tlp627a,TLP627A-2,tlp627a-4 2007-10-01 1 toshiba photocoupler gaas i red & photo-transistor tlp627a,TLP627A-2,tlp627a-4 telecommunication programmable controllers dc-output module the toshiba tlp627a, -2, and -4 consist of a gallium arsenide infrared emitting diode optically coupled to a darlington connected phototransistor which has a 350v high voltage of collector-emitter breakdown voltage. the TLP627A-2 offer two isolated channels in a eight lead plastic dip package, while the tlp627a-4 provid e four isolated channels per package. z collector-emitter voltage : 350v(min) z current transfer ratio : 1500% (min) z isolation voltage : 5000vrms(min) pin configuration (top view) tlp627a TLP627A-2 tlp627a-4 toshiba 11 ? 5b2 weight : 0.26 g toshiba 11 ? 10c4 weight : 0.54 g toshiba 11 ? 20a3 weight : 1.1 g g: mm 1 : anode 2 : cathode 3 : emitter 4 : collector 1, 3 : anode 2, 4 : cathode 5, 7 : emitter 6, 8 : collector 1, 3, 5, 7 : anode 2, 4, 6, 8 : cathode 9, 11, 13, 15 : emitter 10, 12, 14, 16 : collector
tlp627a,TLP627A-2,tlp627a-4 2007-10-01 2 absolute maximum ratings (ta = 25c) rating characteristics symbol tlp627a tlp627a ? 2 tlp627a ? 4 unit forward current i f 60 50 ma forward current derating i f / ? 0.7 (taR 39 ) ? 0.5 (taR 25 )ma / pulse forward current i fp 1 (100 s pulse 100 pps) a led reverse voltage v r 5 v collector-emitter voltage v ceo 350 v emitter-collector voltage v eco 0.3 v collector current i c 150 ma collector power dissipation (1 circuit) p c 150 (300) (* ) 100 mw detector collector power dissipation derating (ta R 25, 1 circuit) p c / ? 1.5 ( ? 3.5) (* ) ? 1.0 ma / storage temperature range t stg ? 55 125 operating temperature range t opr ? 55 100 lead soldering temperature t sol 260 (10 sec) total package power dissipation (1 circuit) p t 250 (320) (* ) 150 mw total package power dissipation derating (ta R 25 , 1 circuit) p t / ? 2.5 ( ? 3.2) (* ) ? 1.5 mw / isolation voltage bv s 5000 (ac 1 min r.h. Q 60%) (** ) vrms note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). * : if = 20 ma max ** : device considered a two terminal device : led side pins shorted together and detector side pins shorted together. recommended operating conditions characteristics symbol min. typ. max. unit supply voltage v cc D D 200 v forward current i f D 16 25 ma collector current i c D D 120 ma operating temperature t opr ? 25 D 85 note: recommended operating conditions are given as a design guideline to obtain expected performance of the device. additionally, each item is an independent guide line respectively. in developing designs using this product, please confirm specified characteristics shown in this document. individual electrical characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit forward voltage v f i f = 10 ma 1.0 1.15 1.3 v reverse current i r v r = 5 v D D 10 a led capacitance c t v = 0, f = 1 mhz D 30 D pf collector-emitter breakdown voltage v (br) ceo i c = 0.1 ma 350 D D v emitter-collector breakdown voltage v (br) eco i e = 0.1 ma 0.3 D D v v ce = 300 v D 10 200 na collector dark current i ceo v ce = 300 v, ta = 85 D D 20 a detector capacitance collector to emitter c ce v = 0, f = 1 mhz D 10 D pf
tlp627a,TLP627A-2,tlp627a-4 2007-10-01 3 coupled electrical characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit current transfer ratio i c / if i f = 1 ma, v ce = 1 v 1500 4000 D % saturated ctr i c / i f (sat) i f = 10 ma, v ce = 1 v 500 D D % i c = 15 ma, i f = 1 ma D D 1.0 collector-emitter saturation voltage v ce (sat) i c = 100 ma, i f = 10 ma 0.3 D 1.2 v isolation characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit capacitance input to output c s v s = 0, f = 1 mhz D 0.8 D pf isolation resistance r s v s = 500 v, r.h. Q 60% 510 12 10 14 D ac 1 minite 5000 D D ac 1 second in oil D 10000 D vrms isolation voltage bv s dc 1 second in oil D 10000 D vdc switching characteristics (ta = 25c) characteristics symbol test condition min. typ. max. unit rise time t r D 40 D fall time t f D 15 D turn-on time t on D 50 D turn-off time t off v cc = 10 v i c = 10 ma r l = 100 D 15 D s turn-on time t on D 5 D strage time t s D 40 D turn-off time t off r l = 180 (fig.1) v cc = 10 v, i f = 16 ma D 80 D s fig.1: switching time test circuit
tlp627a,TLP627A-2,tlp627a-4 2007-10-01 4 restrictions on product use 20070701-en ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patents or other rights of toshiba or the third parties. ? gaas(gallium arsenide) is used in this product. the dus t or vapor is harmful to the human body. do not break, cut, crush or dissolve chemically. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
|
