View MCR100_3345744.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a thick film chip resistors mcr series ? features 1) full line up from ultra small size (01005) to 2512 with jumper type. 2) high reliability metal glazed thick film. 3) rohm resistors have obtained is o9001/iso/ts16949 certification. 4) "automotive" product is aec-q200 compliant. part no. resistance range packing specification quantity / ree l (mm) type code size general purpose paper tape (2mm pitch) paper tape (2mm pitch) paper tape (4mm pitch) embossed tape (1mm pitch) embossed tape (4mm pitch) 0402 0603 1005 1608 2012 3216 3225 5025 6432 ? please contact us for status of aec-q200 on "general purpose" products. 01005 10 to 3m 1 to 10m 1 to 10m 1 to 10m 1 to 10m 1 to 10m 1 to 3.3m 1 to 560k 1 to 100k 0201 0402 0603 0805 1206 yrt rzp yzp 15,000 40,000 15,000 10,000 5,000 4,000 mrt ert ert ert yzp ? ? mzp ezp ezp ezp 1210 jzh jzh jzh 2010 2512 mcr004 mcr006 mcr01 mcr03 mcr10 mcr18 mcr25 mcr50 MCR100 (inch) automotive ? corresponds to aec ? q200 ? part number description 06 mcr (micro chip resistors) 0 yt r c mr part no. resistance code, 3 or 4 digits. 000 denotes jumper type. ex.) 1 = 1r0 ( 5% ) 9.1 = 9r1 ( 5% ) 10 = 10r0 ( 0.5%, 1% ) 100 ( 5% ) 2.2m = 2204 ( 1% ) 225 ( 5% ) d,f j : : 4 digits 3 digits resistance tolerance resistance code 004 (0402 [01005]) 006 (0603 [0201]) 01 (1005 [0402]) 03 (1608 [0603]) 10 (2012 [0805]) 18 (3216 [1206]) 25 (3225 [1210]) 50 (5025 [2010]) 100 (6432 [2512]) d ( 0.5% ) f ( 1% ) fx ( 1% ) ? only mcr03ezp j ( 5% ) (including jumper type) size (mm [inch]) resistance tolerance nominal resistance j0 1 0 type code
2/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < general purpose > ? products list limiting element voltage (v) maximum overload voltage (v) temperature coefficient (ppm / c ) resistance tolerance (%) operating temperature range ( c ) type code resistance range series part no. rated power (70 c) (w) mcr004 yzp, rzp mcr006 yrt 0.031 15 jumper type : rmax = 50m / imax. = 0.5a jumper type : rmax = 50m / imax. = 0.5a jumper type : rmax = 50m / imax. = 1a jumper type : rmax = 50m / imax. = 1a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 3a jumper type : rmax = 50m / imax. = 4a ? design and specifications are subject to change without notice. carefully check the specification sheet supplied with the produ ct before using or ordering it. 300 j( 5%) j( 5%) f( 1%) 25 50 50 150 200 200 200 200 400 400 400 400 200 100 ? ? ? 0.05 mrt ert ert ert jzh jzh jzh mcr01 mcr03 mcr10 mcr18 mcr25 mcr50 MCR100 0.063 0.1 0.125 0.25 0.25 0.5 1 250 300 250 600 / ? 200 + 500 / ? 250 250 250 200 1.0 to 9.1 10 to 10m 10 to 10m 10 to 1m f( 1%) d( 0.5%) j( 5%) f( 1%) d( 0.5%) j( 5%) f( 1%) j( 5%) f( 1%) j( 5%) j( 5%) j( 5%) f( 1%) f( 1%) f( 1%) j( 5%) f( 1%) 10 to 91 100 to 3m 10 to 91 100 to 3m e24 e24 e24 e24 ? 55 to + 125 ? 55 to + 155 ? 55 to + 125 e24 e24 e24 e24 d( 0.5%) 100 100 200 200 1.0 to 9.1 10 to 976k 10 to 1m 1m to 2.2m 10 to 10m e24 e24,e96 e24 e24,e96 e24 e24 e24,e96 e24,e96 e24 e24 e24,e96 e24,e96 e24 e24 e24,e96 e24,e96 e24 e24 e24 e24,e96 e24,e96 e24 e24 e24 e24,e96 e24 e24 e24 e24 e24,e96 e24 e24 500 350 500 200 100 400 200 100 200 1.0 to 9.1 10 to 10m 10 to 976k 1m to 2.2m 1.0 to 9.1 10 to 10m 10 to 976k 1m to 2.2m 1.0 to 2.0 2.2 to 5.1 5.6 to 3.3m 10 to 1m 400 200 100 200 500 350 200 100 350 500 1.0 to 2.0 10 to 330k 10 to 180k 360k to 560k 2.2 to 9.1 1.0 to 2.0 10 to 22 10 to 82k 24 to 100k 2.2 to 9.1 500 350 350 100 200 500 400 100 100 200 200 1.0 to 9.1 10 to 976k 10 to 1m 1m to 10m 10 to 10m
3/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < general purpose > ? chip resistor dimensions and markings there are three or four digi ts used for the calculation number according to iec code and ?r?is used for the decimal point. part no. type code (mm) (inch) l w t a b marking existence (unit : mm) mcr004 yzp,rzp 0402 01005 0.4 0.02 0.2 0.02 0.13 0.02 0.1 0.03 0.1 0.03 no mcr006 yrt 0603 0201 0.6 0.03 0.3 0.03 0.23 0.03 0.15 0.05 0.15 0.05 no mcr01 mrt 1005 0402 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.1 no mcr03 ert 1608 0603 1.6 0.1 0.8 0.1 0.45 0.1 0.3 0.2 0.3 0.2 yes ? mcr10 ert 2012 0805 2.0 0.1 1.25 0.1 0.5 0.1 0.35 0.2 0.35 0.2 yes mcr18 ert 3216 1206 3.05 0.15 1.55 0.15 0.55 0.1 0.45 0.25 0.35 0.25 yes mcr25 jzh 3225 1210 3.2 0.15 2.5 0.15 0.55 0.15 0.5 0.25 0.5 0.25 yes mcr50 jzh 5025 2010 5.0 0.15 2.5 0.15 0.55 0.15 0.6 0.25 0.6 0.25 yes MCR100 jzh 6432 2512 6.3 0.15 3.2 0.15 0.55 0.15 0.6 0.25 0.6 0.25 yes 0.25 + 0.05 ? 0.1 m arking method of jumper type jumper type marking existenc e no yes mcr004 / 006 / 01 / 25 / 50 / 100 mcr03 / 10 / 18 ? marking method of mcr03 the description of markings on the ch ip resistor are as shown below. marking method (j class): the nominal resistance is expre ssed in by e-24series 3 digits. the first 2 digits apply to the resist ance value and the last one indicates the number of zeros to follow. the r is used as a decimal point. example 100k ?? = 104 marking method (f/d class): ? for the resistance value contained in e96 series. the nominal resistance is expressed in 3 digits. the first 2 digits is symbol to the resistance value and the last one is symbol to multipliers. example : 100k ?? = 01d (01d ? 100 10 3 = 100,000 ?? = 100k ? ) example : 3.01k ?? = 47b (47b ? 301 10 1 = 3010 ?? = 3.01k ? ) ? for the resistance value not cont ained in e96 series and contained in e-24 series. the marking is expressed by e-24 se ries in 3 digits and one short bar under the last marking letter. example : 390 ?? = 391 ? land pattern example b d a land c s ymbol for e96 series nominal resistance value symbol e96 symbol e96 symbol e96 symbol e96 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 s ymbol for multipliers symbol a b c d e f x y multipliers 10 0 10 1 10 2 10 3 10 4 10 5 10 ? 1 10 ? 2 b 103 l w t a dimensions part no. type code a mcr004 mcr006 mcr01 mcr03 mcr10 mcr18 mcr25 mcr50 MCR100 yzp,rzp 0.2 yrt mrt ert ert ert jzh jzh jzh 0.3 0.5 0.5 1.2 2.2 2.2 3.8 5.1 b 0.4 0.84 1.3 1.3 2.6 4.0 4.0 6.0 8.1 c 0.16 0.3 0.5 0.5 1.15 1.5 2.3 2.3 3.0 d 0.1 0.27 0.4 0.4 0.7 0.9 0.9 1.1 1.5 (unit : mm)
4/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < general purpose > ? derating curve when the ambient temperature ex ceeds 70c, power dissipation must be adjust ed according to the derating curves below. 0 20 40 60 80 100 ? 55 0 70 100 125 ambient temperature ( c) percent rated power (%) mcr004 / 006 / 100 ? characteristics test items test conditions resistor type guaranteed value jumper type resistance variation of resistance with temperature solderability damp heat, steady state endurance at 70 c endurance rapid change of temperature bend strength of the end face plating resistance to solvent resistance to soldering heat overload (2.0% + 0.1 ) max. 50m (1.0% + 0.05 ) (3.0% + 0.1 ) max. 50m max. 100m see p.1 see p.1 20 c no remarkable abnormality on the appearance. a new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. without mechanical damage such as breaks. compliance standard(s) : iec60115 ? 8 jisc 5201 ? 8 measurement : + 20 / ? 55 / + 20 / + 125 c soldering condition : 260 5 c duration of immersion : 10 1s 40 c, 93%rh test time : 1,000h to 1,048h (3.0% + 0.1 ) (3.0% + 0.1 ) (1.0% + 0.05 ) (1.0% + 0.05 ) (1.0% + 0.05 ) max. 100m max. 100m max. 50m max. 50m max. 50m 70 c rated voltage (current) 1.5h : on ? 0.5h : off test time : 1,000h to 1,048h 125 c (mcr004 / 006 / 25 / 50 / 100) 155 c (mcr01 / 03 / 10 / 18) test time : 1,000h to 1,048h 23 5 c , immersion cleaning, 5 0.5min solvent : 2 ? propanol ? test temp. ? 55 c to + 125 c 100cyc (mcr004 / 006) ? 55 c to + 125 c 300cyc (mcr01) ? 55 c to + 125 c 5cyc (mcr03 / 10 / 18 / 25 / 50 / 100) rosinethanol (25%wt) soldering condition : 235 5 c duration of immersion : 2.0 0.5s rated voltage (current) 2.5, 2s. limiting element voltage 2 : (see p.1) ? technical data parameter unit mcr004 yzp / rzp mcr006 yrt mcr01 mrt mcr03 ert mcr10 ert mcr18 ert mcr25 jzh mcr50 jzh MCR100 jzh m ? fit mg/pc 0.0038 0.04 1000 1000 1000 1000 0.0185 0.150 0.0185 0.565 0.0185 2.03 0.0185 4.73 1000 0.0185 8.56 1000 0.0203 16.5 1000 0.0201 25.8 1000 0.0586 42.0 insulation resistance failure rate weight mcr01 / 03 / 10 / 18 / 25 / 50 0 20 40 60 80 100 ? 55 0 70 100 155 ambient temperature ( c) percent rated power (%)
5/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < general purpose > ? tape dimensions ? paper tape ? embossed tape p 0 p 2 b 0 a 0 e f w d 0 p 1 t 2 base embossed top tape components pocket a 0 p 1 p 0 p 2 b 0 f w t 2 e d 0 p 0 p 2 p 1 e f w t 2 d 0 a 0 b 0 base paper (bottom tape) components cavity top tape 0.24 0.03 0.45 0.03 0.38 0.03 0.68 0.03 0.7 0.1 1.2 0.1 1.0 0.1 1.8 0.1 1.55 0.1 2.3 0.1 1.9 0.2 3.5 0.2 (unit : mm ) w type code part no. f e a 0 b 0 8.0 0.2 mcr004 yzp 3.5 0.05 1.75 0.1 8.0 0.2 mcr006 yrt 3.5 0.05 1.75 0.1 8.0 0.3 mcr01 mrt 3.5 0.05 1.75 0.1 8.0 0.3 mcr03 ert 3.5 0.05 1.75 0.1 8.0 0.3 mcr10 ert 3.5 0.05 1.75 0.1 8.0 0.3 mcr18 ert 3.5 0.05 1.75 0.1 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 2.0 0.05 max 0.5 2.0 0.05 max 0.5 2.0 0.05 2.0 0.05 2.0 0.05 2.0 0.05 max 1.1 max 1.1 max 1.1 max 1.1 d 0 type code part no. p 0 p 1 p 2 t 2 mcr004 yzp 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 2.0 0.05 mcr006 yrt 2.0 0.05 mcr01 mrt 2.0 0.1 mcr03 ert 4.0 0.1 mcr10 ert 4.0 0.1 mcr18 ert 4.0 0.1 0.23 0.02 0.43 0.02 3.0 0.1 3.5 0.1 3.4 0.2 5.6 0.2 3.5 0.2 6.7 0.2 (unit : mm ) w type code part no. f e a 0 b 0 4.0 0.05 mcr004 rzp 1.8 0.02 0.9 0.05 8.0 0.3 mcr25 jzh 3.5 0.05 1.75 0.1 12 0.3 mcr50 jzh 5.5 0.05 1.75 0.1 12 0.3 MCR100 jzh 5.5 0.05 1.75 0.1 0.8 0.04 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.0 0.02 0.2 0.02 2.0 0.05 max 1.1 2.0 0.05 2.0 0.05 max 1.1 max 1.1 d 0 type code part no. p 0 p 1 p 2 t 2 mcr004 rzp 2.0 0.04 4.0 0.1 4.0 0.1 4.0 0.1 1.0 0.02 mcr25 jzh 4.0 0.1 mcr50 jzh 4.0 0.1 MCR100 jzh 4.0 0.1
6/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < general purpose > ? reel dimensions a type code part no. b c d (unit : mm) 13 0.2 178 1.0 mcr004 rzp 60 1.0 5 + 1.0 ? 0.6 c abd label 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd label according to eiaj et-7200b according to eiaj rrm-048c a type code part no. b c d (unit : mm) 13 0.2 180 0 ? 1.5 60 + 1.0 0 mcr004 yzp mcr006 yrt mcr01 mrt mcr03 ert mcr10 ert mcr18 ert mcr25 jzh mcr50 jzh MCR100 jzh 9 + 1.0 0 13 + 1.0 0
7/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < automotive > ? products list limiting element voltage (v) maximum overload voltage (v) temperature coefficient (ppm / c ) resistance tolerance (%) operating temperature range ( c ) type code resistance range series part no. rated power (70 c) (w) mcr006 yzp mcr01 mzp 0.05 25 jumper type : rmax = 50m / imax. = 0.5a jumper type : rmax = 50m / imax. = 1a jumper type : rmax = 50m / imax. = 1a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 2a jumper type : rmax = 50m / imax. = 3a jumper type : rmax = 50m / imax. = 4a ? design and specifications are subject to change without notice. carefully check the specification sheet supplied with the produ ct before using or ordering it. 50 50 150 200 200 400 400 200 300 100 ? ? 0.063 ezp ezp ezp jzh jzh mcr03 mcr10 mcr18 mcr25 MCR100 0.1 0.1 0.125 0.25 1 400 j( 5%) fx( 1%) d( 0.5%) j( 5%) f( 1%) j( 5%) j( 5%) f( 1%) f( 1%) ? 55 to + 125 ? 55 to + 155 ? 55 to + 125 d( 0.5%) 100 50 100 200 1.0 to 9.1 10 to 10m 100 to 1m 10 to 91 10 to 10m e24 e24,e96 e24 e24 e24 e24 e24,e96 e24 e24 e24 e24 e24,e96 e24 e24 e24 e24 e24,e96 e24 e24 1.0 to 2.0 2.2 to 5.1 5.6 to 3.3m 500 350 500 200 + 600 / ? 200 j( 5%) f( 1%) d( 0.5%) 250 100 200 250 1.0 to 9.1 10 to 10m 1k to 1m 10 to 910 10 to 10m e24 e24 e24 e24 e24 + 500 / ? 250 j( 5%) f( 1%) d( 0.5%) 100 50 100 200 1.0 to 9.1 10 to 2.2m 100 to 1m 10 to 91 10 to 10m e24 e24,e96 e24 e24 e24 500 350 350 100 200 500 1.0 to 2.0 10 to 22 10 to 82k 24 to 100k 2.2 to 9.1 200 400 jzh mcr50 0.5 j( 5%) f( 1%) e24 e24 e24,e96 e24 e24 500 350 200 100 350 500 1.0 to 2.0 10 to 330k 10 to 180k 360k to 560k 2.2 to 9.1 400 100 50 100 200 1.0 to 9.1 10 to 2.2m 100 to 1m 10 to 91 10 to 10m 200 400 0.125 0.25 j( 5%) f( 1%) d( 0.5%) e24 e24,e96 e24 e24 e24 400 100 50 100 200 1.0 to 9.1 10 to 2.2m 100 to 1m 10 to 91 10 to 10m 10 to 1m 100
8/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < automotive > ? chip resistor dimensions and markings there are three or four digi ts used for the calculation number according to iec code and ?r?is used for the decimal point. part no. type code (mm) (inch) l w t a b marking existence (unit : mm) mcr006 yzp 0603 0201 0.6 0.03 0.3 0.03 0.23 0.03 0.1 0.05 0.15 0.05 no mcr01 mzp 1005 0402 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.1 no mcr03 ezp 1608 0603 1.6 0.1 0.8 0.1 0.45 0.1 0.3 0.2 0.3 0.2 yes ? mcr10 ezp 2012 0805 2.0 0.1 1.25 0.1 0.55 0.1 0.4 0.2 0.4 0.2 yes mcr18 ezp 3216 1206 3.2 0.15 1.6 0.15 0.55 0.1 0.5 0.25 0.5 0.25 yes mcr25 jzh 3225 1210 3.2 0.15 2.5 0.15 0.55 0.15 0.5 0.25 0.5 0.25 yes mcr50 jzh 5025 2010 5.0 0.15 2.5 0.15 0.55 0.15 0.6 0.25 0.6 0.25 yes MCR100 jzh 6432 2512 6.3 0.15 3.2 0.15 0.55 0.15 0.6 0.25 0.6 0.25 yes 0.25 + 0.05 ? 0.1 marking method of jumper type jumper type mcr006 / 01 / 25 / 50 / 100 mcr03 / 10 / 18 no yes marking existence ? marking method of mcr03 for mcr03 series resistors, the printing process re stricts the marking to th ree digits/characters. consequently, 1% tolerance resistors with values fr om the e24 series will be marked the same as 5% resistors with the same value, but 1% tolerance resistors with values from the e96 series will not be marked. examples: mcr03ezpj243 (5% tolerance, e24 / 24 k ? ) marking = 243 mcr03ezpfx2402 (1% tolerance, e24 / 24 k ? ) marking = 243 mcr03ezpfx2432 (1% tolerance, e96 / 24.3 k ? ) no marking mcr18ezpj243 (5% tolerance, e24 / 24 k ? ) marking = 243 mcr18ezpf2402 (1% tolerance, e24 / 24 k ? ) marking = 2402 mcr18ezpf2432 (1% tolerance, e96 / 24.3 k ? ) marking = 2432 ? land pattern example b d a land c b 103 l w t a dimensions part no. type code a mcr006 mcr01 mcr03 mcr10 mcr18 mcr25 mcr50 MCR100 yzp mzp ezp ezp ezp jzh jzh jzh 0.3 0.5 0.5 1.2 2.2 2.2 3.8 5.1 b 0.84 1.3 1.3 2.6 4.0 4.0 6.0 8.1 c 0.3 0.5 0.5 1.15 1.5 2.3 2.3 3.0 d 0.27 0.4 0.4 0.7 0.9 0.9 1.1 1.5 (unit : mm)
9/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < automotive > ? derating curve when the ambient temperature ex ceeds 70c, power dissipation must be adjust ed according to the derating curves below. 0 20 40 60 80 100 ? 55 0 70 100 125 ambient temperature ( c) percent rated power (%) mcr006 / 100 ? characteristics test items test conditions resistor type guaranteed value jumper type resistance variation of resistance with temperature solderability damp heat, steady state endurance at 70 c endurance rapid change of temperature bend strength of the end face plating resistance to solvent resistance to soldering heat overload (2.0% + 0.1 ) max. 50m (1.0% + 0.05 ) (3.0% + 0.1 ) max. 50m max. 100m see p.1 see p.1 20 c no remarkable abnormality on the appearance. a new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. without mechanical damage such as breaks. compliance standard(s) : iec60115 ? 8 jisc 5201 ? 8 measurement : + 20 / ? 55 / + 20 / + 125 c soldering condition : 260 5 c duration of immersion : 10 1s 40 c, 93%rh test time : 1,000h to 1,048h (3.0% + 0.1 ) (3.0% + 0.1 ) (1.0% + 0.05 ) (1.0% + 0.05 ) (1.0% + 0.05 ) max. 100m max. 100m max. 50m max. 50m max. 50m 70 c rated voltage (current) 1.5h : on ? 0.5h : off test time : 1,000h to 1,048h 125 c (mcr006 / 25 / 50 / 100) 155 c (mcr01 / 03 / 10 / 18) test time : 1,000h to 1,048h 23 5 c , immersion cleaning, 5 0.5min solvent : 2 ? propanol ? test temp. ? 55 c to + 125 c 100cyc (mcr006 / 01 / 03) ? 55 c to + 125 c 5cyc (mcr10 / 18 / 25 / 50 / 100) rosinethanol (25%wt) soldering condition : 235 5 c duration of immersion : 2.0 0.5s rated voltage (current) 2.5, 2s. limiting element voltage 2 : (see p.1) ? technical data parameter unit mcr006 yzp mcr01 mzp mcr03 ezp mcr10 ezp mcr18 ezp mcr25 jzh mcr50 jzh MCR100 jzh m fit mg/pc 1000 1000 1000 1000 0.0016 0.157 0.0002 0.70 0.0009 2.12 0.0015 5.03 1000 0.0018 9.46 1000 0.0203 16.5 1000 0.0201 25.8 1000 0.0586 42.0 insulation resistance failure rate weight mcr01 / 03 / 10 / 18 / 25 / 50 0 20 40 60 80 100 ? 55 0 70 100 155 ambient temperature ( c) percent rated power (%)
10/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < automotive > ? tape dimensions ? paper tape ? embossed tape a 0 p 1 p 0 p 2 b 0 f w t 2 e d 0 p 0 p 2 p 1 e f w t 2 d 0 a 0 b 0 b ase paper (bottom tape) components cavity top tape 0.38 0.03 0.68 0.03 0.7 0.1 1.2 0.1 1.1 0.1 1.9 0.1 (unit : mm ) w type code part no. f e a 0 b 0 8.0 0.2 mcr006 yzp 3.5 0.05 1.75 0.1 8.0 0.3 mcr01 mzp 3.5 0.05 1.75 0.1 8.0 0.3 mcr03 ezp 3.5 0.05 1.75 0.1 8.0 0.3 mcr10 ezp 3.5 0.05 1.75 0.1 8.0 0.3 mcr18 ezp 3.5 0.05 1.75 0.1 1.5 + 0.1 0 1.65 + 0.2 ? 0.1 2.4 + 0.2 ? 0.1 3.5 + 0.15 ? 0.05 1.95 + 0.1 ? 0.05 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 2.0 0.05 max 0.5 2.0 0.05 2.0 0.05 2.0 0.05 2.0 0.05 max 1.1 max 1.1 max 1.1 max 1.1 d 0 type code part no. p 0 p 1 p 2 t 2 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 4.0 0.1 mcr006 yzp 2.0 0.05 mcr01 mzp 2.0 0.05 mcr03 ezp 4.0 0.1 mcr10 ezp 4.0 0.1 mcr18 ezp 4.0 0.1 3.0 0.1 3.5 0.1 3.4 0.2 5.6 0.2 3.5 0.2 6.7 0.2 (unit : mm ) w type code part no. f e a 0 b 0 8.0 0.3 mcr25 jzh 3.5 0.05 1.75 0.1 12 0.3 mcr50 jzh 5.5 0.05 1.75 0.1 12 0.3 MCR100 jzh 5.5 0.05 1.75 0.1 1.5 + 0.1 0 1.5 + 0.1 0 1.5 + 0.1 0 2.0 0.05 max 1.1 2.0 0.05 2.0 0.05 max 1.1 max 1.1 d 0 type code part no. p 0 p 1 p 2 t 2 4.0 0.1 4.0 0.1 4.0 0.1 mcr25 jzh 4.0 0.1 mcr50 jzh 4.0 0.1 MCR100 jzh 4.0 0.1
11/11 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.03 - rev. a data sheet mcr series < automotive > ? reel dimensions 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd label according eiaj et-7200b a type code part no. b c d (unit : mm ) 13 0.2 180 0 ? 1.5 60 + 1.0 0 mcr006 yzp mcr01 mzp mcr03 ezp mcr10 ezp mcr18 ezp mcr25 jzh mcr50 jzh MCR100 jzh 9 + 1.0 0 13 + 1.0 0
r1120a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specied herein is subject to change for improvement without notice. the content specied herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when design ing circuits for mass production. great care was taken in ensuring the accuracy of the information specied in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specied herein is intended only to show the typical functions of and examples of application circuits for the produc ts. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specied in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, ofce-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specied in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, re or any other damage caused in the event of the failure of any product, such as derating, redundancy, re control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specied herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.

▲Up To Search▲

Price & Availability of MCR100

	To Download MCR100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .