 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| this document contains information on a product under development at advanced micro devices (amd). the information is intended to help you evaluate this product. amd re- serves the right to change or discontinue work on this proposed product without notice. publication # 19766 rev: c amendment/ 0 issue date: september 1996 amd-k5 ? processor support for the amd-k5 dual voltage processor application note tm
trademarks amd, the amd logo, and combinations thereof are trademarks of advanced micro devices, inc. amd-k5 is a trademark of advanced micro devices, inc. other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. ? 1996 advanced micro devices, inc. all rights reserved. advanced micro devices reserves the right to make changes in its products without notice in order to improve design or performance characteristics. this publication neither states nor implies any representations or warranties of any kind, including but not limited to any implied warranty of merchant- ability or fitness for a particular purpose. amd makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication or the information contained herein, and reserves the right to make changes at any time, without notice. amd disclaims responsibility for any consequences resulting from the use of the information included herein. contents iii 19766c/0sep1996 support for the amd-k5 dual voltage processor contents background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 dual voltage processor power supply specification . . . . . . . . . . . . . 3 voltage planes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 current requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 dual voltage power supply circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . 5 low cost dual voltage power supply circuit . . . . . . . . . . . . . . . . . . . 6 precision dual voltage power supply circuit . . . . . . . . . . . . . . . . . . . 8 printed circuit layout recommendations . . . . . . . . . . . . . . . . . . . . . 10 component notes and noise reduction . . . . . . . . . . . . . . . . . . . . . . . 11 linear regulator integrated circuits . . . . . . . . . . . . . . . . . . . . . . . . . 11 power supply decoupling capacitors . . . . . . . . . . . . . . . . . . . . . . . . . 11 processor decoupling capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 component layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 split voltage plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 iv contents support for the amd-k5 dual voltage processor 19766c/0sep1996 list of tables and figures v 19766c/0sep1996 support for the amd-k5 dual voltage processor list of tables table 1. core voltage requirements . . . . . . . . . . . . . . . . . . . . . . . . 5 table 2. jumper settings for the low cost and precision dual voltage power supply circuits . . . . . . . . . . . . . . . . . 6 table 3. bill of materials for the low cost dual voltage power supply circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 table 4. bill of materials for precision dual voltage power supply circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 table 5. additional information for amd-k5 dual voltage processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 list of figures figure 1. package marking for the amd-k5 processor (model 0) . 2 figure 2. package marking for the amd-k5 processor (model 1) . 2 figure 3. location of v cc and ground pins in the spga package . 4 figure 4. low cost dual voltage power supply circuit. . . . . . . . . . 7 figure 5. precision dual voltage power supply circuit . . . . . . . . . 9 figure 6. suggested component placement for the low cost dual voltage circuit . . . . . . . . . . . . . . . . . . . . . 13 figure 7. suggested component placement for the precision dual voltage circuit . . . . . . . . . . . . . . . . . . . . . 14 vi list of tables and figures support for the amd-k5 dual voltage processor 19766c/0sep1996 19766c/0sep1996 support for the amd-k5 dual voltage processor background 1 support for the amd-k5 ? dual voltage processor amd-k5 ? processors, manufactured with amds enhanced 0.35- m m process (cs34e), require a lower supply voltage for the core, separate from that used to power the i/o pins (3.38 v or 3.52 v). dual voltage processors can be identified by an h, j, or k in the operating voltage suffix of the ordering part number (opn). see figure 1 for more details. this application note describes two dual voltage regulator cir- cuits that can be used to generate a 3.38-v or 3.52-v i/o voltage supply and a selectable core supply voltage (2.50 v, 2.70 v, 2.93 v, 3.38 v, or 3.52 v) from a standard personal computer power supply. in addition, specific recommendations are given for decoupling capacitor selection and placement to achieve optimal noise reduction levels. background as digital integrated circuit manufacturing processes advance, finer geometries require lower supply voltages to operate properly. processors manufactured with the cs34e process will use a reduced voltage between 2.50 v and 2.93 v to power the core circuitry of the processor. specially designed circuits for the i/o buffers will operate with a separate voltage supply of 3.38 v or 3.52 v to accommodate standard logic and memory devices connected to the bus. 2 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 amd has developed two linear dual voltage regulator circuits, each of which can be used to generate a 3.38-v or 3.52-v supply for the i/o and a core voltage supply of 2.50 v, 2.70 v, or 2.93 v, selectable via jumpers on the motherboard. these cir- cuits also support single voltage versions of the amd-k5 processor. a basic issue in power supply circuit design is noise reduction. excessive noise levels can impair proper operation and con- tribute to possible emi and rfi radiation. this application note provides some basic guidelines for reducing noise gener- ated by fast transients of voltage and current wave forms. figure 1. package marking for the amd-k5 processor (model 0) figure 2. package marking for the amd-k5 processor (model 1) !-$ + pr100 amd-k5-pr100abq e dual voltage processor power supply specification 3 19766c/0sep1996 dual voltage processor power supply specification voltage planes the amd-k5 dual voltage processor has internal voltage planes for core and i/o. the power supply v cc pin assignments for the amd-k5 processor are as follows: notes: 1) some motherboards connect a 5 v supply to pins an-01 and an-03. this connection is not required for the amd-k5 proces- sor and these pins are internally not connected (inc). 2) the voltage select pin (v cc2det ) active low is located at al-01. figure 3 shows the location of the separate v cc and ground pins on the spga package. vcc2 (core): a-07, a-09, a-11, a-13, a-15, a-17, g-01, j-01, l-01, n-01, q-01, s-01, u-01, w-01, y-01, aa-01, ac-01, ae-01, ag-01, an-09, an-11, an-13, an-15, an-17, an-19 vcc3 (i/o): a-19, a-21, a-23, a-25, a-27, a-29, e-37, g-37, j-37, l-33, l-37, n-37, q-37, s-37, t-34, u-33, u-37, w-37, y-37, aa-37, ac-37, ae-37, ag-37, an-21, an-23, an-25, an-27, an-29 inc: an-01, an-03 4 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 figure 3. location of v cc and ground pins in the spga package v cc2 pins (core) other v cc2det pin v ss pins v cc3 pins (i/o) inc pins (see note on page 3) dual voltage power supply circuits 5 19766c/0sep1996 current requirements the amd-k5 dual voltage processor has the following maxi- mum current requirements (rated at maximum t case and maxi- mum v cc2 and v cc3 ): n maximum i cc core of 27 ma / mhz n maximum i cc i/o of 16 ma / mhz note: this information is preliminary and subject to change. see the amd-k5 ? processor data sheet (order# 18522) for the latest information. the core voltage requirements are shown in table 1. the table identifies the dual voltage processors by their operating volt- age suffixes h (2.93 v), j (2.70 v), and k (2.50 v). see figure 1 for more information. dual voltage power supply circuits two dual voltage supply circuits have been developed for use with the amd-k5 processor. both designs support single and dual voltage versions of the amd-k5 processor. the designs are as follows: n low cost dual voltage power supply circuit this circuit meets all the current and voltage requirements for the amd-k5 processor while minimizing costs. see low cost dual voltage power supply circuit on page 6 for more information. n precision dual voltage power supply circuit this circuit uses five-terminal, high-precision regulators that provide tighter regulation and improved design margin for more demanding applications. see precision dual volt- age power supply circuit on page 8 for more information. table 1. core voltage requirements core v cc (opn suffix) minimum center maximum h 2.860 v 2.930 v 3.000 v j 2.565 v 2.700 v 2.835 v k 2.375 v 2.500 v 2.625 v 6 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 low cost dual voltage power supply circuit the circuit diagram for the low cost dual voltage power supply is shown in figure 4. regulator u1 provides a 3.38 v or 3.52 v supply to the processor i/o. jumper j4 selects the voltage level to power the i/o circuitry. when j4 is installed, v cc3 will be 3.38 v 2%. when j4 is not installed, v cc3 will be 3.53 v 2%. regulator u2 provides a variable supply of 2.50 v, 2.70 v, or 2.93 v to the processor core. the supply voltage is selectable via jumpers j3, j2, and j1, respectively. jumpers j5 through j8 should be installed when using single voltage versions of the amd-k5 processor. the jumpers con- nect the output of regulator u1 (i/o voltage) to the output of regulator u2 (core voltage), providing a common voltage (3.38 v or 3.52 v) to both the i/o and core of the processor. regulator u2 senses the presence of a higher voltage on its output pin and safely shuts off its output circuitry. this is an acceptable configuration and does not harm either regulator. using example opns, table 2 shows the appropriate jumper settings for each voltage option. table 2. jumper settings for the low cost and precision dual voltage power supply circuits example opn v cc2 (core) v cc3 (i/o) jumpers installed j1 j2 j3 j4 j5 C j8 amd-k5-pr90ahq 2.93 v 3.38 v x x amd-k5-pr90ajq 2.70 v 3.38 v x x amd-k5-pr90akq 2.50 v 3.38 v x x amd-k5-pr90acq 1 3.38 v 3.38 v x x amd-k5-pr90abq 1 3.53 v 3.53 v x notes: 1. single-voltage mode only. x installed not installed low cost dual voltage power supply circuit 7 19766c/0sep1996 figure 4. low cost dual voltage power supply circuit note: jumper j1 is shorted by a trace and is therefore not required. the j1 jumper header, if installed, can serve as a resting spot for a jumper when it is not installed at the j2 or j3 header. 8 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 precision dual voltage power supply circuit the circuit diagram for the precision dual voltage power supply is shown in figure 5. regulator u1 provides a 3.38-v or 3.53-v supply to the processor i/o, selectable via jumper j4. regulator u2 provides a variable supply (2.50 v, 2.70 v, or 2.93 v) to the processor core, selectable via jumpers j3, j2, and j1. five-terminal voltage regulators (model 1580) provide tighter regulation, adding design margin for applications that may experience extremes in temperature and/or ac line regulation. the precision circuit has the following advantages relative to the low cost circuit: n improved output voltage regulation due to the use of a 12-v input reference voltage n improved tolerance to changes in line, load, and temperature n greater ripple rejection n lower dropout voltage n greater maximum load current (the voltage regulators used in the precision circuit can supply 7.0 amps of current per regulator. the voltage regulators used in the low cost circuit can supply 4.6 amps of current per regulator.) see the data sheets for the voltage regulators for the latest specifications. using example opns, table 2 shows the appropriate jumper settings for each voltage option. precision dual voltage power supply circuit 9 19766c/0sep1996 figure 5. precision dual voltage power supply circuit note: jumper j1 is shorted by a trace and is therefore not required. the j1 jumper header, if installed, can serve as a resting spot for a jumper when it is not installed at the j2 or j3 header. 10 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 printed circuit layout recommendations printed circuit layout recommendations for the amd-k5 pro- cessor dual voltage power supply circuit include the following: 1. use a multiple-plane motherboard. the preferred sequenc- ing of signal, power, and ground planes (assuming a six-layer printed circuit board) are as follows: 2. some of the processor data bus i/o pins are located within the suggested core v cc plane area (see figures 6 and 7). traces for these pins should be restricted to signal layers 1, 2, and 3 (avoid signal 4) to ensure a low-impedance path for return currents. 3. use 0.01 m f mlc capacitors (e.g., avx 0805ya103mat2a) to connect the i/o v cc plane with the core v cc plane, locat- ing these capacitors near any trace with fast edge rate sig- nals. these capacitors provide a low-impedance return path for high-frequency currents. 4. use multiple vias when connecting voltage regulators and large capacitors (greater than 200 m f) to power and ground planes. 5. use minimum copper lead lengths, wherever possible, to reduce inductance and resistance. 6. use correct component orientation, wherever possible, to minimize lead lengths. 7. where possible, use a top-level trace to connect decoupling capacitors to the processors v cc and ground pins. 8. when printed circuit layout permits, some bypass capaci- tors should be located on the outside edge of the processor socket. these capacitors should be positioned to permit direct top-side routing to the processor v cc and ground pins. layer 1: signal 1 layer 2: ground layer 3: signal 2 layer 4: signal 3 layer 5: power layer 6: signal 4 component notes and noise reduction 11 19766c/0sep1996 component notes and noise reduction linear regulator integrated circuits the linear three-terminal voltage regulators, u1 and u2, both require input decoupling capacitors and output bulk decou- pling tantalum capacitors with low esr values (e.g., less than 100 m w ). heat sinks for the to220 packages required for both linear regulator circuits are dependent on mechanical size restrictions of the design and the ambient air temperature specification inside the personal computer enclosure. both linear regulators should have low dropout voltages (approxi- mately one volt) required when the input voltage is 5 v ( 5%). power supply decoupling capacitors the input capacitors c1, c2, and c3 function as decoupling capacitors for the 5 v input power from the personal computer power supply. c5 and c6 provide bulk capacitance at low esr (equivalent series resistance) and esl (equivalent series inductance). c8 to c38 keep the esr and esl low at high fre- quencies (greater than 100 khz) because of the multiple paral- lel current paths. surface mounted capacitors with large lead widths are recommended to reduce lead inductance and resis- tance. the output capacitors are required by the linear regulator cir- cuits to minimize ringing during damping periods and to sup- ply transient current requirements during processor clock edges when maximum peak current occurs. surface mounted capacitors are recommended to reduce lead lengths. processor decoupling capacitance the processor decoupling capacitors (c8 to c42) should be located as close to the processor v cc ground pins as possible. it is recommended that surface mounted capacitors be used to minimize resistance and inductance in the lead lengths. when possible, use traces to connect capacitors directly to the pro- cessors v cc and ground pins. 12 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 component layout a suggested component placement for the low cost dual volt- age power supply circuit is shown in figure 6. table 3 is a bill of materials for the low cost circuit. a suggested component placement for the precision dual voltage power supply circuit is shown in figure 7. table 4 is a bill of materials for the preci- sion circuit. split voltage plane amd recommends using a split voltage plane to supply sepa- rate voltages to the i/o and core of the processor. this approach helps reduce noise levels without requiring the need for additional printed circuit board layers. figures 6 and 7 show examples of suggested component placement for the two circuits. the solid line on each figure represents the approxi- mate location for separation of the voltage power planes. com- ponents have been placed in accordance with their associated voltage plane. jumpers j5 through j8 straddle the planes and connect the planes together when installed. an isolation region (2 mm minimum is recommended) should separate the two voltage planes. note: the ground plane should never be split; it provides a low impedance current sink and reference. component notes and noise reduction 13 19766c/0sep1996 figure 6. suggested component placement for the low cost dual voltage circuit isolation region (2 mm recommended) 14 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 figure 7. suggested component placement for the precision dual voltage circuit isolation region (2 mm recommended) component notes and noise reduction 15 19766c/0sep1996 table 3. bill of materials for the low cost dual voltage power supply circuit item qty. reference no. value footprint description 11 r1 110 w , 1%, 1/8 watt 0805 resistor, surface mount 21 r2 12.4 w , 1%, 1/8 watt 0805 resistor, surface mount 31 r3 187 w , 1%, 1/8 watt 0805 resistor, surface mount 41 r4 107 w , 1%, 1/8 watt 0805 resistor, surface mount 51 r5 143 w , 1%, 1/8 watt 0805 resistor, surface mount 61 r6 931 w , 1%, 1/8 watt 0805 resistor, surface mount 71 r7 432 w , 1%, 1/8 watt 0805 resistor, surface mount 89 c1, c2, c3, c5, c6, c39Cc42 330 m f , 6.3 v, 20% avx size e capacitor, surface mount, tantalum, avx part no. tpse337m063100 or equivalent 92 c4, c7 0.33 m f , 16 v, 20% 0805 capacitor, surface mount, ceramic, avx (y5v dielectric) part no. 012063g334zat2a or equivalent 10 31 c8Cc22 and c23Cc38 0.1 m f 0805 capacitor, surface mount, ceramic, avx (x7r dielectric) part no. 0805yc104mat2a or equivalent 11 2 u1, u2 lt1585 or ez1585 to220 linear regulator, 3 terminal (5 amp) (linear technology or semtech) 12 1 hs heat sink heat sink heat sink can be thermally connected to both u1 and u2, but is electrically isolated via mica insulators or thermalloy to220 heat sink (size depends on printed circuit layout and ambient temperature specification for personal computer) (e.g., thermalloy 7020b-mt) 13 8 j1Cj8 berg header 2 pin th headers, 2 pin, through hole, 0.1 in spacing 16 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 table 4. bill of materials for precision dual voltage power supply circuit item qty. reference no. value footprint description 11 r1 110 k w , 1%, 1/8 watt 0805 resistor, surface mount 21 r2 12.4 w , 1%, 1/8 watt 0805 resistor, surface mount 31 r3 187 w , 1%, 1/8 watt 0805 resistor, surface mount 41 r4 107 w , 1%, 1/8 watt 0805 resistor, surface mount 51 r5 143 w , 1%, 1/8 watt 0805 resistor, surface mount 61 r6 931 w , 1%, 1/8 watt 0805 resistor, surface mount 71 r7 432 w , 1%, 1/8 watt 0805 resistor, surface mount 81 r8, r9 2 w , 5%, 1/8 watt 0805 resistor, surface mount 99 c1, c2, c3, c5, c6, c39Cc42 330 m f , 6.3 v, 20% avx size e capacitor, surface mount, tantalum, avx part no. tpse337m063100 or equivalent 10 2 c4, c7 0.33 m f, 16 v, 20% 0805 capacitor, surface mount, ceramic, avx (y5v dielectric) part no. 012063g334zat2a or equivalent 11 31 c8Cc22 and c23Cc38 0.1 m f 0805 capacitor, surface mount, ceramic, avx (x7r dielectric) part no. 0805yc104mat2a or equivalent 12 2 c43, c44 1 m f, 16 v 20% 1210 capacitor, surface mount, ceramic, avx (y5v dielectric) part no. 012063g105zat2a or equivalent 13 1 c45 33 m f , 20 v avx size d capacitor, surface mount, tantalum, avx part no. tpsd336m020r0200 or equivalent 14 2 u1, u2 lt1580 or ez1580 to220 linear regulator, 5 terminal (7 amp) (linear technol- ogy or semtech) 15 1 hs heat sink heat sink heat sink can be thermally connected to both u1 and u2, but is electrically isolated via mica insulators or thermalloy to220 heat sink (size depends on printed circuit layout and ambient temperature specification for personal computer) (e.g., thermalloy 7020b-mt) 16 8 j1Cj8 berg header 2 pin th headers, 2 pin, through hole, 0.1 in spacing additional information 17 19766c/0sep1996 additional information the following third-party application notes provide informa- tion about products designed to accommodate amd-k5 dual voltage processors. table 5. additional information for amd-k5 dual voltage processors title order number available from: power solutions for the amd-k5 ? microprocessor an96-1 semtech corporation 652 mitchell road newbury park, ca 91320 attention: andrew stewart tel: 805-498-2111 fax: 805-498-3804 power solutions for the amd-k5? processors application note 133 linear technology corporation 1630 mccarthy blvd. milpitas, ca 95035-7487 attention: craig varga tel: 408-432-1900 fax: 408-434-0507 18 support for the amd-k5 ? dual voltage processor support for the amd-k5 dual voltage processor 19766c/0sep1996 |
Price & Availability of 19766
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |