technical data sheet ssmc right angle jack 38K202-301E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to en 122 180, iec 60169-19 documents assembly instruction 35 c material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over nickel outer contact brass gold, min. 0.8 m, over nickel body brass gold, 0.1 m min. coupling nut beryllium copper gold, min. 0.15 m, over chemical nickel dielectric ptfe crimping ferrule copper gold, 0.1 m min.
technical data sheet ssmc right angle jack 38K202-301E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 ? frequency dc to 6 ghz return loss 14 db, dc to 1 ghz 12 db, 1 to 3 ghz insertion loss 0.1 x db, dc to 3 ghz insulation resistance 1x10 3 m ? center contact resistance 5 m ? outer contact resistance 2.5 m ? test voltage 500 v rms working voltage 175 v rms rf-leakage 70 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 8 n coupling test torque 0.3 nm recommended coupling torque 0.2 to 0.23 nm tensile strength of coupling mechanism 100 n environmental data temperature range -55c to +155c climatic class iec 60068-2-1 55/155/21 iec 60068-2-2 iec 60068-2-3 vibration iec 60068-2-6 10 hz to 500 hz, 98m/s2 tooling crimping tool 11w150-000 crimp insert 11w150-101 suitable cables rg 196 a/u, rg 178 b/u packing standard 100 pcs in bag weight 1.1 g/pce draft date approved date rev. engineering change number name date inge mhlauer 28/09/04 rong fang 02/11/05 b00 05-0567 inge mhlauer 02/11/05 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to ma ke changes judged to be necessary.
|
