modifications in the sense of technical progress are reserved designed by: e.bunke approved by: r.rippl date : 2003-05-22 page 1 of 1 [vrrp-02.doc] revision / rev. no.: 00 revised by: approved by: date : reed relay: HM12-1A83-03 headquarter europe meder electronic ag friedrich-list strasse 6 d-78234 engen-welschingen tel.: +49(0)7733-9487-0 fax: +49(0)7733-9487-32 email: info@meder.com internet: www.m eder.com headquarter usa meder electronic inc. 766 falmouth rd mashpee, ma 02649 phone: +1/ 508-539-0002 fax: +1/ 508-539-4088 email: salesusa@meder.com part number: 8412183003 dimensions (mm) layout / pitch 2,5 mm / top view marking meder-label type layout production- code- en60062 /factory code pins: ? 0,8 mm / l 3,2 0,3 mm coil/relay characteristics conditions at 20c min. typ. max. units coil resistance 225 250 275 ? nominal voltage 12 vdc nominal rated power 576 mw thermal resistance 24 k / w operate voltage 9 vdc release voltage 2 vdc contact data 83 (form a/ dry ) contact rating any combination of the switching voltage and current must not exceed the given rated power 50 w switching voltage dc or peak ac 7500 v switching current dc or peak ac 3 a carry current dc or peak ac 5 a static contact resistance (initial) measured with nominal voltage 150 m ? insulation resistance rh 45% 10 10 ? breakdown voltage 10.000 vdc operate time, including bounce measured with nominal voltage 3,0 ms release time measured with no coil suppression 1,5 ms capacitance 0,6 pf environmental data insulation resistance coil to contact rh 45% 10 12 ? dielectric strength coil to contact 10 kv dc shock ? sine wave, duration 11ms 50 g vibration at 800 hz 20 g operating temperature 10c/min max. allowable -20 70 c storage temperature 10c/min max. allowable -35 105 c soldering temperature 5 sec. at 260 c cleaning fully sealed material of case plastics / polycarbonat sealing compound polyurethan material of pins cu-alloy tinned remarks high voltage reed relay for pcb mounting. ( 03 = pin out index ) customer / customer part number standard part
|