lpd10 series single, dual and triple output [ 2 year warranty ] ? 4:1 wide input voltage range ? 16 models available including 3.3v outputs ? input reflected ripple according to cept ? continuous short circuit protection ? en55022 conducted emissions level b ? designed to meet en60950 and iec950 the lpd10 series of dc/dc converters offer 10 watts output power in a 2 x 2 inch package. 3.3v single outputs are available along with standard single, dual and triple outputs. all models feature short circuit protection as standard. the dual and triple output models of the lpd series provide undervoltage lockout. the lpd10 series complies with the rigorous en55022 level b conducted emissions. the optimized thermal design and the copper case allow operation in ambient temperatures up to +70c without derating or an additional heatsink. specification all specifications are typical at nominal input, full load at 25 c unless otherwise stated page 108 emc characteristics conducted noise en55022, fcc part 15 level b radiated noise en55022, fcc part 15 level b general specifications efficiency see table isolation voltage input/output 500vdc isolation resistance input/output 10 8 isolation capacitance input/output 1nf switching frequency fixed 180 to 220khz approvals and safety vde0805, en60950, iec950 standards (pending) ul1950, csa c22.2 no. 950 case material black coated, metal case material flammability ul94v-0 weight 65g (2.29oz) mtbf mil-hdbk-217f 300,000 hours environmental specifications thermal performance operating ambient -10c to +70c (see derating curve) non-operating amb. -25c to +95c case +95c max. derating see derating curve cooling free air convection cooled relative humidity non-condensing 30% to 95% altitude operating 10,000 feet max. non operating 40,000 feet max. vibration 5hz to 500hz 2.5g rms (approx.) data sheet ? artesyn technologies ? 2000 the information and specifications contained in this data sheet are believed to be correct at time of publication. however, artesyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. output specifications line regulation ll to hl, singles and duals 0.1% ll to hl, triple output 1.0% load regulation singles and duals: 0.1% 10% to 100% fl triples: 10% to 100% fl 3.0% cross regulation duals: asymmetrical load 4.0% max. (see note 1) 10% to 100% fl triples: asymmetrical load 5.0% max. 10% to 100% fl voltage accuracy singles 2.0% duals 3.0% minimum load 3.3v, 5v 50ma max. single 12v, 15v 20ma max. duals & triples, each output 10% fl overshoot at start-up 3.0% max. ripple and noise 20mhz bandwidth 1.0% pk-pk, max. 20mv rms temperature coefficient 0.02%/c short circuit protection hiccup mode continuous (see note 2) automatic recovery input specifications input voltage range 24vdc nominal, fl 10 to 36vdc 48vdc nominal, fl 20 to 72vdc input current see table undervoltage lockout dual and triple outputs 24v nominal 9.5vdc max. 48v nominal 18.5vdc max. start-up time 200ms
notes 1 cross regulation: duals: output 1, full load, 4.0%; output 2, minimum load, 4.0%. triples: output 1, full load, 2.0%; output 2 vs. output 3, 2.0%; triples: outputs 2 and 3 vs. output 1, 5.0%. 2 all 3v3 outputs, 1 minute max. output power (watts) 0w 0 c 20 c 40 c 60 c 80 c 100 c -10 c 95 c derating curve output power (watts) 70 c 10w ambient temperature ( c) 10 watt wide input dc/dc converters dc/dc converters | 10w dc/dc input output output input typical regulation (typ.) model number voltage voltage current current efficiency line load 10-36vdc 3.3v 2000ma 381ma 72% 0.1% 0.2% lpd10-24s3v3-c 10-36vdc 5.0v 2000ma 540ma 77% 0.1% 0.1% lpd10-24s05-c 10-36vdc 12v 800ma 512ma 78% 0.1% 0.1% lpd10-24s12-c 10-36vdc 15v 660ma 512ma 78% 0.1% 0.1% lpd10-24s15-c 10-36vdc 12v 400ma 512ma 78% 0.1% 0.1% lpd10-24d12-c 10-36vdc 15v 300ma 512ma 78% 0.1% 0.1% lpd10-24d15-c 10-36vdc 5v/12v 1000ma/200ma 510ma 80% 1.0% 3.0% lpd10-24t05-12 10-36vdc 5v/15v 1000ma/160ma 510ma 80% 1.0% 3.0% lpd10-24t05-15 20-72vdc 3.3v 2000ma 190ma 72% 0.1% 0.1% lpd10-48s3v3-c 20-72vdc 5.0v 2000ma 267ma 78% 0.1% 0.1% lpd10-48s05-c 20-72vdc 12v 800ma 253ma 79% 0.1% 0.1% lpd10-48s12-c 20-72vdc 15v 660ma 253ma 79% 0.1% 0.1% lpd10-48s15-c 20-72vdc 12v 400ma 253ma 79% 0.1% 0.1% LPD10-48D12-C 20-72vdc 15v 300ma 253ma 79% 0.1% 0.1% lpd10-48d15-c 20-72vdc 5v/12v 1000ma/200ma 255ma 80% 1.0% 3.0% lpd10-48t05-12 20-72vdc 5v/15v 1000ma/160ma 255ma 80% 1.0% 3.0% lpd10-48t05-15 http://www.artesyn.com all dimensions in inches (mm) tolerance : 0.008 (0.2) max. on pin placement 0.02 (0.5) max. on outer dimensions pinout (single, dual) 0.20 (5.10) - + 0.80 (20.30) input - + output com/n.c. bottom view 0.60 (15.25) 0.42 (10.70) 2.00 (50.80) 0.04 dia. (1.00) 0.24 (6.00) 2.00 (50.80) 0.60 (15.25) 0.60 (15.25) 0.60 (15.25) 0.90 (22.85) 0.90 (22.85) 0.80 (20.30) 0.04 dia. (1.00) 0.50 (12.70) 0.24 (6.00) all dimensions in inches (mm) tolerance : 0.008 (0.2) max. on pin placement 0.02 (0.5) max. on outer dimensions 2.0 (50.80) 0.20 (5.10) - + 1.80 (45.72) 2.00 (50.80) input - + output com 5v bottom view pinout (triple) 0.90 (22.85) 0.40 (10.20) 0.90 (22.85) 0.10 (2.54) 0.10 (2.54) 0.39 (10.10) 0.40 (10.20) 0.40 (10.20) 0.39 (10.10) page 109 5 ds_lpd10_20000101.pdf
|
