lC1 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock yf series 4 tumbler miniature switchlocks models a vailable features/benefits ? multi-pole and multi-position ? positive detent ? low level and power capability typical applications ? computer servers ? point-of-sale terminals ? cash registers specifications contact rating: q contact material: 4 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac (ul/csa). see page m-14 for additional ratings. electrical life: 10,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. indexing: 45o3 positions max., 90?o positions max. materials lock: zinc alloy with stainless steel facing. 4 tumbler, single bitted lock with integral detent mechanism. keys: two nickel plated brass keys with code number. switch housing: 6/6 nylon (ul 94v-2). contacts & terminals: q contact material: copper, silver plated. see page l-14 for additional contact materials. mounting nut: brass, bright zinc plated. terminal seal: epoxy . note: any models supplied with q or b contact material ar e rohs compliant. note: specifications and materials listed above ar e for switchlocks with standar d options. for information on specific and custom switchlocks, consult customer service center . build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages lC2 through lC4. for additional options not shown in catalog, consult customer service center. switch and lock function yf0113 sp, 900 index, keypull pos. 1 yf2113 dp , 90 index, keypull pos. 1 yf011u sp, 90 index, keypull pos. 1 & 2 yf211u dp, 90 index, keypull pos. 1 & 2 mounting style n with nut keying 2 t wo nickel pla ted brass keys lock finish 2 stainless steel facing 8 gloss black facing t erminations 03 solder lug with hole wc wire lead contact material q silver b gold lock type c 4 t umbler, single bitted lock with detent
lC 12 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock keying 0029 .772 (19,6) .174 (4,19) 1.435 (36,44) .548 (13,91) 2 pos. 1 terminal nu mbers molded on housing 0029 = detent positions (45 o or 90 o ) = k e y pull p ossi bl e in t h ese p ositions. = s to p po sitions legend t erminal nu mbers molded on bottom of housing. terminal numbers part number shown: yf01132c203nq note: all or ders keyed alike with code number on key . for more than one key code, replacement keys, or other special features, consult customer service center. 2 two nickel plated brass keys pos. 1 2 all models with all options when ordered with ?ontact material. c&k yf series 4 tumbler miniature switchlocks switch and lock function po s itio n s 1 & 2 1-3 1-3, 5- 7 8-1 8-1, 4- 5 yf 0 11u yf 2 11u sp dp po s it i on 1 1-3 1-3, 5- 7 8-1 8-1, 4- 5 yf 0 01 3 yf 2 113 sp dp in d ex i ng lo c k co n fi g ura ti o n key pu l l pos i ti on s co n nected te r min als pos. 1 pos. 2 pos. 3 model no . no . poles single & do ub le po l e sw i tc h es 90o key part number: 119091029
lC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock c&k yf series 4 tumbler miniature switchlocks lock type lock finish termina tions wc wire lead 8 gloss black facing 2 stainless steel facing c 4 tumbler, single bitted lock with detent 03 solder lug with hole black wir e standard, other colors and lengths available, consult customer service center . ul style 1015.
lC 14 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock yf series 4 tumbler miniature switchlocks contact material available hardware key sh own in position one lock must be in panel before att ach ing switch base switch base align tab with slot and snap together 4 tumbler lock p anel mounting .420 (10,67) .472 dia. (11,99) pan el thickness: .300 (7,62) max. mounting style key code: 0029 part no. (one key) 960b10029 material: brass finish: nickel plate n with nut switch and lock assembly instructions note: switch installation is permanent. switch cannot be removed from lock after assembly. attempts to separate switch and lock may damage switch. 1 cont acts & terminals: copper , with gold plate over nickel plate. 2 cont acts & terminals: copper, silver plated (standard with all termination options). * note: see t echnical data section of this catalog for rohs compliant and compatible definitions and specifications. all models with all options when or der ed with ?ontact material. nut part number: 179090123 co n t ac t an d option co d e te rmin al mater ial ra ti n g q 4 a m ps @ 1 25 v a c o r 28 v d c; 2 a m ps @ 2 50 v a c (ul/csa ) . low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x. rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s g old 1
|
