spec no: dsaf2824 rev no: v.1 date: apr/25/2005 page: 1 of 5 approved: j. lu checked: joe lee drawn: h.q.yuan erp:1352000046 - 01 surface mount display features 0.56inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package:400pcs/ reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. package dimensions & internal circuit diagram apda56 - 41cgkwa - f01 green description the green source color devices are made with ingaalp on gaas substrate light emitting diode .
spec no: dsaf2824 rev no: v.1 date: apr/25/2005 page: 2 of 5 approved: j. lu checked: joe lee drawn: h.q.yuan erp:1352000046 - 01 selection guid e part no. dice lens type iv (ucd) @ 10ma min. typ. apda56 - 41cgkwa - f01 green (ingaaip) white diffused 8000 35500 common anode, rt. hand decimal description electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf2824 rev no: v.1 date: apr/25/2005 page: 3 of 5 approved: j. lu checked: joe lee drawn: h.q.yuan erp:1352000046 - 01 green apda56 - 41cgkwa - f01
spec no: dsaf2824 rev no: v.1 date: apr/25/2005 page: 4 of 5 approved: j. lu checked: joe lee drawn: h.q.yuan erp:1352000046 - 01 apda56 - 41cgkwa - f01 recommended soldering pattern (units : mm ) reel dimension tape specifications (units : mm )
spec no: dsaf2824 rev no: v.1 date: apr/25/2005 page: 5 of 5 approved: j. lu checked: joe lee drawn: h.q.yuan erp:1352000046 - 01 remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. packing & label specifications apda56 - 41cgkwa - f01
|
