d a t a sh eet product speci?cation supersedes data of 6th december 1999 file under discrete ceramics, acm2 2000 may 24 discrete ceramics class 2, y5v 16 v, 25 v and 50 v surface mount ceramic multilayer capacitors
2000 may 24 2 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v features five standard sizes high capacitance per unit volume supplied in tape on reel nickel-barrier end terminations. applications consumer electronics, for example: tuners television receivers video recorders all types of cameras mobile telephones. description the capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. this structure gives rise to a high capacitance per unit volume. the inner electrodes are connected to the two terminations and finally covered with a layer of plated tin (nisn). a cross section of the structure is shown in fig.1. quick reference data note 1. measured at 25 c, 1 v and 1 khz, using a four-gauge method. description value rated voltage u r (dc) 16 v, 25 v, 50 v capacitance range (e6 series) 1 nf to 4.7 m f; note 1 tolerance on capacitance after 1000 hours 20% (m); - 20% to +80% (z) test voltage (dc) for 1 minute 2.5 u r sectional speci?cations iec 60384-10, second edition 1989-04; also based on cecc 32 100 detailed speci?cation based on cecc 32 101-801 end terminations nisn climatic category (iec 60068) 25/85/21 fig.1 construction of a ceramic multilayer capacitor. mlb457 terminations electrodes ceramic material
2000 may 24 3 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v mechanical data physical dimensions table 1 capacitor dimensions case size l 1 w tl 2 and l 3 l 4 min. min. max. min. max. dimensions in millimetres 0201 0.6 0.03 0.3 0.03 0.027 0.033 0.10 0.20 0.20 0402 1.0 0.05 0.50 0.05 0.45 0.55 0.15 0.30 0.40 0603 1.6 0.10 0.8 0.07 0.73 0.87 0.25 0.65 0.40 0805 2.0 0.10 1.25 0.10 0.50 1.35 0.25 0.75 0.55 1206 3.2 0.15 1.6 0.15 0.50 1.75 0.25 0.75 1.40 dimensions in inches 0201 0.024 0.001 0.012 0.001 0.011 0.013 0.004 0.008 0.008 0402 0.040 0.002 0.020 0.002 0.018 0.022 0.008 0.012 0.016 0603 0.063 0.004 0.032 0.003 0.029 0.035 0.010 0.026 0.016 0805 0.079 0.004 0.049 0.004 0.020 0.053 0.010 0.030 0.022 1206 0.126 0.006 0.063 0.006 0.020 0.069 0.010 0.030 0.056 fig.2 component outline. mbb211 t l 4 l 1 l 2 l 3 w for dimensions see table 1.
2000 may 24 4 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v selection chart for 16 v and 25 v selection chart for 50 v c (nf) last two digits of 12nc 16 v 25 v 0201 0402 0603 0805 1206 0603 0805 1206 123 1.5 25 2.2 27 3.3 29 0.3 0.03 4.7 32 6.8 34 10 36 15 38 22 41 33 43 0.5 0.05 0.8 0.07 47 45 68 47 100 49 0.6 0.1 150 52 values in shaded cells indicate thickness classi?cation. 0.85 0.1 0.6 0.1 220 54 0.8 0.07 330 56 1.25 0.1 470 58 0.85 0.1 0.85 0.1 680 61 1000 63 0.85 0.1 1.15 0.1 1500 65 1.25 0.1 2200 67 2700 68 3300 69 1.15 0.1 3900 71 4700 72 c (nf) last two digits of 12nc 50 v 0603 0805 1206 10 05 15 06 22 07 33 08 0.8 0.07 0.6 0.1 47 09 68 11 100 12 150 13 0.85 0.1 0.6 0.1 220 14 330 15 1.25 0.1 470 16 0.85 0.1 680 17 values in shaded cells indicate thickness classi?cation. 1000 18 1.15 0.1
2000 may 24 5 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v thickness classi?cation and packaging quantities ordering information components may be ordered by using either a simple 15-digit clear text code or philips unique 12nc. clear text code example: 12062f105m8bb0d thickness classification (mm) 8 mm tape width amount per reel amount per bulk case ? 180 mm; 7" ? 330 mm; 13" 0201 0402 0603 0805 paper blister paper blister 0.3 0.03 10000 - 50000 - 50000 --- 0.5 0.05 10000 - 50000 -- 50000 - 10000 0.6 0.1 4000 - 10000 - --- 10000 0.85 0.1 4000 - 10000 - --- 8000 0.8 0.07 4000 4000 15000 15000 -- 15000 - 1.25 0.1 - 3000 - 10000 --- 5000 1.15 0.1 - 3000 - 10000 ---- size code temp. char. capacitance tol. voltage termination packaging marking series 0201 0402 0603 0805 1206 2f = y5v 105 = 1000000 pf; the third digit signi?es the multiplying factor: 2= 100 3= 1000 4= 10000 5= 100000 m= 20% z= - 20%/+80% 7 = 16 v 8 = 25 v 9 = 50 v b = nisn 2 = 180 mm; 7" paper 3 = 330 mm; 13" paper b = 180 mm; 7" blister f = 330 mm; 13" blister p = bulk case 0 = no marking 2 = 2-character marking in north america only d = bme ordering code 12nc (1) refer to chapters selection chart for 16 v and 25 v and selection chart for 50 v. (2) amount on reel depends on thickness classification, see section thickness classification and packaging quantities. handbook, full pagewidth 2 2 x x x x x x 9 x x x carrier type 22 38 54 blister paper bulk rated voltage - termination 78 91 58 16 v; nisn 25 v; nisn 50 v; nisn size 8 7 6 0 1 0201 0402 0603 0805 1206 capacitance value (1) tolerance 7 8 20% - 20/ + 80% packaging (2) 1 5 4 reel: ? 180 mm; 7" reel: ? 330 mm; 13" bulk case cca620
2000 may 24 6 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v electrical characteristics class 2 capacitors; y5v base metal electrode dielectric; nisn terminations unless otherwise stated all electrical values apply at an ambient temperature of 25 1 c, an atmospheric pressure of 86 to 105 kpa, and a relative humidity of 63 to 67%. note 1. measured at 25 c, 1 v and 1 khz, using a four-gauge method. description value capacitance range (e6 series); note 1 1 nf to 4.7 m f tolerance on capacitance after 1000 hours 20% (m); - 20% to +80% (z) ta n d ; note 1: all 25 v and 50 v (except 1206 and 1 m f; 0603 and 100 nf; 0805 and 330 nf) 5% sizes 1206 and 1 m f; 0603 and 100 nf; 0805 and 330 nf 7% all 16 v (except 0402; 0603 and 330 nf, 470 nf; 0805 and 2.2 m f; 1206 and 3.3 m f, 4.7 m f) 9% sizes 0201; 0402; 0603 and 330 nf, 470 nf; 0805 and 2.2 m f; 1206 and 3.3 m f, 4.7 m f 12.5% insulation resistance after 1 minute at u r (dc) i r c > 500 seconds maximum capacitance change with respect to capacitance at 25 c (for typical values see fig.5) +22% to - 82% ageing typical 7% per time decade resistance to soldering heat 260 c; 10 seconds
2000 may 24 7 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v fig.3 typical capacitance change with respect to the capacitance at 1 v as a function of dc voltage at 25 c. 050 0 100 80 mbd076 60 40 20 10 20 30 40 d c (%) v (v) dc c fig.4 typical tan d as a function of temperature. 25 100 0 500 mbd078 1000 1500 2000 0 255075 t ( c) o tan d (x 10 ) 4 fig.5 typical capacitance change as a function of temperature. 25 100 25 100 75 mbd077 50 25 0 0 255075 d t ( c) o c (%) c
2000 may 24 8 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v tests and requirements table 2 test procedures and requirements iec 60384-10/ cecc 32 100 clause iec 60068-2 test method test procedure requirements 4.4 mounting the capacitors may be mounted on printed-circuit boards or ceramic substrates by applying wave soldering, re?ow soldering (including vapour phase soldering) or conductive adhesive no visible damage 4.5 visual inspection and dimension check any applicable method using 10 magni?cation in accordance with speci?cation 4.6.1 capacitance f = 1 khz; measuring voltage 1v rms at 25 c within speci?ed tolerance 4.6.2 tan d f = 1 khz; measuring voltage 1v rms at 25 c in accordance with speci?cation 4.6.3 insulation resistance at u r (dc) for 1 minute r i c r 3 500 s 4.6.4 voltage proof 2.5 u r for 1 minutes no breakdown or ?ashover 4.7.1 temperature characteristic between minimum and maximum temperature in accordance with speci?cation 4.8 adhesion a force of 5 n applied for 10 s to the line joining the terminations and in a plane parallel to the substrate no visible damage 4.9 bond strength of plating on end face mounted in accordance with cecc 32 100, paragraph 4.4 no visible damage conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm d c/c: 30% 4.10 tb resistance to soldering heat preconditioning: 120 to 150 c during 1 minute; 260 5 cfor 10 0.5 s in a static solder bath the terminations shall be well tinned after recovery d c/c: 20% tan d : original speci?cation r ins : original speci?cation resistance to leaching 260 5 c for 30 1s in a static solder bath using visual enlargement of 10, dissolution of the terminations shall not exceed 10% 4.11 ta solderability zero hour test, and test after storage (20 to 24 months) in original packing in normal atmosphere; unmounted chips completely immersed for 2 0.5 s in a solder bath at 235 5 c the terminations shall be well tinned
2000 may 24 9 philips components product speci?cation surface mount ceramic multilayer capacitors class 2, y5v 16 v, 25 v and 50 v 4.12 na rapid change of temperature preconditioning: between minimum and maximum temperature, 5 cycles no visual damage after 48 hours recovery: d c/c: 20% 4.14 ca damp heat, steady state initialization: 48 4 hours after u r at 40 c for 1 hour (for initial value measurement); 500 12 hours at 40 c; 90 to 95% rh; u r applied no visual damage after 48 hours recovery: d c/c: +30%/ - 40% tan d : 15% r ins : 500 m w or r i c r 3 100 s, whichever is less damp heat, with u r load initialization: 48 hours after u r at 40 c for 1 hour (for initial value measurement); 500 12 hours at 40 c; 90 to 95% rh; u r applied preconditioning: u r at 40 c for 1 hour after 48 hours recovery: d c/c: + 30%/ - 40% tan d : 15% r ins : 500 m w or r i c r 3 25 s, whichever is less 4.15 endurance initialization: 2 u r at 85 c for 1 hour (initial value is measured after 48 4 hours); 2 u r at 85 c for 1000 hours, recovery 48 4 hours at room temperature after 48 hours recovery: d c/c: + 30%/ - 40% tan d : 15% r ins : 1000 m w or r i c r 3 50 s, whichever is less iec 60384-10/ cecc 32 100 clause iec 60068-2 test method test procedure requirements
|
