published date : apr 29,2005 drawing no : xdsa5529 v2 checked : b.l.liu p.1/3 part number: XZZY46W-3 subminiature solid state lamp www .sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. features subminiature package. wide viewing angle. gull wing lead. long life - solid state reliability. low package profile. package : 1000pcs / reel. rohs compliant . part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZZY46W-3 yellow ingaalp water clear 380 695 590 20 absolute maximum ratings (t a =25c ) ) ) ) zy (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 zy (ingaalp) unit forward voltage (typ.) (if=20ma) v f 2.3 v forward voltage (max.) (if=20ma) v f 2.8 v reverse current (vr=5v) i r 10 ua wavelength of peak emission (if=20ma) p 590 nm wavelength of dominant emission (if=20ma) d 589 nm spectral line full width at half-maximum (if=20ma) ? 20 nm capacitance (vf=0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) ) ) )
published date : apr 29,2005 drawing no : xdsa5529 v2 checked : b.l.liu p.2/3 part number: XZZY46W-3 subminiature solid state lamp www .sunled.com zy
published date : apr 29,2005 drawing no : xdsa5529 v2 checked : b.l.liu p.3/3 part number: XZZY46W-3 subminiature solid state lamp www .sunled.com recommended soldering pattern (units : mm; tolerance: 0.1) tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
|