preliminary data this is preliminary information on a new product now in deve lopment or undergoing evaluation. details are subject to change without notice. may 2009 doc id 15762 rev 1 1/7 7 STD830CP20 complementary transistor pair in a single package features low v ce(sat) simplified circuit design reduced component count low spread of dynamic parameters applications compact fluorescent lamp (cfl) 110 v mains description the STD830CP20 is a hybrid complementary pair of power bipolar transistors manufactured by using the high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. the STD830CP20 is housed in dual island dip-8 package with separated terminals for higher assembly flexibility, specifically recommended to be used in a new solution for compact fluorescent lamp (cfl). figure 1. internal schematic diagram dip-8 1 4 8 table 1. device summary order code marking package packing STD830CP20 d830cp20 dip-8 tube www.st.com
electrical ratings STD830CP20 2/7 doc id 15762 rev 1 1 electrical ratings note: for pnp types voltage and current values are negative table 2. absolute maximum ratings symbol parameter value unit npn pnp v cbo collector-base voltage (i e = 0) 400 300 v v ceo collector-emitter voltage (i b = 0) 200 v v ebo emitter-base voltage (i c = 0, i b = 1.5 a, t p < 10 ms) v (br)ebo v i c collector current 3 a i cm collector peak current (t p < 5 ms) 6 a i b base current 1.5 a i bm base peak current (t p < 1 ms) 3 a p tot total dissipation at t amb = 25 c single transistor tbd w p tot total dissipation at t amb = 25 c both transistors tbd w t stg storage temperature -65 to 150 c t j max. operating junction temperature 150 c table 3. thermal data symbol parameter value unit r thj-amb (1) 1. when mounted on 1 inch square pad of 2 oz. copper, t 10 sec. thermal resistance junction-ambient (single transistor) tbd c/w r thj-amb (1) thermal resistance junction-ambient (both transistors) tbd c/w
STD830CP20 electrical characteristics doc id 15762 rev 1 3/7 2 electrical characteristics (t case = 25c unless otherwise specified) note: for pnp types voltage and current values are negative table 4. electrical characteristics symbol parameter test cond itions min. typ. max. unit i ces collector cut-off current (v be = 0) for npn: v ce = 400 v v ce = 400 v t c = 125c for pnp: v ce = 300 v v ce = 300 v t c = 125c 0.1 0.5 0.1 0.5 ma ma ma ma v (br)ebo emitter-base breakdown voltage (i c = 0) i e = 10 ma for npn: for pnp: 9 6 18 12 v v v ceo(sus) (1) 1. pulsed: pulse duration = 300 s, duty cycle 1.5 % collector-emitter sustaining voltage (i b = 0) i c = 5 ma 200 v v ce(sat) (1) collector-emitter saturation voltage i c = 0.5 a i b = 0.05 a i c = 0.7 a i b = 0.1 a 400 400 mv mv v be(sat) (1) base-emitter saturation voltage i c = 0.5 a _ i b = 0.1 a i c = 1 a ____ i b = 0.2 a 1 1.1 v v h fe (1) dc current gain i c =10 ma v ce = 5 v i c =0.75 a v ce = 5 v i c =2 a v ce = 5 v 10 22 4 36 t r t s t f resistive load rise time storage time fall time i c = 0.7 a _ v cc = 150 v i b1 = 0.14 a _ i b2 = -0.14 a t p = 30 s 80 1.2 80 ns s ns t s t f inductive load storage time fall time i c = 1 a _ _ i b1 = 0.1 a v be(off) = -5 v r bb = 0 v clamp = 150 v l = 1 mh 120 50 ns ns
package mechanical data STD830CP20 4/7 doc id 15762 rev 1 3 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 5. dip-8 mechanical data dim. mm. min typ. max. a 4.80 a1 0.50 a2 3.10 3.50 a3 1.40 1.60 b 0.38 0.55 b1 0.38 0.51 b2 1.47 1.57 b3 0.89 1.09 c 0.21 0.35 c1 0.20 0.30 d 9.10 9.30 d1 0.13 e 7.62 8.25 e1 6.25 6.45 e2.54 ea 7.62 eb 7.62 10.90 ec 0 1.52 l 2.92 3.81
STD830CP20 package mechanical data doc id 15762 rev 1 5/7 figure 2. drawing dimension dip-8 8145726_a
revision history STD830CP20 6/7 doc id 15762 rev 1 4 revision history table 6. document revision history date revision changes 26-may-2009 1 initial release.
STD830CP20 doc id 15762 rev 1 7/7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2009 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
