unisonic technologies co., ltd un1596 preliminary npn silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2012 unisonic technologies co., ltd qw-r207-021.b npn silicon planar medium power high gain transistor ? description the utc un1596 are series of npn silicon planar transistor, which has gain of 500 at i c =100ma.it can be used in such applications: battery powered circuit and darlington replacement. ? features * gain :500 @ i c =100ma * low saturation voltage ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 un1596l-aa3-r UN1596G-AA3-R sot-223 b c e tape reel
un1596 preliminary npn silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r207-021.b ? absolute maximum ratings parameter symbol ratings unit collector-base voltage v cbo 180 v collector-emitter voltage v ceo 180 v emitter-base voltage v ebo 5 v collector current i c 0.5 a peak pulse current i cm 1 a collector power dissipation t a =25 p c 2 w junction temperature t j +150 storage temperature t stg ? 55 ~ +150 note: absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit collecto r -base breakdown voltage bv cbo i c =100 a 180 v collector-emitter breakdown voltage bv ceo i c =10ma 180 v emitter-base breakdown voltage bv ebo i e =100 a 5 v base-emitter turn -on voltage v be ( on ) i c =200ma, v ce =5v 0.9 v collector cutoff current i cbo v cb =140v 100 na emitter cutoff current i ebo v eb =4v 100 na on characteristics collector-emitter satu ration voltage v ce(sat) i c =50ma, i b =0.5ma 0.2 v i c =100ma, i b =2ma 0.2 i c =250ma, i b =5ma 0.25 base-emitter satura tion voltage v be ( sat ) i c =20ma, i b =5ma 0.9 v dc current transfer ratio h fe i c =100ma, v ce =5v 500 i c =200ma, v ce =5v 150 small-signal characteristics transition frequency f t i c =50ma, v ce =5v, f=50mhz 70 mhz input capacitance c i v eb =0.5v, f=1mhz 200 pf output capacitance c o v cb =10v, f=1mhz 6 pf switching times t on i c =100ma, i b1 =10ma 80 ns t off i b2 =10ma, v cc =50v 4400 note: pulse width=300 s. duty cycle Q 2% utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
