oc086 ocxo series 1.0"x1.0" nominal thru-hole oven controlled xtal oscillator electronic adjustment standard specifications overall frequency 1 x 10 -8 over operating temperature range available operating temperature range 0 to +50 c to -30 to +70 c available supply voltage (vdc) +3.3 to +12 vdc available part numbering guide frequency in mhz frequency stability oc086 h 3 a 27 - 100.0m - xxx (internal code or blank) consult factory for available frequencies and specs. not all options available for all frequencies. a special p/n may be assigned. 27 = 2 x 10 -7 79 = 7 x 10 -9 17 = 1 x 10 -7 18 = 1 x 10 -8 frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com tbd aug 6, 2003 pl tronics, inc. mechanical: not to scale inches (mm) operating temperature range a: 0 to +50 c b: 0 to +70 c c: -10 to +70 c d: -20 to +70 c e: -30 to +70 c model series stability vs. temp vs. vdc / load aging 1 x 10 - 8 for 5% load or supply change 1 ppm max. for 10 years at 25 c 5 c at 10 mhz (consult factory for other frequencies) frequency adj electrical: 1 ppm typical logic h: hcmos s: sine wave p: pecl t: ttl due to part size and factory abilities, part marking may var y from lot to lot and may contain our part number or an inte rnal code. pl tronics , inc. 19013 36th ave. w, suite h lynnwood, wa 98036 usa manufacturer of high quality frequency control products . portions of the part number that appear after the frequency may not be marked on part (c of c provided) pletronics oc086 xxxxxx frequency date code supply voltage 3: +3.3 vdc 5: +5.0 vdc 12: +12.0 vdc output load (test circuit tbd) 10 ttl loads or 15pf 50 ohms phase noise consult factory jitter consult factory oven monitor consult factory hcmos sine wave output logic pecl logic ? 1 ? 90% of vcc min logic ? 0 ? 10% of vcc max output voltage levels supply current (icc) 2.0 watts typical steady state, 5.5 watts maximum at turn-on consult factory ttl consult factory 0 to +7 dbm standard frequencies: 10, 13, 80 & 100 mhz 10.00 mhz ? 100.00 mhz 1 2 5 4 3 pin 1 out pin 2 rf / case gnd pin 5 +vdc pin 4 n.c. pin 3 vcontrol .75 (19.05) 1.03 (26.16) max .025 .010 (.64) x .07 dia insulated riser 4x .75 (19.05) 1.03 (26.16) max .495 (12.57) max .25 .02 (6.35) .125 (3.18) lead .03 .003 dia (.76) 5x .50 (12.7) .375 (9.52) .50 (12.7) .25 (6.35) .125 (3.18) .25 (6.35)
|
