www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 supplement specifications: sc contact: becu shell: brass -gg plating: 30 " (0,76 m) au over 50 " (1,27 m) ni on contact; 10 " (0,25 m) au over 50 " (1,27 m) ni on shell -gt plating: 30 " (0,76 m) au over 50 " (1,27 m) ni on contact; sn over 50 " (1,27 m) ni on shell -tt plating: sn over 50 " (1,27 m) ni on contact; sn over 50 " (1,27 m) ni on shell -st plating: 10 " (0,25 m) au over 50 " (1,27 m) ni on contact; sn over 50 " (1,27 m) ni on shell current rating: 1 a contact resistance: 10 m ? max insertion force (sc): 9 oz (2,50n) avg, 16 oz (4,45n) max withdrawal force (sc): 2.5 oz (0,70n) avg, 1.5 oz (0,42n) min insertion force (ez): 2.5 oz (0,70n) avg, 5.5 (1,53n) oz max withdrawal force (ez): 2.0 oz (0,56n) avg, 0.35 oz (0,10mm) min lead dia accepted: .015" to .022" (0,38mm to 0,56mm) and most ic leads sc?p1? sc 6p1? sc?p3? sc?p1 ez?p1? ez 6p1? sc-7p1 sc?l1 ez?l1 part no. sc?p3 ez?p3 sc?p2 ez?p2 x dia (0,51) .020 (0,46) .018 w 010 (4,32) .170 (3,81) .150 z 015 (13,77) .542 (17,86) .703 y 015 (8,86) .349 (12,95) .510 part no. sc?w1?x? ez?w1?x? sc?w1?x? ez?w1?x? sc?w1?x? ez?w1?x? y .010 (12,95) .510 (9,14) .360 (6,60) .260 z .015 (17,86) .703 (14,05) .553 (11,51) .453 sc?p3? sc?p2 ez?p3? ez?p2 sc?w1 ez?w1 sc?p2 insertion depth= .125" to .157" (3,18mm to 3,99mm) plating available = gg, gt, tt part no. sc?p1 ez?p1 sc?p1 ez?p1 sc?p3 sc?p1 sc?p1 y .010 (3,18) .125 (4,57) .180 (10,41) .410 (12,95) .510 (7,06) .278 x dia (0,51) .020 (0,51) .020 (0,64) .025 (0,89) .035 (0,51) .020 z .015 (7,62) .300 (8,89) .350 (15,24) .600 (17,86) .703 (11,25) .443 insertion depth (sc-1p1, sc-1l1, sc-6p1, sc-7p1) = .95" to .145" (2,41mm to 3,68mm) insertion depth (sc-2p1) = .125" to .157" (3,18mm to 3,99mm) insertion depth (sc-1p3) = .095" to .138" (2,41mm to 3,51mm) plating available (sc-1p1, sc-1l1) = gg, gt, tt, st plating available (sc-6p1, sc-2p1,sc-7p1) = gg, gt lead size hole size (0,46) .018 dia (0,61) .024 dia (0,51) .020 dia (0,66) .026 dia (0,64) .025 dia (0,79) .031 dia (0,76) .030 dia (0,91) .036 dia (0,89) .035 dia (1,04) .041 dia (1,14) .045 dia (1,30) .051 dia (1,32) .052 dia (1,47) .058 dia (0,46) .018 sq (0,76) .030 dia (0,64) .025 sq (1,02) .040 dia (1,14) .045 sq (1,75) .069 dia (0,20) .008 x (0,71) .028 (0,89) .035 dia (0,25) .010 x (0,51) .020 (0,71) .028 dia (0,41) .016 x (0,51) .020 (0,79) .031 dia (0,41) .016 x (0,61) .024 (0,89) .035 dia (0,41) .016 x (0,79) .031 (1,04) .041 dia recommended pc hole size: insertion depth (sc-2p2) = .125" to .145" (3,18mm to 2,41mm) insertion depth (sc-2p3) = .125" to .170" (3,18mm to 4,32mm) plating available = gg, gt insertion depth = .095" to .145" (2,41mm to 3,68mm) plating available = gg, gt (1,32) .052 dia (1,52) .061 dia (1,83) .072 dia (0,76) .030 y z (0,71) .028 x dia standard, low profile & (0,76) .030 dia (1,83) .072 dia (0,76) .030 (3,43) .135 (1,02) .040 dia (7,62) .300 (1.32) .052 dia (1,52) .061 dia z (0,76) .030 (0,71) .028 (1,83) .072 dia (0,64) .025 sq y (1,32) .052 dia (0,89) .035 dia (1,32) .052 dia z (1,83) .072 dia (1,52) .061 dia x dia (0,76) .030 (0,71) .028 w y (1,32) .052 dia (1,45) .057 dia (1,53) .061 dia (7,37) .290 (3,18) .125 (0,64) .025 (0,51) .020 dia insertion depth = .095" to .145" (2,41mm to 3,68mm) plating available = gg, gt sc 2s1 (7,37) .290 (2,30) .090 (0,76) .030 (1,83) .072 dia (0,97) .038 dia (1,32) .052 dia (1,52) .061 dia (0,71) .028 note: some sizes, styles and options are non-standard, non-returnable. sc 7p1 gg
sc 2p7 gg www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 supplement insertion depth = .080" to .105" (2,03mm to 2,67mm) lead dia accepted: .016" to .021" (0,41mm to 0,53mm) plating available = gg, gt, tt sc 5p1 ,sc 9p1 ez 5p1 , ez 9p1 sc 1m1 , sc 1m2 ez 1m1 , ez 1m2 insertion depth = .085" to .140" (2,16mm to 3,56mm) lead dia accepted: .016" to .020" (0,41mm to 0,51mm) plating available = gg, gt, tt sc 1s1 ez 1s1 insertion depth = .125" to .157" (3,18mm to 3,99mm) lead dia accepted = .015" to .022" (0,38mm to 0,56mm) plating available = gg, gt part no. sc 1m1 ez 1m1 sc 1m2 ez 1m2 a (0,76) .030 (0,51) .020 z .010 (5,08) .200 (4,24) .167 insertion depth (sc- 1m1) = .095" to .145" (2,41mm to 3,68mm) insertion depth (sc- 1m2) = .080" to .105" (2,03mm to 2,67mm) lead dia accepted: .016" to .021" (0,41mm to 0,53mm) plating available = gg, gt sp 1s1 , sp 1s2 sc 4p1 ez 4p1 insertion depth = .105" to .170" (2,67mm to 4,32mm) lead dia accepted: .015" to .020" (0,38mm to 0,51mm) plating available = gg, gt, tt sc 3p1 ez 3p1 part no. sc 5p1 ez 5p1 sc 9p1 x dia (0,76) .030 (0,86) .034 plating available (sc-5p1, ez-5p1)= gg, gt, tt plating available (sc-9p1)= gg, gt insertion depth (sc-5p1) = .080" to .150" (2,03mm to 3,81mm) insertion depth (sc-9p1) = .070" to .165" (1,78mm to 4,19mm) lead dia accepted: .016" to .020" (0,41mm to 0,51mm) insertion depth (sp-1s1) = .090" to .140" (2,29mm to 3,56mm) insertion depth (sp-1s2) = .090" to .150" (2,29mm to 3,81mm) lead dia accepted = .020" to .025" (0,51mm to 0,64mm) plating available = gg, gt specifications: sc, sp, sk contact: becu shell: brass, except sk-5p1 phosphor bronze -gg plating: 30 " (0,76 m) au over 50 " (1,27 m) ni on contact; 10 " (0,25 m) au over 50 " (1,27 m) ni on shell -gt plating: 30 " (0,76 m) au over 50 " (1,27 m) ni on contact; sn over 50 " (1,27 m) ni on shell -tt plating: sn over 50 " (1,27 m) ni on contact; sn over 50 " (1,27 m) ni on shell current rating: 1 a contact resistance: 10 m ? max insertion force (sc): 9 oz (2,50n) avg, 16 oz (4,45n) max (.017" (0,43mm) dia probe) withdrawal force (sc): 2.5 oz (0,70n) avg, 1.5 oz (0,42n) min (after 12 insertions with .017" (0,43mm) dia probe) insertion force (ez): 2.5 oz (0,70n) avg, 5.5 (1,53n) oz max (.018" (0,46mm) dia probe except ez?p1 & ez?p1 with .017" (0,43mm) dia probe) withdrawal force (ez): 2.0 oz (0,56n) avg, 0.35 oz (0,10n) min (after 12 insertions with .018" (0,46mm) dia probe except ez?p1 & ez?p1 with .017" (0,43mm) dia probe) recommended pc hole size: lead size hole size (0,46) .018 dia (0,61) .024 dia (0,51) .020 dia (0,66) .026 dia (0,64) .025 dia (0,79) .031 dia (0,76) .030 dia (0,91) .036 dia (0,89) .035 dia (1,04) .041 dia (1,14) .045 dia (1,30) .051 dia (1,32) .052 dia (1,47) .058 dia (0,46) .018 sq (0,76) .030 dia (0,64) .025 sq (1,02) .040 dia (1,14) .045 sq (1,75) .069 dia (0,20) .008 x (0,71) .028 (0,89) .035 dia (0,25) .010 x (0,51) .020 (0,71) .028 dia (0,41) .016 x (0,51) .020 (0,79) .031 dia (0,41) .016 x (0,61) .024 (0,89) .035 dia (0,41) .016 x (0,79) .031 (1,04) .041 dia (1,83) .072 dia (1,32) .052 dia (0,51) .020 dia z (0,89) .035 a (1,83) .072 dia (1,52) .061 dia (0,76) .030 (0,71) .028 (1,32) .052 (5,16) .203 (1,83) .072 dia (1,32) .052 dia (2,41) .095 (4,83) .190 x (0,51) .020 (1,83) .072 dia (1,32) .052 dia (3,10) .122 (5,33) .230 (0,76) .030 (0,76) .030 dia (1,83) .072 dia (1,32) .052 dia (3,35) .132 (6,10) .240 (0,51) .020 (0,51) .020 dia (1,83) .072 dia (1,32) .052 dia (0,25) .010 (2,11) .083 (4,19) .165 (0,74) .029 dia sc 8p1 sp 1s1 (1,40) .055 dia (4,01) .158 (1,83) .072 dia (0,41) .016 sp 1s2 surface mount sockets sc, sk, sp series note: some sizes, styles and options are non-standard, non-returnable. insertion depth = .135" to .165" (3,43mm to 4,19mm) lead dia accepted = .025" to .030" (0,64mm to 0,76mm) plating available = gg, gt, tt sc 2p7 (0,51) .020 dia (7,87) .310 (3,18) .125 (1,52) .061 dia (0,79) .031 (2,16) .085 dia (1,78) .070 knurl (4,57) .180 (2,24) .088 (2,03) .080 dia (1,47) .058 dia
www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 supplement x = plating option (specify g or t) g = 10 " (0,25 m) gold on .165" (4,19mm) contact area. gold flash on balance t = 200 " (5,08 m) tin material: phosphor bronze lead sockets & terminals sc t, s sc 2p8 sc 2p9 sc 1w3 , sc 1p4 , sc 2p4 material : brass g = 20 " (0,51 m) gold t = 200 " (5,08 m) tin part no. sc 2p8 sc 2p9 y (6,10) .240 (6,86) .270 x dia (2,08) .082 (2,59) .102 part no. sc 1w3 sc 1p4 sc 2p4 y (12,95) .510 (3,18) .125 (12,95) .510 z ref (19,30) .760 (9,53) .375 (19,30) .760 x (0,64) .025 sq (0,76) .030 dia (0,91) .036 dia part no. s 1w1 1 s 1w1 2 s 1w1 3 y .010 (12,95) .510 (9,14) .360 (6,60) .260 z .015 (17,86) .703 (14,05) .553 (11,51) .453 material : brass g = 10 " (0,25 m) gold t = 200 " (5,08 m) tin t 1s5 t 1s6 s 1w1 t 1s2 part no. t 1s6 07 x 2 t 1s6 08 x 2 t 1s6 09 x 2 t 1s6 10 x 2 t 1s6 11 x 2 t 1s6 12 x 2 t 1s6 13 x 2 t 1s6 14 x 2 t 1s6 15 x 2 t 1s6 16 x 2 t 1s6 17 x 2 t 1s6 18 x 2 t 1s6 19 x 2 t 1s6 20 x 2 t 1s6 21 x 2 b (10,92) .430 (13,46) .530 (18,54) .730 (21,08) .830 (23,62) .930 (26,16) 1.030 (31,24) 1.230 (36,32) 1.430 (16,00) .630 (11,30) .445 (12,19) .480 (7,62) .300 (33.78) 1.330 (28,70) 1.130 (8,51) .335 pins are supplied on a bandolier. specifications: sc-1w3, 1p4, 2p4 contact: becu shell: brass -gg plating: 20 " (0,51 m) au over 50 " (1,27 m) ni on contact, except sc-2p4 30 " (0,76 m) au; 10 " au over 50 " (1,27 m) ni on shell -gt plating: 20 " (0,51 m) au over 50 " (1,27 m) ni on contact, except sc-2p4 30 " (0,76 m) au; sn over 50 " (1,27 m) ni on shell current rating: 5 a contact resistance: 10 m ? max insertion force: 6.5 oz (1,81n) avg, 13 oz (3,62n) max (.032" (0,81mm) dia probe) withdrawal force: 3 oz (0,83n) avg, 2 oz (0,56n) min (.032" (0,81mm) dia probe) specifications: sc-2p8, 2p9 contact: becu shell: brass -gg plating 20 " (0,51 m) au over 50 " (1,27 m) ni on contact; 10 " (0,25 m) au over 50 " (1,27 m) ni on shell -gt plating: 20 " (0,51 m) au over 50 " (1,27 m) ni on contact; 200 " (5,08 m) sn over 50 " (1,27 m) ni on shell current rating: 10 a contact resistance: 10 m ? max insertion force: sc-2p9 =32 oz (8,90n) max (.050" (1,27mm) dia probe); sc-2p8 =16 oz (4,45n) max (.040" (1,02mm) dia probe) withdrawal force: sc-2p9 2 oz (0,56n) min (.050" (1,27mm) dia probe) sc-2p8 =4 oz (1,11n) min (.040" (1,02mm) dia probe) specifications: t, s -g plating: au over 50 " (1,27 m) ni -t plating: sn over 50 " (1,27 m) ni or 100 " (2,54 m) cu current rating: 1a except t-1s6 is 5a insertion depth (sc-2p8) = .165" (4,91mm) to .220" (5,59mm) lead dia accepted (sc-2p8) = .035" (0,89mm) to .045" (1,14mm) insertion depth (sc-2p9) = .170" (4,32mm) to .205" (5,21mm) lead dia accepted (sc-2p9) = .045" (1,14mm) to .055" (1,40mm) plating available = gg, gt (1,65) .065 dia (1,37) .054 dia (0,64) .025 sq (15,37) .605 (0,38) .015 material : brass g = 20 " (0,51 m) gold t = 200 " (5,08 m) tin (1,83) .072 dia (1,55) .061 dia (1,32) .052 dia (0,64) .025 sq (12,95) .510 (17,86) .703 (0,71) .028 (0,76) .030 t 1s1 material : brass g = 20 " (0,51 m) gold t = 200 " (5,08 m) tin insertion depth = .175" (4,45mm) to .215" (5,46mm) lead dia accepted = .032" (0,81mm) to .038" (0,97mm) plating available = gg, gt (0,76) .030 y z x (1,98) .078 dia (2,28) .090 dia (2,18) .086 dia (0,71) .028 (0,76) .030 y (1,02) .040 dia x dia (3,05) .120 (9,91) .390 ref (1,83) .072 dia (0,89) .035 (0,71) .028 (1,55) .061 dia (1,32) .052 dia (0,64) .025 sq (12,95) .510 (17,86) .703 (1,91) .075 (1,27) .050 (1,83) .072 dia (1,55) .061 dia (1,32) .052 dia (0,64) .025 sq y z (0,71) .028 (0,76) .030 (1,07) .042 dia b (0,64) .025 sq note: some sizes, styles and options are non-standard, non-returnable. sc 1p1 gg t 1r0 g
|
