specification model dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise, hold time voltage range frequency range efficiency (typ.) input inrush current (max.) leakage current safety standards harmonic current ems immunity working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over load ac current 200ms, 50ms, 16ms at full load 88 ~ 132vac/176 ~ 264vac selected by switch 47 ~ 63hz 80% 2.8a/115vac 1.7a/230vac cold start 20a/115vac 40a/230vac <3.5ma / 240vac 150 ~ 200% rated output power (ch1:19.2 ~ 29.2) protection type : fold back current limiting, recovers automaticall y after fault condition is removed tuv en60950-1 approved -10 ~ +60 20 ~ 90% rh non-condensing -20 ~ +85 , 5 ~ 95% rh 0.05%/ (0 ~ 50 ) on +5v output 10 ~ 500hz, 2g 10min./1cycle, 60min. each along x, y, z axes 267k hrs min. mil-hdbk-217f (25 ) 180*110*50mm (l*w*h) 203*115*50mm(l*w*h) with terminal & fixed ir on file name:MWP-608-spec 2004-12-01 ripple & noise (max.) note.2 voltage tolerance note.3 withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac i/p-o/p, i/p-fg :100m ohms/500vdc environment safety & emc (note 4) protection emi conduction & radiation MWP-608 5v ch1 12v ch2 24v ch3 10a 2a 1.25a 3 ~ 15a 0.2 ~ 4a 0.2 ~ 4a 104w 50mvp-p 120mvp-p 150mvp-p ch1: 4.75 ~ 5.5v 2.0% 8.0% 6.0% -5,+10% 0.5% 1.0% 1.0% 1.0% 6.0% features : m w p - 6 0 8 104w triple output switching power supply output number compliance to en55022 (cispr22) class b universal ac input/full range protections:short circuit/over load cooling by free air convection 2 years warranty 0.9kg; 16pcs/15.4kg/0.95cuft 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. load regulation is measured from 20% to 100% rated load, and other output at 6 0% rated load. 5. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still mee ts emc directives. operating display function double color led correct range: green(5~5.4vref.); wrong range: red compliance to en60555-2,-3 compliance to en61000-4-2,3,4,5 light industry level, criteria a
|
