3-42 tubing r users should independently evaluate the suitability of the product for their application. f ax-on-demand: (800) 260-9099 (650) 361-6523 bef ore or dering c hec k with factor y f or most current data. sst and ast self-sealing heat-shrinkable tubing applications sst and ast pro vide a simple , positiv e splice-sealing method that off ers protection under adv erse en vironmental conditions . t ubing supplied with standard sealant pro vides w ater sealing and en vironmental protection in w et or underg round applica- tions . the ther moplastic adhesiv e not only seals , b ut also pro- vides mechanical str ain relief . the polymer tubing has e xcellent insulating, abr asion-resisting, and str ain-relief proper ties . features/benefits strain relief. waterproofing. thick-wall insulation and abrasion-protection. no need for greases, tape, or epoxy. expansion ratios as high as 3:1. availability in flame-retardant material. ast-fr has the following agency approvals: ?bs (american bureau of shipping) ?nv (det norske veritas) ?loyd? (lloyd? register of shipping) installation minim um shr ink temper ature: 90? minim um full reco v er y temper ature: 121? speci cations/approvals series ul csa militar y industr y ra yc hem sst nemosyne 90 sst -fr mil-dtl-23053/15a*, class 1 and class 2 astm d 685, nonb ur ning nemosyne fr astm d 2863, o xygen inde x ipcea s-19-81, cab le insulation and jac k ets ieee-383 section 2.5 massiv e ame v er tical tr a y ast -fr abs , dnv , llo yd s register r w 2017 ast r w 2011 *f or mer ly mil-i-23053/i5a. product dimensions (inches) mil-spec appr o ved par t n umber ? ag enc y appr o ved par t n umber standar d nominal length internal diameter w all thic kness (nominal) minim um e xpanded maxim um reco vered expanded reco vered ?? recommended cab le rang e f or 600-v olt cab le sst*-03 ast 8/3 6 0.300 .100 .025 .060 #18 through #14 a wg sst*-04 ast 10/4 6 0.400 .150 .025 .060 #14 through #10 a wg sst*-07m ast 19/6(m) 6, 9, 12 0.750 .220 .020 .060 #8 through #1 a wg sst*-07 ast 19/6 6, 9, 12 0.750 .220 .030 .095 #8 through #1 a wg sst*-11m 6, 9, 12 1.100 .375 .030 .105 #2 through #4/0 a wg sst*-11 6, 9, 12 1.100 .375 .040 .120 #2 through #4/0 a wg sst*-13m ast 33/10(m) 6, 9, 12 1.300 .375 .025 .105 #2 through #4/0 a wg sst*-13 ast 33/10 6, 9, 12 1.300 .375 .035 .120 #2 through #4/0 a wg sst*-15m 6, 9, 12 1.500 .500 .035 .120 #2/0 a wg through 500 mcm sst*-15 6, 9, 12 1.500 .500 .050 .140 #2/0 a wg through 500 mcm sst*-17m ast 43/13(m) 6, 9, 12 1.700 .500 .030 .120 #2/0 a wg through 500 mcm sst*-17 ast 43/13 6, 9, 12 1.700 .500 .045 .140 #2/0 a wg through 500 mcm sst*-20m ast 51/19(m) 6, 9, 12 2.000 .750 .040 .120 #350 mcm through 1000 mcm sst*-20 ast 51/19 6, 9, 12 2.000 .750 .050 .155 #350 mcm through 1000 mcm sst*-27 ast 69/23 12, 18, 24 2.700 .900 .050 .155 #500 mcm through 1250 mcm sst*-30 ast 76/32 12, 18, 24 3.000 1.250 .050 .155 #900 mcm through 1500 mcm sst*-40 12, 18, 24 4.000 1.750 .050 .155 #1500 mcm through 2500 mcm sst*-45 ast 114/45 12, 18, 24 4.500 1.750 .050 .155 #1500 mcm through 2500 mcm ? in place of aster isk* substitute length of tubing to be ordered. f or e xample , sst*-11, as the third column indicates , comes in 6-, 9-, and 12-inch lengths , so 9-inch sst tubing w ould be sst 9-11. the suf x m = medium-w all tubing. ?? w all thic kness will be less if tubing reco v er y is restr icted dur ing shr inkage . a f ax id description 2290 data sheet
users should independently evaluate the suitability of the product for their application. r tubing 3-43 ordering information color standard blac k (-0) siz e selection alw a ys order the largest siz e that will shr ink sn ugly o v er the component to be co v ered. special order siz es are a v ailab le upon request. standard pac kaging see product dimensions tab le . order ing descr iption specify product name , siz e , and color (f or e xample , srfr 10/6-8 ). adhesiv e sealant standard all lengths supplied with contin uous coating. nonstandard lengths can be ordered with coating on ends only . part numbering system mil-spec approved part numbers *flame-retardant tubing will be supplied with ther moplastic adhesiv e unless speci ed diff erently upon order . standar d thic k-wall, standar d sealant, non-f lame-retar dant: no suff ix ad ded. (does not meet mil-spec.) siz e (e xpanded i.d . in inches and/or tenths of an inch) standar d thic k-wall, thermoplastic adhesive , non-f lame-retar dant: ad d suff ix /97. (does not meet mil-spec.) sst 6-11 /97 ther moplastic adhesiv e flame-retar dant* thic k-wall with thermoplastic adhesive: ad d suff ix fr. sst 6-11 fr flame-retardant mater ial (not a v ailab le in clear) sst 6-11 length in inches ast 33/10 (m) 030 /97 -0 color 0 = blac k (standard color) other colors a v ailab le on special order : 2 = red 9 = white x = clear* *ast -fr is not a v ailab le in clear . standar d length options 015 = 150 mm (6 inches) 030 = 300 mm (12 inches) 045 = 450 mm (18 inches) 060 = 600 mm (24 inches) medium-wall tubing (option) siz e (nominal e xpanded and reco v ered inter nal diameter) pr oduct description ast = adhesiv e sealing tubing ast -fr = adhesiv e sealing tubing, ame-retardant precoat adhesive/sealant options /97 = hot-melt adhesiv e (standard) /226 = mastic sealant a g enc y appr o ved p ar t number s
|
