gamewell-fci 12 clintonville road, northford, ct 06472-1653 us a ? tel: (203) 484-7161 ? fax: (203) 484-7118 specifications are for information only, are not intended for in stallation purposes, and are subj ect to change wi thout notice. no responsibility is assumed by gamewell-fci for their use. ?2008 honeywell international inc. all rights reserved. www.gamewell-fci.com 9020-0625 rev. d1 page 1 of 1 velociti ? series AOM-2RF addressable output relay control module description the gamewell-fci velociti ? series, addressable output relay control module (AOM-2RF) allows an gamewell-fci analog addressable fire alarm control to switch discrete relay contacts by code command. the relay provides two (2), isolated sets of form-c contacts which transfer simul- taneously. circuit connections to the relay contacts are not supervised by the module. the velociti ? series use a communication protocol that substantially increases the speed of communication between the sensors and certain gamewell-fci analog addressable fire alarm controls. these devices operate in a grouped fashion. if one of the devices in the group has a status change, the panel?s mi croprocessor stops the group poll and concentrates on the si ngle device. the net effect is response speed up to five times greater than earlier designs. the AOM-2RF module is designed for installation in the signaling line circuit of any gamewell-fci analog address- able fire control panel. the module contains a panel con- trolled led. the AOM-2RF is designed to mount in a 4? square junction box 2 1/8? deep. velociti ? series is a registered trademar k of honeywell international inc. relay contact ratings c u r r e n t rating maximum voltage load description application 3a 30 vdc resistive non-coded 2a 30 vdc resistive coded 0.9a 110 vdc resistive non-coded 0.5a 125 vac resistive non-coded 0.5a 30 vdc inductive (l/r=5ms) coded 1a 30 vdc inductive (l/r=2ms) coded 0.5a 125 vac inductive (pf=.35) non-coded 0.7a 75 vac inductive non-coded features ? two (2) sets of form ?c? contacts ? visual rotary, decimal switch addressing (01-159) ? bicolor leds flash green whenever the sensor is addressed, and light steady red on alarm* ? compact size allows easy installation note: only the red led is operative in panels that do not operate in velociti ? mode. specifications supervisory current: .000375 amps. alarm current: .0065 amps. operating temperature: 32 to 120 f (0 to 49 c) relative humidity: 10 to 93% relative humidity (non-condensing) dimensions: 4 1/2? h x 4? w x 1 1/4? (11.4 x 10.2 x 3.2 cm) ordering information model description AOM-2RF addressable output relay control module AOM-2RF an iso 9001-2000 com pany a pproved fm 3023594 signaling 07300-0694:178 s1949 mea approved 227-03-e vol.iv
|
