1008ps inductors for xdsl filters document 240 coilcraft?s new 1008ps series is ideal for use in a variety of filters, including the data separation filters used in vdsl and isdn/adsl implementations. they measure just 2.6 mm high and have very low dc resistance to reduce insertion loss. the specially de- signed ferrite cover provides magnetic shielding and the best possible surface for pick and place handling. coilcraft offers a library of reference designs for various xdsl filters using these and other surface mount com- ponents. we can also provide several complete low pass and band pass filter modules in space-saving sip configurations. coilcraft designer?s kit c141 contains six samples each of the standard parts shown. to order, contact coilcraft or visit http://order.coilcraft.com . abcdefg 0.15 0.15 0.10 0.10 0.08 0.07 0.02 3,7 3,7 2,6 2,5 2,0 1,7 0,5 specifications subject to change without notice. document 240 revised 12/11/00 part inductance 1 dcr max 2 srf typ 3 i sat 4 i rms 5 number (h) 20% (ohms) (mhz) (a) (a) 1008ps-102mc 1.0 0.05 344 3.0 2.90 1008ps-152mc 1.5 0.06 260 2.8 2.55 1008ps-202mc 2.0 0.08 225 2.1 2.20 1008PS-352MC 3.5 0.13 185 1.3 1.95 1008ps-392mc 3.9 0.17 175 1.2 1.50 1008ps-472mc 4.7 0.30 160 1.0 1.30 1008ps-572mc 5.7 0.32 150 1.0 0.95 1008ps-702mc 7.0 0.45 120 0.84 0.85 1008ps-103mc 10 0.80 105 0.78 0.75 1008ps-153mc 15 1.03 35 0.70 0.70 1008ps-223mc 22 1.22 26 0.65 0.60 1008ps-333mc 33 1.55 20 0.51 0.58 1008ps-393mc 39 1.65 16 0.45 0.51 1008ps-473mc 47 2.2 19 0.40 0.48 1008ps-683mc 68 3.3 12 0.31 0.40 1008ps-823mc 82 3.7 9.0 0.30 0.35 1008ps-104mc 100 5.5 7.0 0.30 0.32 1008ps-124mc 120 6.0 7.0 0.25 0.31 1008ps-154mc 150 6.4 5.8 0.22 0.28 1008ps-224mc 220 9.4 10.0 0.22 0.24 1008ps-334mc 330 10.6 3.8 0.20 0.22 1008ps-474mc 470 13.0 3.1 0.16 0.20 1008ps-564mc 560 16.7 2.8 0.13 0.18 1008ps-684mc 680 18.5 2.5 0.12 0.17 1008ps-824mc 820 24 1.5 0.10 0.16 1008ps-105mc 1000 29 2.0 0.10 0.14 1. inductance measured at 100 khz, 0.1 vrms, using coilcraft smd-a fixture in agilent 4263b impedance analyzer with coilcraft-provided correlation pieces. for recommended test procedures, contact coilcraft. 2. dcr measured on micro-ohmmeter and coilcraft ccf 840 test fixture. 3. srf measured using hp8753d network analyzer and coilcraft smd-d test fixture. 4. inductance drop = 10% typ. at rated i sat. 5. t = 40 c rise typ. at i rms. 6. operating temperature range -40 c to +125 c. 7. electrical specifications at 25 c. parts/reel: 7 ? 750; 13 ? 2500 tape width: 12 mm for packaging data see ? tape and reel specifications ? (document 173)
|