comus international bvba overhaamlaan 40 3700 tongeren, belgium phone: +32 12390400 fax: +32 12235754 email: info@comus.be www.comus.be datasheet gup 40008 mercury wetted reed relays page 1 www.comus.be rev. 0 ecn 08031301 comus international, belgium : + 32 (0)12 390 400, france : + 33 (0) 1 43 96 86 10, usa : + 1 973 777 6900 - assemtech, uk : +44 (0) 1255 862 236 features * miniature mercury wetted reed relay, single pole, form a * pcb mounting * fully encapsulated * plastic case technical data output data/contact data conditions unit max. switching power max dc/peakac resistive 50 w/va max. switching voltage max dc/peakac resistive 500 v max. switching current max dc/peakac resistive 2 a max. carry current max dc/peakac resistive 4 a max. contact resistance 50 mv, 10 ma 70 mohm life expectancy, min 1 v, 10 ma ops. contact material mercury 1 x 10 9 relay parameters conditions min typ max units insulation resistance between contacts between contact and coil at 500 v, 25c, 40% rh 10 10 10 10 ohms ohms capacitance across open contacts 0.5 0.6 pf open contact to coil 4.0 pf dielectric strength between contacts 1500 vdc/peak ac contacts to coil 1500 vac operate time at nominal coil voltage, 10 hz sq.w. 3.0 ms release time zener-diode suppression 2.0 ms input data/coil data conditions unit nominal voltage 12 v coil resistance +/- 10 % 800 ohm must operate / pull in 8.5 v must release / drop out 1.0 v nominal input power 180 mw
comus international bvba overhaamlaan 40 3700 tongeren, belgium phone: +32 12390400 fax: +32 12235754 email: info@comus.be www.comus.be datasheet gup 40008 mercury wetted reed relays page 2 www.comus.be rev. 0 ecn 08031301 comus international, belgium : + 32 (0)12 390 400, france : + 33 (0) 1 43 96 86 10, usa : + 1 973 777 6900 - assemtech, uk : +44 (0) 1255 862 236 dimensions in mm gup 40008 ordering information environmental ratings operating temperature -38.8 85 c storage temperature -40 105 c shock resistance 1/2 sine wave duration 11 ms 30 g vibration resistance 10 to 500 hz 10 g weight grams terminal solderability iec 68-2-20 test ta, method 1, solderbath temp 235c, immersion time 2 sec resistance to solder heat iec 68-2-20 test tb, method 1a, solderbath temp 260c, immersion time 10 sec top view 9,4 25,4 0,25 min 3,2 5,08 33 11,4 max 2,54 up
|
