unisonic technologies co., ltd ut136ff/fg triac www.unisonic.com.tw 1 of 6 copyright ? 2009 unisonic technologies co., ltd qw-r401-018,d triacs ? description glass passivated triacs in a full pack plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. typical applications include motor control, industrial and domestic lighting, heating and static switching. ? symbol lead-free: utc136ffl/utc136fgl halogen-free: utc136ffp/utc136fgp ? ordering information ordering number pin description normal lead free plating halogen free package 1 2 3 packing ut136ff-5-tf3-r ut136ffl-5-tf3-r ut136ffp-5-tf3-r to-220f mt1 mt2 g tube ut136ff-6-tf3-r ut136ffl-6-tf3-r ut136ffp-6-tf3-r to-220f mt1 mt2 g tube UT136FF-8-TF3-R ut136ffl-8-tf3-r ut136ffp-8-tf3-r to-220f mt1 mt2 g tube ut136fg-5-tf3-r ut136fgl-5-tf3-r ut136fgp-5-tf3-r to-220f mt1 mt2 g tube ut136fg-6-tf3-r ut136fgl-6-tf3-r ut136fgp-6-tf3-r to-220f mt1 mt2 g tube ut136fg-8-tf3-r ut136fgl-8-tf3-r ut136fgp-8-tf3-r to-220f mt1 mt2 g tube
ut136ff/fg triac unisonic technologies co., ltd 2 of 6 www.unisonic.com.tw qw-r401-018,d ? absolute maximum rating parameter symbol ratings unit ut136ff/fg-5 500(note2) ut136ff/fg-6 600(note2) repetitive peak off-state voltages ut136ff/fg-8 v drm 800 v rms on-state current full sine wave, t hs 92 c i t(rms) 4 a non-repetitive peak . on-state current full sine wave, t j =125 c prior to surge, with reapplied v drm(max) t =20 ms t =16.7 ms i tsm 25 27 a i 2 t for fusing (t =10 ms) i 2 t 3.1 a 2 s repetitive rate of rise of on-state current after triggering i tm =6 a, i g =0.2 a, di g /dt=0.2a/s t2 + g+ 50 t2 + g- 50 t2 - g- 50 t2 - g+ di t /dt 10 a/s peak gate voltage v gm 5 v peak gate current i gm 2 a peak gate power p gm 5 w average gate power (over any 20ms period) p g(av) 0.5 w operating junction temperature t j 125 c storage temperature t stg -40 ~ +150 c note 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings onl y and functional device oper ation is not implied. 2. although not recommended, off-st ate voltages up to 800v may be applied without damage, but the triac may switch to the on-state. the rate of rise of current should not exceed 3a/s. ? thermal data parameter symbol min typ max unit thermal resistance, junction to ambient (in free air) ja 55 k/w ? isolation limiting value & characteristic (t hs =25 c, unless otherwise specified) parameter symbol min typ max unit repetitive peak voltage form all three terminals to external heatsink (r.h. 65%,clean and dustfree) v isol 1500 v capacitance from mt2 to external heatsink (f =1mhz) c isol 12 pf ? static characteristics (t j =25c, unless otherwise specified) max parameter symbol test conditions min typ ut136ff ut136fg unit t2 + g+ 5 25 50 ma t2 + g- 8 25 50 ma t2 - g- 11 25 50 ma gate trigger current i gt v d =12 v,i t =0.1a t2 - g+ 30 70 100 ma t2 + g+ 7 20 30 ma t2 + g- 16 30 45 ma t2 - g- 5 20 30 ma latching current i l v d =12 v,i gt =0.1a t2 - g+ 7 30 45 ma holding current i h v d =12 v,i gt =0.1a 5 15 30 ma on-state voltage v t i t =5 a 1.4 1.70 v v d =12v, i t =0.1a 0.7 1.5 v gate trigger voltage v gt v d =400v, i t =0.1a, t j =125c 0.25 0.4 v off-state leakage current i d v d =v drm(max) , t j =125c 0.1 0.5 ma
ut136ff/fg triac unisonic technologies co., ltd 3 of 6 www.unisonic.com.tw qw-r401-018,d ? dynamic characteristics (t j =25 , unless otherwise specified) min parameter symbol test conditions ut136ff ut136fg typ max unit critical rate of rise of off-state voltage dv d /dt v dm = 67% v drm(max) ,t j =125c, exponential waveform, gate open circuit 50 200 250 v/s critical rate of change of commutating voltage dv com /dt v dm =400v, t j =95c,i t(rms) =4a, di com /dt=1.8a/ms ,gate open circuit 10 50 v/s gate controlled turn-on time t gt i tm =6a,v d = v drm(max) , i g =0.1a,di g/ dt=5a/ s 2 s
ut136ff/fg triac unisonic technologies co., ltd 4 of 6 www.unisonic.com.tw qw-r401-018,d ? typical characteristics junction temperature, t j (c) =180 =120 =80 =60 =30 8 7 6 5 4 3 2 1 0 012345 125 119.5 108.5 114 103 97.5 92 81 88.5 maximum on-state dissipation, p tot (w) rms on-state current, i t(rms) (a) maximum on-state dissipation, p tot vs rms on- state current,i t(rms) ,where =conduction angle i t i tsm time t j initial=125c max di t /dt limit t 2 g+ quadrant maximum permissible non-repetitive peak on-state current, i tsm (a) 1000 100 10 10us 100us 1ms 10ms 100ms pulse width, t p (s) maximum permissible non-repetitive peak on-state current,i tsm ,vs pulse width t p , for sinusoidal current,t p 20ms 92c maximum permissible rms current i t(rms) (a) 5 4 3 2 1 0 0 -50 50 100 150 heatsink temperature, t hs (c) t sp(max) /c maximum permissible rms current i t(rms) vs heatsink temperature t hs i t i tsm time t j initial=125c max maximum permissible non-repetitive peak on-state current,i tsm (a) 30 25 20 15 10 0 1 10 100 1000 number of cycles at 50hz maximum permissible non-repetitive peak on-state current,i tsm ,vs number of cycles, for sinusoidal current,f=50hz 5 0 2 4 6 8 0.01 0.1 1 10 surge duration, s maximum permissible repetitive rms on-state current,i t(rms) (a) 10 12 maximum permissible repetitive rms on- state current,i t(rms) ,vs surge duration, for sinusoidal current,f=50hz,t hs 92c 1.6 1.4 1 0.8 0.6 0.4 0 -50 50 100 150 normalised gate trigger voltage v gt (t j )/ v gt (25c), vs junction temperature t j 1.2 normalised gate trigger voltage, v gt (t j )/v gt (25c)
ut136ff/fg triac unisonic technologies co., ltd 5 of 6 www.unisonic.com.tw qw-r401-018,d ? typical characteristics(cont.) t t p p d bidirectional unidirectional with heatsink compound without heatsink compound 10 1 0.1 0.01 10us 0.1ms 1ms 10ms 0.1s 1s 10s pulse width, t p (s) transient thermal impedance vs pulse width ut136ff ut136fg off-state d v /dt limit 1000 100 10 1 050100150 typical commutation d v /dt vs junction temperature,parameter commutation di t /dt. the triac should commutate when the d v /dt is belowthe value on the appropriate curve for pre-commutation di t /dt junction temperature, t j (c) di com /dt= 5.1a/ms 3.9 3 1.4 1.8 2.3 3 2.5 1.5 2 1 0.5 0 -50 0 50 100 150 junction temperature, t j (c) normalised holding current i h (t j )/i h (25c),vs junction temperature t j max t j =125c t j =25c v o =1.27v r s =0.091ohms typ v t /v 1.5 2.5 2 3 0.5 1 0 0 2 4 6 8 10 12 typical and maximum on-state characteristic t2+g+ t2+g- t2-g- t2-g+ 3 2.5 1.5 2 1 0.5 0 -50 0 50 100 150 normalised gate trigger current i gt (t j )/i gt (25c),vs junction temperature t j 3 2.5 1.5 2 1 0.5 0 -50 0 50 100 150 normalised latching current i l (t j )/i l (25c),vs junction temperature t j junction temperature, t j (c) junction temperature, t j (c)
ut136ff/fg triac unisonic technologies co., ltd 6 of 6 www.unisonic.com.tw qw-r401-018,d utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
