led - chip preliminary 10.04.2007 rev. 05/06 radiation infrared typ. dimensions (m) typ. thickness cathode anode optical and electrical characteristics t amb = 25c, unless otherwise specified parameter test conditions symbol min typ max unit forward voltage i f = 20 ma v f 1.6 1.9 v reverse voltage i r = 100 a v r 5v radiant power 1 i f = 20 ma e 2.5 3.2 mw radiant power 2 i f = 20 ma e 6.0 mw peak wavelength i f = 20 ma p 790 800 815 nm spectral bandwidth at 50% i f = 20 ma ? 0.5 30 nm switching time i f = 20 ma t r , t f 40 ns 1 measured on bare chip on to-18 header with epigap equipment 2 measured on epoxy covered chip on to-18 header with epigap equipment labeling type e (typ) [mw] v f (typ) [v] el -800-25 packing: chips on adhesive film with wire-bond side on to p type ddh ELC-800-25 electrodes n (cathode) up technology algaas/algaas quantity lot n 150 (25) m gold alloy, 1.5 m gold alloy, 0.5 m dotted, 25% covered 325 280 240 led-04 epigap optoelektronik gmbh, d-12555 berlin, k?penicker str.325 b, haus 201 tel.: +49-30-6576 2543, fax : +49-30-6576 2545 1 of 1
|