review example of test report C all relevant fiber information is displayed on one large 5.7 screen C fibers are identified by number and color C out-of-range length, loss, and orl measurements are identified
OFI-2000 multifunction loss test set enhanced testing solution the OFI-2000 not only functions as a standalone test solution, but it can also be combined with jdsus mts/t-berd platforms for the complete charac- terization of the fiber network using additional test functions, such as otdr, cd, and pmd. the OFI-2000 is fully compatible with the ofi module of the optical test platform allowing for fiber continuity checks and bi-directional length, loss, and return loss measurements as well as enabling communication through the optical talk set or using the sms. simplify fiber testing! a wide range of accessories are available that will provide technicians with everything they need to take advantage of the OFI-2000s complete testing capabilities. 6 OFI-2000s accessories mts/t-berd 8000 platform with otdr and ofi modules
OFI-2000 multifunction loss test set 7 loss test set function dynamic range of loss 60 db accuracy loop back: ?.25 db, side-by-side: ?.15 db result resolution 0.01 db optical return loss function (also valid for manual orl) orl measurement display range (limited to front-end connector, apc recommended) up to 65 db accuracy ?.5 db length function distance accuracy l<3 km: ?0 m, 3 kmOFI-2000 technical specifications (typical 25c) base unit display 1/4 vga active b/w display (5.7 in) power supply, removable, 3-way dry batteries, nimh rechargeable battery, ac/dc operating time with dry batteries (loss test set mode) >8 hours operating time with nimh (loss test set mode) >13 hours ce conformance yes operation temperature range -10 to +50c storage temperature range -20 to +70c weight with dry batteries and all options 4 lb (1.8 kg) dimensions (w x h x d) 8 x 8 x 3 inches (20 x 20 x 8 cm) data transfer direct via rs-232 yes store function yes bi-directional test set specifications these specifications apply to the OFI-2000 series. to ensure optimal use (bi-directional measurement and communication), two OFI-2000 units are required. source function (also valid for source mode) laser type class 1 laser wavelength at 25c 1310 ?0 nm, 1490 ?0 nm, 1550 ?0 nm, 1625 ?0 nm spectral bandwidth 5 nm maximum output level into 9/125 ? fiber (cw mode) - 3.5 dbm modulated output average level 3 db less level stability short term 15 min (t = ?.3 k) ?.02 db long term 8 hours (t = ?.3 k) ?.2 db modulation frequencies continuous wave, 270 hz, 330 hz, 1 khz, 2 khz twintest and auto- detection all wavelengths activated one after the other power meter function (internal pigtailed photo detector) wavelength range 1200 to 1650 nm auto- detection (including twintest) 850/1310/1550/ 1625 nm with jdsu laser sources dynamic range of the power meter 0 to -80 dbm detector type ingaas display resolution 0.01 db
OFI-2000 multifunction loss test set all statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. the user assumes all risks and liability whatsoever in connection with the use of a product or its application. jdsu reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ- ing withdrawal at any time of a product offered for sale herein. jdsu makes no representations that the products herein are free from any intellectual property claims of others. please contact jdsu for more information. jdsu and the jdsu logo are trademarks of jds uniphase corporation. other trademarks are the property of their respective holders. ?006 jds uniphase corporation. all rights reserved. 30137528 000 0406 ofi2000.ds.fop.tm.ae north america toll free : 1 866 228 3762 fax : +1 301 353 9216 test & measurement regional sales latin america tel : +55 11 5503 3800 fax : +55 11 5505 1598 asia pacific tel : +852 2892 0990 fax : +852 2892 0770 emea tel : +49 7121 86 2222 fax : +49 7121 86 1222 website : www.jdsu.com ordering information the standard OFI-2000 multifunction loss test set includes a black-and-white lcd screen, rs-232 interface and cable, neck strap, ac/dc adapter, soft case, one battery pack with six dry batteries, one rechargeable battery, user manual, lens tissue (30 pcs), and connector cleaning sticks (5 pcs).the basic functions include a bi-directional loss test set with standalone power meter and delay/length measurements. OFI-20 x x laser type standalone power meter type 0 : 1310/1550 nm 1 : standard power 3 : 1310/1550/1625 nm 2 : high power 4 : 1310/1490/1555 nm example OFI-2031 is a 1310/1550/1625 nm standard power loss test set base unit options eoficol high visibility color display eofiots optical talk set (45 db) with headset eofivflupp vfl option with upp connector eofiorl orl with mandrel (available only with bi-directional loss test set) eaupp25 upp adapter for din, fc, sc, st (d = 2.5 mm) eaupp125 upp adapter for lc, mu (d = 1.25 mm) accessories for the OFI-2000 family eofirb rechargeable battery (can be charged with ofi or ac/dc) eofiacdc ac/dc adapter eoficase additional ofi soft case eoficl cigarette lighter power adapter optical connectors for the loss test set and talk set (connectors must be of the same type) one connector must be specified when ordering an OFI-2000 unit field-replaceable connectors: eunipcfc, eunipcsc, eunipcst, eunipcdin, eunipclc, euniapcfc, euniapcsc, euniapcst, euniapcdin, euniapclc optical adapters for the standalone optical power meter one optical adapter of the same type as the loss test set connector is provided as standard other adapters are also available: a/sma, fc/pc, diamond, biconic, din,vfo, st, sc, ec, e2000, upp 2.5 mm, and upp 1.25 mm (2014/00.xx type) for more information regarding test adapters, cables, and fiber optic couplers, refer to the separate datasheet: fiber optic test adapters and cables.
|
