euroquartz limited blacknell lane crewkerne somerset uk ta18 7he tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk euro quartz 14 pin dual-in-line oscillators hs14 sine wave clock oscillators provide a true sine wave out output while being packaged in the industry-standard, 14 pin dil outline package. the oscillator is capable of being produced with close tolerances and exhibits low current consumption. sine wave output in industry-standard 14 dil package choice of output loads harmonics -25dbc maximum very low current consumption <1.0ma for hsr14 features outline & dimensions frequency range hs14 at 3.3 volts: 10.0mhz to 800.0mhz hs14 at 5.0 volts: 10mhz to 156.0 mhz hsr14: 10mhz to 30mhz input voltage hs14: +3.3v or +5.0vdc 5% hsr14: +2.8v, +3.3v or +5.0vdc 5% output wave form: true sine wave frequency stability 0~70c: 25ppm, 50ppm or 100ppm* -40 ~+85c: 25ppm, 50ppm or 100ppm* output level hs14: 0dbm into 50 ohms <5dbm available hsr14 10k w //10pf load, level 1.0v p-p harmonics: -25dbc maximum phase noise: -130 dbc/hz at 1khz offset current consumption: see table start-up time: 2.0ms typical storage temperature: -55 to +125c sub-harmonics: none ageing: 5ppm/year enable/disable option: output is high impedance when pad 1 is taken low. disable time: 150ns maximum (add 't' to the part number code for this option.) rohs status: compliant and non-compliant versions are available. specification * non-standard frequency stability is available, check with sales. example: 3hsr14g-b-t-25.000-x part numbering supply voltage 28 = 2.8 volts 3 = 3.3 volts 5 = 5.0 volts series designation hs14 hsr14 rohs g = compliant blank = non-compliant stability a = 25ppm 0 to +70c b = 50ppm 0 to +70c c = 100ppm 0 to +70c d = 25ppm -40 to +85c e = 50ppm -40 to +85c f = 100ppm -40 to +85c enable/disable t = implemented blank = not-implemented frequency (mhz) customer-specific code ( included if specified by engineering department. ) hs14 and hsr14 sine wave oscillators description type/frequency supply voltage (5%) hs14 10mhz hs14 100mhz hs14 150mhz hsr14 10mhz +2.8 +3.3v +5.0v - 9ma 18ma - 18ma 34ma - 19ma 36ma 1.0ma 1.1ma 1.2ma current consumption 10.0mhz to 800.0mhz
|