16 axk(5/6)f socket and header are mated socket header features 1. ultra low pro?e of 1.5mm the connector is a two-piece structure and 0.5mm pitch. the product lineup consists of the stack- ing height of 1.5mm, 2.0mm and 2.5mm. they allow products to be slimmer. 2. the socket and header has the same dropping shock and torsion resistant construction as the bellows-type contact. 3. simple lock mechanism is employed which is suitable for fpc connection. 4. mating length 0.55mm while achieving a low pro?e of 1.5mm between pcbs, the effective mating length has been extended to ensure that there is some latitude in the mating. since the contact is formed by bending thin plate, it has a spring-like quality. this construction helps make it resistant to dropping and twisting. the roll surfaces are in contact with each other, providing high contact reliability. simple lock mechanism 0.55mm 5. terminal construction prevents sol- der wicking and bridging. applications ?cellular phones ?phs ?portable data terminals ?compact portable devices 0.3mm 1.8mm pcb narrow-pitch connectors p5kf fpc reinforcing plate before mating ideal for fpc-to-pcb connections after mating the simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single-action insertion on the pcb. a stacking height of 1.8mm including the fpc area has been achieved. this enables the number of pins to be doubled white the size remains the same as that for existing fpc connectors. this, in turn, contributes to making products and equipment more compact. specifications 1. characteristics item speci?ations conditions electrical characteristics rated current 0.5a/contact (max. 10 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 minute detection current: 1ma insulation resistance min. 1,000m w (initial) using 500v dc megger contact resistance max. 90m w measured based on the hp4338b measurement method of jis c 5402 mechanical characteristics composite insertion force max. 0.981n {100gf}/contacts contacts (initial) composite removal force min. 0.0588n {6gf}/contacts contacts post holding force min. 0.981n {100gf}/contact measures the maximum load in the post axial direction until removal environmental characteristics ambient temperature ?5? to +85? no freezing at low temperatures soldering heat resistance max. peak temperature of 245? infrared re?w soldering 300? within 5 seconds soldering iron thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m w , contact resistance max. 90m w humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m w , contact resistance max. 90m w bath temperature 40??, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m w , contact resistance max. 90m w bath temperature 35??, saltwarter concentration 5?% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 90m w bath temperature 40??, gas concentration 3? ppm, humidity 75 to 80% r.h. insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/ hours unit weight stacking height 1.5mm, 20 contacts; socket: 0.06g header: 0.04g narrow-pitch connectors for pc boards narrow pitch (0.5mm) connectors p5 series ?p5kf sequence temperature ( c) time (minutes) 1 e55 30 2 25 max. 5 385 30 4 25 max. 5 + 0 - 3 + 10 - 5 + 3 - 0 + 10 - 5
17 axk(5/6)f 2. material and surface treatment product types part name material surface treatment molded portion heat-resistant resin (ul94v-0) contact/post copper alloy contact portion: terminal portion: au plating over ni au plating over ni (except for thick of terminal) stacking height no. of contacts part no. packing socket header inner carton (1-reel) outer carton 1.5 mm 10 axk5f10345j axk6f10345j note 1) ?sterisk mark on end of part no.; j: 2,000 pieces (recommendation) note 1) ?sterisk mark on end of part no.; j: 4,000 pieces (recommendation) 12 axk5f12345j axk6f12345j 14 axk5f14345j axk6f14345j 16 axk5f16345j axk6f16345j 20 axk5f20345j axk6f20345j 22 axk5f22345j axk6f22345j 24 axk5f24345j axk6f24345j 26 axk5f26345j axk6f26345j 30 axk5f30345j axk6f30345j 32 axk5f32345j axk6f32345j 34 axk5f34345j axk6f34345j 40 axk5f40345j axk6f40345j 50 axk5f50345j axk6f50345j 60 axk5f60345j axk6f60345j 70 axk5f70345j axk6f70345j 80 axk5f80345j axk6f80345j 2.0 mm 10 axk5f10545j axk6f10345j 12 axk5f12545j axk6f12345j 14 axk5f14545j axk6f14345j 16 axk5f16545j axk6f16345j 18 axk5f18545j axk6f18345j 20 axk5f20545j axk6f20345j 22 axk5f22545j axk6f22345j 24 axk5f24545j axk6f24345j 30 axk5f30545j axk6f30345j 34 axk5f34545j axk6f34345j 40 axk5f40545j axk6f40345j 50 axk5f50545j axk6f50345j 60 AXK5F60545J axk6f60345j 70 axk5f70545j axk6f70345j 80 axk5f80545j axk6f80345j 100 axk5f00545j axk6f00345j 2.5 mm 10 axk5f10545j axk6f10545j 12 axk5f12545j axk6f12545j 14 axk5f14545j axk6f14545j 16 axk5f16545j axk6f16545j 20 axk5f20545j axk6f20545j 22 axk5f22545j axk6f22545j 24 axk5f24545j axk6f24545j 30 axk5f30545j axk6f30545j 34 axk5f34545j axk6f34545j 40 axk5f40545j axk6f40545j 50 axk5f50545j axk6f50545j 60 AXK5F60545J axk6f60545j 70 axk5f70545j axk6f70545j 80 axk5f80545j axk6f80545j 100 axk5f00545j axk6f00545j notes) 1. in order to reduce the amount of packaging materials used to help protect the global environment, it is recommended tha t each packaging box contain 2,000 units with the ? product number suf?. embossed tape packages containing 1,000 units in the inner carton (1-reel) are also availabl e. the latter have the ? product number suf?. when placing orders, change the ? suf? to the ?uf? p. 2. regarding ordering units, during production: please make orders in 1-reel units. samples for mounting con?mation: please consult us. (see ?egarding sample orders to con?m proper mounting on page 9.) samples: small lot orders are possible. change the suf? ? to the suf? ?. 3. the standard type comes with no positioning bosses. connectors with positioning bosses are available for on-demand production . for this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. stacking height 1.5mm, 10 contacts for sockets: axk5f1033 5j
18 axk(5/6)f dimensions ?socket (stacking height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 40 13.00 9.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 mm general tolerance ?.2 c 0.20 5 0.03 0.50 5 0.05 0.50 5 0.05 0.10 ( 0.80 ) ( 0.80 ) 0.12 5 0.03 1.70 (suction face) 4.80 b 5 0.1 a 4.20 5.80 note) p5k series (stacking heights: 3 mm and 3.5 mm) and the p5ks series (stacking heights: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7 mm, 8 mm, and 9 mm) cannot be mated to this type. stacking height c 1.5 mm 1.35 2.0 mm, 2.5 mm 1.85 ?header (stacking height: 1.5mm, 2.0mm, 2.5mm) dimension table (mm) no. of contacts ab 10 5.50 2.00 12 6.00 2.50 14 6.50 3.00 16 7.00 3.50 18 7.50 4.00 20 8.00 4.50 22 8.50 5.00 24 9.00 5.50 26 9.50 6.00 30 10.50 7.00 32 11.00 7.50 34 11.50 8.00 40 13.00 9.50 50 15.50 12.00 60 18.00 14.50 70 20.50 17.00 80 23.00 19.50 100 28.00 24.50 note) p5k series (stacking heights: 3 mm and 3.5 mm) and the p5ks series (stacking heights: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7 mm, 8 mm, and 9 mm) cannot be mated to this type. stacking height c 1.5 mm, 2.0 mm 1.25 2.5 mm 1.75 ?socket and header are mated stacking height: 1.5 mm stacking height: 2.0 mm stacking height: 2.5 mm 1.50 5 0.15 2.00 5 0.15 2.50 5 0.15 embossed tape dimensions please refer to page 56. 0.96 (suction face) 0.12 5 0.03 2.50 c 0.20 5 0.03 0.50 5 0.05 0.50 5 0.05 0.10 b 5 0.1 a ( 0.75 ) ( 0.75 ) 1.80 3.30
19 axk(5/6)f notes 1. as shown below, excess force dur- ing insertion may result in damage to the connector or removal of the sol- der. please be careful. also, to prevent connector damage plese con?m the correct position before mating con- nectors. 2. keep the pc board warp no more than 0.03 mm in relation to the overall length of the connector. 3. pc boards and recommended metal mask patterns connectors are mounted with high den- sity, with a pitch interval of 0.4 to 0.5 mm. it is therefore necessary to make sure that the right levels of solder are used, in order to reduce solder bridge and other issues. the ?ures to the right are recom- mended metal mask patterns. please use them as a reference. ?socket recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 ? (opening area ratio: 56%) recommended metal mask pattern metal mask thickness: here, 120 ? (opening area ratio: 69%) ?header recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 150 ? (opening area ratio: 58%) recommended metal mask pattern metal mask thickness: here, 120 ? (opening area ratio: 72%) max. 0.03mm max. 0.03mm b 0.05 0.25 0.05 0.05 4.00 6.80 0.05 0.125 0.05 0.30 0.05 0.05 0.50 0.50 0.05 0.23 0.01 0.50 0.01 0.50 0.01 6.80 0.01 5.10 0.01 (0.85) (0.85) b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.70 0.01 6.80 0.01 (1.05) (1.05) b 0.01 0.125 0.05 0.30 0.05 b 0.05 0.25 0.05 0.50 0.05 0.05 0.50 1.60 0.05 4.30 0.05 0.23 0.01 0.50 0.01 0.50 0.01 4.30 0.01 (0.85) (0.85) 2.60 0.01 b 0.01 0.50 0.01 0.50 0.01 0.23 0.01 4.30 0.01 (1.05) 2.20 0.01 (1.05) b 0.01 * see the dimension table on page 18 for more information on the b dimension of the socket and header. regarding general notes, please refer to pages 8 and 9.
|
