View EDSX6-117I_3323532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

specifications data sheet fkd ... 4 remote seal type differential pressure transmitter the fcx a 2 differential pressure transmitter accurately measures differential pressure, liquid level or gauge pressure and transmits a proportional 4 to 20ma signal. the trans- mitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. totally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions. 1. high accuracy 0.2% accuracy for all calibrated spans is a standard feature for all dp models covering 0.32kpa {3.2mbar} range to 500kpa {5bar} high differential pressure range. 0.1% accuracy is available as option. fuji? micro- capacitance silicon sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjustment. 2. minimum environmental influence the ?dvanced floating cell?design which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications. 3. fuji/hart bilingual communications protocol and foundation fieldbus and profibus compatibil- ity fcxa 2 series transmitter offers bilingual communi- cations to speak both fuji proprietary protocol and hart . any hart compatible devices can commu- nicate with fcxa 2 . further, by upgrading electron- ics foundation fieldbus and profibus are also available. 4. application flexibility various options that render the fcx a 2 suitable for almost any process applications include: analog indicator at either the electronics side or terminal side full range of hazardous area approvals built-in rfi filter and lightning arrester 5-digit lcd meter with engineering unit stainless steel electronics housing wide selection of materials high temperature, high vacuum seals 5. programmable output linearization function in addition to linear and square root, output signal can be freely programmable. (up to 14 compensated points at approximation.) 6. burnout current flexibility (under scale: 3.2 to 3.8ma, over scale: 20.8 to 21.6ma) burnout signal level is adjustable using model fxw hand held communicator (hhc) to comply with namur ne43. 7. dry calibration without reference pressure thanks to the best combination of unique construction of mechanical parts (sensor unit) and high performance electronics circuit (electronics unit), reliability of dry calibration without reference pressure is at equal level as wet calibration. remark : to minimize environmental influence, span should be greater than 1/40 of the max. span in most applications. lower limit of static pressure (vacuum limit), silicone fill sensor: see fig. 1 fluorinated fill sensor: atmospheric pressure the maximum span of each sensor can be converted to different units using factors as below. 1mpa =10 3 kpa=10bar=10.19716kgf/cm 2 =145.0377psi 1kpa=10mbar=101.976mmh 2 o=4.01463h 2 o overrange limit: to maximum static pressure limit output signal: 4 to 20ma dc (linear or square root) with digital signal superimposed on the 4 to 20ma signal power supply: transmitter operates on 10.5v to 45v dc at transmitter terminals. 10.5v to 32v dc for the units with optional arrester. features functional specifications service: liquid, gas, or vapour static pressure, span, and range limit: } up to flange rating f k d 3 f k d 5 f k d 6 +/?32 {+/?320} +/?130 {+/?1300} +/?500 {+/?5000} 0.32 { 3.2 } 1.3 { 13 } 5 { 50 } 32 { 320 } 130 { 1300 } 500 { 5000} min. type range limit [kpa] {m bar} span limit [kpa] (m bar} max. static pressure date EDSX6-117I jun. 1, 2006
fkd ... 4 2 load limitations: see figure below note: for communication with hhc (1) (model: fxw), min. of 250 ? is required. hazardous locations: 2000 [ ? ] 1500 1000 load resistance 500 250 0 1533 ? 600 ? operating area 24v 45v 10 16.1 50 [ v ] 10.5v power voltage a tex ex ii 2 gd eex d iic t6 ip66/67 t85 c tamb = 40 c to +65 c eex d iic t5 ip66/67 t100 c tamb = 40 c to +85 c factory mutual class i div.1 groups b, c, d t6 type 4x class ii iii div.1 groups e, f, g t6 type 4x tamb max = +60 c csa class i div.1 groups c, d class ii div.1 groups e, f, g class iii div.1 note) ?eal not required?enclosure is allowed. tiis ex do iib+h 2 t4 tamb max = +55 c maximum process temp. = +120 c iecex scheme /saa ex d iic t5 ip66/67 pending tamb = 40 c to +85 c ex d iic t6 ip66/67 pending tamb = 40 c to +65 c authorities flameproof a tex ex ii 1 gd eex ia iic t5 tamb = 40 c to +40 c eex ia iic t4 tamb = 40 c to +80 c entity parameters: ui=28v, ii=93.3ma, pi=0.66w, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.134mh factory mutual class i ii iii div.1 groups a, b, c, d, e, f, g t4 entity type 4x entity parameters: vmax=42.4v, imax=113ma, pi=1w, ci=34.2nf, li=1.134mh csa class i div.1 groups a, b, c, d class ii div.1 groups e, f, g class iii div.1 temp code t4 tamb max = +40 c temp code t3c tamb max = +85 c entity parameters: vmax=28v, imax=93ma, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.4mh tiis ex ia iic t4 tamb max = +60 c entity parameters: ui=28v, ii=94.3ma, pi=0.66w, ci=32.6nf, li=1.134mh iecex scheme /saa ex ia iic t4 ip66/67 tamb = 40 c to +70 c ex ia iic t5 ip66/67 tamb = 40 c to +50 c entity parameters: ui=28v, ii=93.3ma, pi=0.66w, ci=0.033 f, li=1.034mh authorities intrinsic safety model code 9th digit 13th digit a,b,c,d,j y,g,h,j,s,t,k 40 c to +85 c l,p,m,1,2,3 y,g,h,j,s,t,k 20 c to +80 c q ,s,n,4,5,6 y,g,h,j,s,t,k 20 c to +60 c e,f,g,h,k y,g,h,j,s,t,k 40 c to +60 c w,a,d ?0 c to +60 c t amb
3 loop-check output: transmitter can be configured to provide constant signal 3.8ma through 21.6ma by hhc (1) . temperature limit: ambient: ?40 to + 85 c (?20 to + 80 c for lcd indicator) (?40 to + 60 c for arrester option) (?10 to + 60 c for fluorinated oil fill transmitter) (?10 to + 85 c for silicone oil ?? ?? ?? (+ 20 to + 85 c for silicone oil ?? ?? for explosionproof units (flameproof or intrinsic safety), ambient temperature must be within the limits speci- fied in each standard. process: zero/span adjustment: zero and span are adjustable from the hhc (1) . zero and span are also adjustable externally from the adjustment screw (span odjustment is not available with 9th digit code ?, p, m, q , s, n?. damping: adjustable from hhc or local adjustment unit with lcd display. the time constant is adjustable between 0.12 to 32 seconds. zero elevation/suppression: ?00% to +100% of url normal/reverse action: selectable from hhc (1) indication: analog indicator or 5-digit lcd meter, as specified. burnout direction: selectable from hhc (1) if self-diagnostic detect transmitter fail- ure, the analog signal will be driven to ei- ther ?utput hold? ?utput overscale or ?utput underscale?modes. ?utput hold? output signal is hold as the value just be- fore failure happens. ?utput overscale? adjustable within the range 20.8ma to 21.6ma from hhc (1) lower limit of static press. process temperature atmospheric pressure fill fluid code in the 13th digit of ?ode symbols ?20 to 120 c ?15 to 250 c 85 to 300 c ?40 to 120 c ?15 to 250 c 85 to 300 c ?15 to 200 c w, a and d h j y and g s t k fluorinated oil silicone oil 2.7kpa abs {20mmhg abs} 0.13kpa abs {1mmhg abs} or more storage: ?40 to +90 c humidity limit: 0 to 100% rh communication: with hhc (1) (model fxw, consult data sheet no. eds8-47), following informa- tion can be remotely displayed or recon- figured. note: hhc? version must be more than 6.0 (or fxw 1 3), for fcx- a 2 . (note) (1) hhc: hand held communicator vv vv v vv v vv vv vv vv vv vv ? v v vv vv vv vv items display set tag no. model no. serial no. engineering unit range limit measuring range damping linear square root burnout direction calibration output adjust data self diagnoses printer external switch lock transmitter display linearize rerange output mode a tex ex ii 3 gd eex nl iic t5 tamb = 40 c to +40 c eex nl iic t4 tamb = 40 c to +80 c specific parameters: model without arrester: ui=42.4v, ii=113ma, pi=1w, ci=27nf, li=1.134mh model with arrester: ui=32v, ii=113ma, pi=1w, ci=34.2nf, li=1.134mh eex nal iic t5 tamb = 40 c to +40 c eex nal iic t4 tamb = 40 c to +80 c specific parameters: model without arrester: umax=42.4v, imax=113ma, pmax=1w model with arrester: umax=32v, imax=113ma, pmax=1w factory mutual class i ii iii div.2 groups a, b, c, d, f, g t4 entity type 4x csa class i div.2 groups a, b, c, d class ii div.2 groups e, f, g class iii div.2 temp code t4 tamb max = +40 c temp code t3c tamb max = +85 c entity parameters: vmax=28v, ci=27nf (without arrester), ci=34.2nf (with arrester), li=1.4mh tiis iecex scheme /saa authorities t ype n nonincendive model code 9th digit 13th digit a,b,c,d,j y,g,h,j,s,t,k 40 c to +85 c l,p,m,1,2,3 y,g,h,j,s,t,k 20 c to +80 c q ,s,n,4,5,6 y,g,h,j,s,t,k 20 c to +60 c e,f,g,h,k y,g,h,j,s,t,k 40 c to +60 c w,a,d ?0 c to +60 c t amb ?utput underscale? adjustable within the range 3.2ma to 3.8ma from hhc (1) 3.8 3.2 4 20 20.8 21.6 [ma] over scale burnout probable over range probable under range normal operating range under scale burnout
fkd ... 4 4 dielectric strength: 500v ac, 50/60hz 1 min., between circuit and earth. insulation resistance: more than 100m ? at 500v dc. turn-on time: 4 sec. internal resistance for external field indicator: 12 ? or less physical specifications electrical connections: g 1 /2 , 1 /2 -14 npt, pg13.5, or m20 1.5 con- duit, as specified. and 1-conduit or 2-conduit, as specified. process connections: jis, ansi, or din raised face flanges. jis: 10k80a, 10k100a, 30k80a, or 30k100a ansi: 150lb 3", 150lb 4", 300lb 3", or 300lb 4" din: pn40 dn80 or pn16 dn100 see outline diagram for detailed di- mensions. diaphragm extension: 0, 50, 100, 150, or 200mm as specified. (see model code. extended diaphragm is available only with 316l stainless steel or hastelloy-c diaphragm) process-wetted parts material: diaphragm: 316l stainless steel, hastelloy- c, monel, tantalum, titanium or zirconium flange face: 316 stainless steel, hastelloy- c lining monel lining, or tantalum lin- ing extension: 316 stainless steel or hastelloy- c non-wetted parts material: electronics housing: low copper die-cast aluminum alloy finished with epoxy/ polyurethane double coating (stan- dard), or 316 stainless steel (scs14 per jis g5121), as specified. capillary: in case of 11th code ?, e, f, l, m, n, p? pvc armored stainless steel. in case of 13th code q , r, s, t, v, w, x? stainless steel armored stainless steel. mounting flange: 304 stainless steel or carbon steel fill fluid: silicone oil (standard) or fluori- nated oil mounting bracket: 304 stainless steel environmental protection: iec ip67 and nema 6/6p mounting: on 60.5mm (jis 50a) pipe using mount- ing bracket, direct wall mounting mass {weight}: transmitter approximately 15kg without options. add; 0.5kg for mounting bracket 0.8kg for indicator option 4.5kg for stainless steel housing option 1.5kg per 50mm extension of diaphragm performance specifications reference conditions, silicone oil fill, 316ss isolating diaphragms, 4 to 20ma analog output in linear mode. accuracy rating: (including linearity, hysteresis, and re- peatability) (standard) for spans greater than 1 /10 of url: 0.2% of span for spans below 1 /10 of url: (option) (code; 21th digit h,k) for spans greater than 1 /10 of url: 0.1% of span for spans below 1 /10 of url: stability: 0.2% of upper range limit (url) for 3 years. temperature effect (*): effects per 28 c change between the lim- its of ?40 c and +85 c (standard) zero shift: 0.35% of url total effect: 0.5% of url (option) (code; 21th digit j,k) zero shift: 0.3% of url total effect: 0.4% of url note: * excluding effect by temperature difference between the seals. static pressure effect: zero shift; 0.2% of url for flange rating pressure span shift: 0.2% of calibrated span for flange rating pressure overrange effect: zero shift; 0.1% of url for flange rating pressure supply voltage effect: less than 0.005% fo calibrated span per 1v rfi effect: less than 0.2% of url for the frequen- cies of 20 to 1000mhz and field strength 30 v/m when electronics covers on. (classification: 2-abc: 0.2% span per sama pmc 33.1) update period: 120 msec * ) step response: (without electrical damping) 0.1+0.1 % of span 0.1 url span ( ) 0.05+0.05 % of span 0.1 url span ( ) range code ? ? ? time constant (*) 2s 1.7 s 1.7 s dead time (*) 0.2 s *) faster response is available as option (maximum update rate: 25 times per second). programmable output linearization function: output signal can be characterized with ?4 points linear approximation function from hhc (1) . emc conformity: en61326 (note) (1) hhc: hand held communicator
5 optional features indicator: a plug-in analog indicator (2.5% accuracy) can be housed in the electronics compart- ment or in the terminal box of the hous- ing. an optional 5-digit lcd meter with engi- neering unit is also available. local adjustment unit with lcd display: an optional 5-digit lcd meter with zero/ span adjustment function, loop-check function and damping adjustment func- tion, is available. arrester: a built-in arrester protects the electronics from lightning surges. lightning surge immunity: 4kv (1.2 50 s) oxygen service: special cleaning procedures are followed throughout the process to maintain all pro- cess wetted parts oil-free. the fill fluid is fluorinated oil. chlorine service: oil-free procedures as above. includes fluorinated oil for fill. degreasing: process-wetted parts are cleaned, but the fill fluid is standard silicone oil. not for use on oxygen or chlorine measurement. vacuum service: special silicone oil and filling procedure are applied. see fig. 1, fig. 2. optional tag plate: an extra stainless steel tag for customer tag data is wired to the transmitter. coating of cell: cell? surface is finished with epoxy/poly- urethane double coating. specify if envi- ronment is extremely corrosive. accessories hand-held communicator: (model fxw, refer to data sheet no. eds 8-47) z/s board: parts no.=zzpfcx4-a070 when z/s board is mounted on the fcx a 2 amplifier unit, external adjustment screw will be available for zero and span adjustment. fig. 2 relation between process temperature and operating pressure silicone (code y,g) silicone (code s) operating area silicone (code t) 101 {1010} 53.3 {533} 13.3 {133} 2.7 {27} [kpa abs] {mbar abs} operating pressure ?0 ?5 60 85 120 200 230 250 300 process temperature[ c ] sealing liquid:silicone (code k) operating area non-operating area 101 {1010} 0.27 {2.7} 0.13 {1.3} [kpa abs] {mbar abs} operating pressure 200 ?5 100 process temperature[ c ] fig. 1 relation between process temperature and operating pressure
fkd ... 4 6 code symbols g 1 /2 ( 1) 1 /2 -14npt ( 1) pg13.5 ( 1) m20 1.5 ( 1) g 1 /2 ( 2) 1 /2 -14npt ( 2) pg13.5 ( 2) m20 1.5 ( 2) mounting flange 304 stainless steel carbon steel 316 stainless steel none (wafer type) 0.32.... 32 {3.2..... 320} 1.3...... 130 {13...... 1300} 5......... 500 {50...... 5000} diaphragm 316l stainless steel hastelloy-c 316l stainless +au coating monel tantalum titanium zirconium description note note 2 note 3 note 1 digit 4 5 7 6 4567 123 f0 4 kd 89 10 11 12 13 14 15 21 digit no. of code a b c d s t v w 0 1 2 3 4 5 6 7 8 9 m r a b c d e f g h j k s t u v w x p q 3 5 6 v a b c d h f g k l j m t p r flange size and rating jis 10k 80a jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn16/40 dn80 din pn16 dn100 jis 20k 80a ansi/jpi 600lb 3b jis 10k 80a jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn16/40 dn80 din pn16 dn100 jis 10k 80a ansi/jpi 150lb 3b ansi/jpi 150lb 4b ansi/jpi 300lb 3b ansi/jpi 300lb 4b ansi/jpi 600lb 3b 3 inch wafer 4 inch wafer flange face 316 stainless steel hastelloy-c 316 stainless stell monel tantalum titanium zirconium diaph. extension [mm] 0 50 100 150 200 0 50 100 150 200 0 0 0 0 0 (*2) (*3) note 1: (*1) 100: 1 turn down is possible, but should be used at a span greater than 1 /40 of the maximum span for better performance. note 2: (*2) available for 13th digit code "s", "t", "k" and 5th digit code "1", "3", "5", "7", "b", "d", "f", "h", "k", " q ", "u", "w". note 3: (*3) available for 6th code "2", "3" and 5th code "0", "2", "4", "6", "8", "a", "c", "e", "g", "j", "p", "m", "r", "s", " t", "w". combination with 12th digit code "c, e, p, q " are not available.
7 none (for ordinary locations) tiis, flameproof (conduit seal) (available for 4th digit code "a", "s") tiis, flameproof (cable gland seal) (available for 4th digit code "a", "s") fm, flameproof (or explosionproof) (available for 4th digit code "b", "t") csa, flameproof (or explosionproof) (available for 4th digit code "b", "t") atex, flameproof iecex scheme/saa, flameproof (approval pending) tiis, intrinsic safety fm, intrinsic safety and nonincendive csa, intrinsic safety and nonincendive atex, intrinsic safety atex, type n iecex scheme/saa, intrinsic safety fm, combined of flameproof and intrinsic safety capillary mounting bracket armor of capilary 1.5 m 304 stainless steel pvc (*4) 3 304 stainless steel pvc (*4) 5 304 stainless steel pvc (*4) 6 304 stainless steel pvc (*4) 7 304 stainless steel pvc (*4) 8 304 stainless steel pvc (*4) 10 304 stainless steel pvc (*4) 1.5 304 stainless steel stainless steel (*5) 3 304 stainless steel stainless steel (*5) 5 304 stainless steel stainless steel (*5) 6 304 stainless steel stainless steel (*5) 7 304 stainless steel stainless steel (*4) 8 304 stainless steel stainless steel (*4) 10 304 stainless steel stainless steel (*4) extra ss tag plate stainless steel elec. housing coating of cell none none none yes none none none yes none yes yes none none none yes yes none yes none yes yes yes yes yes note 4: (*4) available for 13th digit code "y, w, g, a, d". inquire about in case of 13th other code. note 5: (*5) available for all 13th digit code. note 6: (*6) customer tag number can be engraved on standard stainless steel name plate. if extra tag plate is required, select "yes". description note note 4 note 4 note 4 note 4 note 4 note 4 note 4 note 5 note 5 note 5 note 5 note 4 note 4 note 4 note 6 digit 10 11 12 4567 123 f0 4 kd 89 10 11 12 13 14 15 21 digit no. of code a b c d e x r g h j k p t v y b c e m n p q d e l f m n p q r s t v w x (*6) indicator arrester none none analog, 0 to 100% linear scale none analog, 0 to 100% sq. root scale none analog, custom scale none analog, double scale (linear and sq. root) none none yes analog, 0 to 100% linear scale yes analog, 0 to 100% sq. root scale yes analog, custom scale yes analog, double scale (linear and sq. root) yes digital, 0 to 100% none digital, custom scale none digital, 0 to 100% square root none digital, 0 to 100% yes digital, custom scale yes digital, 0 to 100% square root yes digital, 0 to 100% (local adjustment unit with lcd display) none digital, custom scale (local adjustment unit with lcd display) none digital, 0 to 100% square root (local adjustment unit with lcd display) none digital, 0 to 100% (local adjustment unit with lcd display) yes digital, custom scale (local adjustment unit with lcd display) yes digital, 0 to 100% square root (local adjustment unit with lcd display) yes 9 a b c d j e f g h k l p m q s n 1 2 3 4 5 6 z/s board attached.
fkd ... 4 8 treatment fill fluid standard silicone oil standard fluorinated oil degreasing silicone oil oxygen service fluorinated oil (7th digit code "v", "a", "b", "c", "d"and "j") chlorine service fluorinated oil (7th digit code "h", "f", "g", "k", "l"and"t") high temp. 250 c silicone oil 7 th digit code "v", "a", "b", "c", "d", "h", "f", "g", "k" and "l" high temp. 300 c silicone oil high temp. and vacuum (250 c) silicone oil high temp. and vacuum (300 c) silicone oil high temp. and high vacuum silicone oil none yes (available for 5th digit code "0", "2", "4", "6", "8", "a", "c", "e", "g", "j", "p", "m", "r", "s", "t", "u", "x" and 7th digit code "v", "h", "m", "t", "p", "r". not available for the 13th digit code "h", "j", "s", "t", "k".) (*8) high accuracy type instruction manual attached low temperature effect type instruction manual attached h+j instruction manual attached instruction manual unattached high accuracy type instruction manual unattached low temperature effect type instruction manual unattached t+u instruction manual unattached note 7: (*7) treatment; standard note 8: (*8) if other option is not necessary, 21st digit code is blank. in case of 21st digit code is blank, instruction manual attached. description note note 7 note 8 digit 13 14 21 4567 123 f0 4 kd 89 10 11 12 13 14 15 21 digit no. of code y w g a d h j s t k y c 7th digit code "v", "a", "b", "c", and "d" (*7) h j k l t u v
9 the product conforms to the requirements of the electromagnetic compatibility directive 94/9/ec as detailed within the technical construction file number tn513035. the applicable standards used to demonstrate compliance are : frequency range mhz limits reference standard 30 to 230 40db ( v/m) quasi peak, measured at 10m distance 230 to 1000 47db ( v/m) quasi peak, measured at 10m distance cispr16-1 and cispr16-2 phenomenon test value basic standard performance criteria b electrostatic discharge conducted rf 0.15 to 80mhz 3v 80%am (1khz) electromagnetic field 4kv (contact) 8kv (air) 80 to 1000mhz 10v/m 80%am (1khz) en61000-4-2 burst a en61000-4-3 rated power frequency magnetic field 30a/m 50hz a en61000-4-8 2kv 5khz b en61000-4-4 surge 1.2 s/50 s 1kv (line to line) 2kv (line to ground) b en61000-4-5 a en61000-4-6 emi (emission) en61326 : 1997 class a (standard for industrial location) emi (immunity) en61326: 1997 annex a (standard for industrial location) note) definition of performance criteria a: during testing, normal performance within the specification limits. b: during testing, temporary degradation, or loss of function or performance which is self-recovering. ordering information when ordering this instrument, specify: 1. code symbols 2. measuring range 3. output orientation (burnout direction) when abnormality is occurred in the transmitter. hold / overscale (21.6ma) / underscale (3.2ma) unless otherwise specified, output hold function is sup- plied. 4. output mode (linear or square root output) unless otherwise specified, output mode is linear. 5. indication method (indicated value and unit) in case of the actual scale (code d, h, p, s on 9th digit). 6. tag no. (up to 26 alphanumerical characters), if required.
fkd ... 4 10 outline diagram (unit:mm) v, j, h, m, t, p, r a,f b,g c,k d,l 0 50 100 150 200 14 ? 19.5 15 ? 30.5 15.5 ? 31 16 ? 31.5 16.5 ? 32 l mass.approx. (kg) 7th digit code 11th digit code d, q e, r l, s f, t s (m) 1.5 3 5 6 (m) s m, v n, w p, x 7 8 10 11th digit code note) cable gland is supplied in case of flameproof packing type. 11 cable is suitable. ? 5th digit of the code symbols 185 0, a, s ? 150 ? 126 ? 100 ? 73 t 38 p 116 n-? 8-19 (flange) jis-10k-80a 200 m 160 126 100 73 42 116 8-23 jis-20k-80a 210 2, c 170 126 100 73 48 116 8-23 jis-30k-80a 210 1, b 175 151 103 96 38 141 8-19 jis-10k-100a 240 3, d 195 151 103 96 52 141 8-25 jis-30k-100a 191 4, e, t 152.5 126 100 73 44 116 4-20 ansi 150lb 3b 210 6, g, v 168 126 100 73 49 116 8-23 ansi 300lb 3b 210 r, x 168 126 100 73 52 116 8-23 ansi 600lb 3b 229 5, f, u 190.5 151 103 96 44 141 8-20 ansi 150lb 4b 254 7, h, w 200 151 103 96 52 141 8-23 ansi 300lb 4b 200 8, j 160 126 100 73 44 116 8-18 din pn40 dn80 220 9, k 180 151 103 96 40 141 8-18 din pn16 dn100 table 1 4th digit code jkm g1/2 17 8 a, s 1/2-14npt 16 5 b, t pg13.5 84.5 c, v m20 1.5 16 5 d, w conduit conn. ck ck ?3 g1/2 17 detail "b" connection diagram j k m ?5 see table 1 detail "a" (conduit donn.) p ?0 270 48 43 earth tarminal 120 70 n holes h dia. 222 s s h.p. l.p. cable gland (option) note) "b" conduit conn. ? ? l 20 t ? ?0 52.5 88 zero adj. screw 38 28 58 201 (27) mtg. pipe jis 50a (2b) 70 4 holes 9 dia. with field ind. ? inner of gasket no flange is attached in case of 5th digit code "p,q". 54 104 105 8 "a" conduit conn. fastener (flamproof only) ? in case of 4th digit code "t" up 105 10 in case of 4th digit code "s.v.w.x" down 94.5 in case of 4th digit code "a.b.c.d.e" u-bolt m8 2-m8 12 electronics unit sensor unit
11
fkd ... 4 information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.

▲Up To Search▲

Price & Availability of EDSX6-117I

	To Download EDSX6-117I Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .