View T17C1_1964639.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lcd module specification products name:apax t17 c1 43.2cm(17.0 inch) sxga(1280x1024) 16 m color tft lcd module 5 .0v l preliminary specification this technical specification is tentative and it will be changed without notice. ?ia1~a?|3--?q x_ ?o????? 76 ?? 39 ?1 4 ? tel:02 - 87912868 fax:02 - 87912869 version. 1.0
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 2/26 version 2.2 contents revision history general description 1. absolute maximum ratings 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. electrical specifications 2.1 tft lcd module 2.2 backlight unit 3. block diagram 3.1 tft lcd module 3.2 backlight unit 4. interface specifications 4.1 the lvds interface signal description 4.2 ac timing specifications ( de only mode ) 4.3 color data input assignment 5. optical characteristics 5.1 test conditions 5.2 optical specifications 6. outline dimention 7. precaution 7.1 assembly and handling precaution 7.2 safety precaution 8. 8. packaging 8.1 packing specifications 8.2 packing method
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 3/26 version 2.2 9. incoming inspection da 10. definition of shipping label on module
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 4/26 version 2.2 revision history version date description ver1.0 ver1.1 jun.23,?00 aug.24,?00 issue preliminary specification. page 9 - update (1) tft lcd module on 1.2 electrical absolute ratings. input signal voltage: old: vcc+0.3(max.) new: 4.3(max.) - update (2) backlight unit on 1.2 electrical absolute ratings. lamp frequency: old: -(typ.) new: 45(typ.) - update 2.1 tft lcd module on 2 electrical specifications. power supply current: old: -tbd(typ.)/tbd(max.) new: -(typ.)/1000(max.) ripple voltage: old: tbd(typ.) new: -(typ.) add lvds differential input voltage: 100(min.)/-(typ.)/600(max.) add lvds common input voltage: tab(min.)/1.2(typ.)/tbd(max.) ?h? level logical input voltage: old: 2.3(min.)/ vcc(max.) new:2.0(min.)/3.6(max.) ?l? level logical input voltage: old: 0.9(max.) new: 0.8(max.) rush current: old: tbd(typ.)/tbd(max.) new: -(typ.)/1.5(max.) - update note (1) page 11 - update note (2) measurement conditions. - update 2.2 backlight unit. operating frequency: old: -(typ.) new: 45(typ.) page 12 - update 3.1 tft lcd module. page 14 - update data order of lvds channel o2 on sellvds = low or open. old: na new: de - update data order of lvds channel o2 on sellvds = high. old: na new: de page 15 - update 4.2 ac timing specifications (de only mode) page18 - update 5.1 test conditions. supply voltage: old: v dd (symbol) new: vcc(symbol) - update 5.1 test conditions. inverter driving frequency: old: 43(value) new: 40(value) - update 5.1 test conditions. inverter: old: tbd new: sumida h05-4785 - update 5.2 optical specifications. contrast ratio: old: tbd(typ.) new: (300)(typ.) response time ( t on ): old: tbd(max.) new: 30(max.) response time ( t off ): old: tbd(max.) new: 50(max.) luminance of white(average luminance): old: -(min.) new: 200(min) luminance uniformity chromaticity: - rx: old: tbd(min.)/(0.59)(typ.)/tbd(max.) new: 0.59(min.)/0.61(typ.)/0.63(max.) - ry: old: tbd(min.)/(0.34)(typ.)/tbd(max.) new: 0.32(min.)/0.34(typ.)/0.36(max.) - gx: old: tbd(min.)/(0.29)(typ.)/tbd(max.) new: 0.28(min.)/0.30(typ.)/0.32(max.) - gy: old: tbd(min.)/(0.58)(typ.)/tbd(max.) new: 0.55(min.)/0.57(typ.)/0.59(max.)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 5/26 version 2.2 revision history version date description ver1.2 ver2.0 nov.06?00 dec.27?00 page18 - update 5.2 optical specifications. luminance uniformity chromaticity: - bx: old: tbd(min.)/(0.15)(typ.)/tbd(max.) new: 0.13(min.)/0.15(typ.)/0.17(max.) - by: old: tbd(min.)/(0.12)(typ.)/tbd(max.) new: 0.12(min.)/0.14(typ.)/0.16(max.) - wx: old: tbd(min.)/(0.31)(typ.)/tbd(max.) new: 0.29(min.)/0.31(typ.)/0.33(max.) - wy: old: tbd(min.)/(0.33)(typ.)/tbd(max.) new: 0.31(min.)/0.33(typ.)/0.35(max.) - update note to gamma voltage not yet corrected. page 7 - update general specifications. display colors: old: 8 bits, 16.7m new: 16m - update mechanical specifications. depth(d): old: 20(max.) new: 21(max.) page 8 - update 1.1 absolute ratngs of enviroment. vibration(non-operating): old: 2(max.) new: 1.5(max.) note: old: (1)~(4) new: (1)~(5) page 17 - update 4.4 power on/off sequence. old: 0 t 1 tbd new: 0 t 1 10ms old: 0 t 2 tbd new: 0 t 2 50ms old: 0 t 3 tbd new: 0 t 3 50ms old: 1sec t 4 new: 500ms t 4 old: tbd t 5 new: 450ms t 5 old: tbd t 6 new: 90ms t 6 attached drawing - update attached drawing form?m170141011? to ?m170141013?. page 9 - updated 2.1 tft lcd module ripple voltage: old: -(min.)/ -(typ.)/ tbd(max.) new: -(min.)/ -(typ.)/100(max.) lvds common input voltage: old: tbd(min.)/ 1.2(typ.)/ tbd(max.) -(min.)/ 1.2(typ.)/ -(max.) page 18 - update 5.2 optical specifications. luminance uniformity chromaticity: rx: old: 0.59(min.)/0.61(typ.)/0.63(max.) new: 0.61(min.)/0.63(typ.)/0.65(max.) ry: old: 0.32(min.)/0.34(typ.)/0.36(max.) new: 0.34(min.)/0.36(typ.)/0.38(max.) gy: old: 0.55(min.)/0.57(typ.)/0.59(max.) new: 0.57(min.)/0.59(typ.)/0.61(max.) by: old: 0.12(min.)/0.14(typ.)/0.16(max.) new: 0.07(min.)/0.09(typ.)/0.11(max.) wx: old: 0.29(min.)/0.31(typ.)/0.33(max.) new: 0.30(min.)/0.32(typ.)/0.34(max.) - delete note: gamma voltage not yet corrected.
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 6/26 version 2.2 revision history version date description ver2.1 ver2.2 jan.16?01 feb.01?01 page 7 - update module weight: old: -(typ.)/2200(max.) new: 2000(typ.)/2150(max.) page 14 - revise description? sellvds = low or open? to ?sellvds = low or open (vss ~ 0.8v)? - reivse description ? sellvds = hight? to ? sellvds = hight (2.0v ~ 3.6v) page 15 - update period of 4.2 ac timing specification: old:14.8(min.) new:(14.8)(min.) attached drawing - update attached drawing form?m170141013? to ?m17014101a?. page 13 - update description of 7pin. page 14 - delete sellvds = high page 23 ~ 24 - add 8. packaging page 25 - add 9.incoming inspection day page 26 - 10. definition of shipping label on module
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 7/26 version 2.2 general description overview this product is a 17.0? tft liquid crystal display module with 2 dual ccfls backlight unit and 30 pins lvds interface. this module supports 1280 x 1024 sxga mode and can display 16 million colors. the inverter module for backlight is not built in. features -sxga (1280x1024 pixels) resolution -2 dual ccfls (cold cathode fluorescent lamp) -de only mode -lvds (low voltage differential signaling) interface application -tft-lcd monitor general specificati0ns item spec. unit screen size 17.0 diagonal inch bezel opening area 342.0(h) x 274.4(v) mm effective display area 337.92(h) x 270.34(v) mm driver element a-si tft active matrix - pixel number 1280 x r.g.b. x 1024 pixel pixel pitch 0.264(h) x 0.264(w) mm pixel arrangement rgb vertical stripe - display colors 16m color transmissive mode normally white - surface treatment haze 25%,hard-coating,anti-static - mechanical specifications item min. typ. max. unit horizontal(h) 403.5 404 404.5 mm vertical(v) 321.7 322.2 322.7 mm module size depth(d) - - 21 mm weight - 2,000 2,150 g
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 8/26 version 2.2 1. absolute maximum ratings 1.1 absolute ratings of environment values item symbol min. max. unit note storage temperature tst -20 +60 oc (1) operating temperature (ambient temperature) top 0 +50 oc (1),(2) shock(non-operating) snop - 30 g (3),(5) vibration(non-operating) vnop - 1.5 g (4),(5) note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta Q 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel surface should be 0 oc min. and 60 oc max. note (3) 6 ms, half sine wave, 1 time for x, y, z. note (4) 10 ~ 500 hz, 0.5 hr each x, y, z. note (5) at testing vibration and shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 90 80 40 60 20 5 storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 90 80 40 60 20 5 storage range
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 9/26 version 2.2 1.2 electrical absolute ratings (1) tft lcd module values item symbol min. max. unit note power supply voltage vcc -0.3 6.0 v input signal voltage v in -0.3 4.3 v ta = 25 2 oc (2) backlight unit value item symbol min. typ. max. unit note lamp current i l 6.0 13.0 14.0 m a rms (1),(2) lamp frequency f l 30 45 80 khz (1) note (1) permanent damage to device may occur if maximum values are exceeded. function operation should be restricted to the conditions described under normal operating conditions. note (2) specified values are for a dual lamp (refer to the note (1) of 2.2 backlight unit for further information). 2. electrical specifications 2.1 tft lcd module module value parameter symbol min. typ. max. unit note power supply voltage v cc 4.5 5.0 5.5 v - power supply current l cc - - 1000 ma (1) ripple voltage vrp - - 100 mv - lvds differential input voltage vid 100 - 600 mv lvds common input voltage vic - 1.2 - v logic ?h? input voltage (sellvds) vih 2.0 - 3.6 v - logic ?l? input voltage (sellvds) vil vss - 0.8 v - rush current irush - - 1.5 a (2)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 10/26 version 2.2 note (1) measured with 2 lines vertical stripe pattern. slash area is lighted off. the other white area is lighted on. note (2) measurement conditions 470us +5.0v gnd 0.9vcc 0.1vcc r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b lcd panel vcc sw +5.0v +12v q2 2sk1470 q1 2sk1475 r1 47k r2 1k vr1 47k c2 0.01uf c1 1uf c3 1uf fuse (lcd module input) (control signal) (high to low)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 11/26 version 2.2 2.2 backlight unit backlight ( 2 dual ccfls) value parameter symbol min. typ. max. unit note lamp input voltage v l 640 720 800 v rms (1) lamp current i l 6.0 13.0 14.0 ma rms (1) - - 1150 v rms 25 o c lamp turn on voltage v s - - 1500 v rms 0 o c operating frequency f l 30 45 80 khz (1) lamp life time l bl 50,000 - - hrs 13ma power consumption p l - 9360 - mw (4) note (1) lamp current is measured by utilizing a current meter for high frequency as shown below: note (2) the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (3) the lamp frequency may produce interference with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference the lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible. note (4) p l = i l v l . note (5) the lifetime (hr) of a lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 and i l = 14.0 marms until one of the following event occurs: (a) when the brightness becomes 50% or lower than its original, (b) when the effective ignition length becomes 80% or lowers than its original value. (effective ignition length is defined as an area that has less than 70% brightness compared to the brightness in the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter should be designed with care so as not to produce too much current leakage from high-voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting caused by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occurs. when the above situation is confirmed, the module should be operated in the same manners as it is installed in your instrument. lcd module 1 inverter a current meter hot 1 (pink) gnd (white) 2 4 hot 2 (pink)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 12/26 version 2.2 the connector information of blacklight unit. pin symbol description remark 1 hv1 high voltage pink 2 hv2 high voltage pink 3 nc no connection - 4 lv ground white note (1) connector part no.: bhr-04vs-1 (jst) note (2) user?s connector part no.: sm04 (4.0) b-bhs-1-tb (jst) 3. block diagram 3.1 tft lcd module 3.2 backlight unit 1 hot 1 2 hot 2 3 nc 4 cold 1 hot 1 2 hot 2 3 nc 4 cold v l tft-lcd panel (1280x1024x3) data driver scan driver backlight unit timing control dc/dc converter & reference voltage generator lvds receiver lamp connector (jst-bhr-04vs-1) input connector (jae-fi-se30p-hf) rxo2(+/-) rxo3(+/-) rxoc(+/-) vcc gnd sellvds rxe0(+/-) rxe1(+/-) rxe2(+/-) rxe3(+/-) rxec(+/-) rxo0(+/-) rxo1(+/-)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 13/26 version 2.2 4. interface specifications 4.1 the lvds interface signal description pin name description 1 vcc +5.0v power supply 2 vcc +5.0v power supply 3 vcc +5.0v power supply 4 gnd ground 5 gnd ground 6 gnd ground 7 sellvds select lvds data order. connect this pin to low. see the following table. 8 test test pin should be tied to ground. 9 gnd ground 10 rxo3+ positive lvds differential data input. channel o3 (odd) 11 rxo3- negative lvds differential data input. channel o3(odd) 12 rxoc+ positive lvds differential clock input. (odd) 13 rxoc- negative lvds differential clock input. (odd) 14 rxo2+ positive lvds differential data input. channel o2 (odd) 15 rxo2- negative lvds differential data input. channel o2 (odd) 16 rxo1+ positive lvds differential data input. channel o1 (odd) 17 rxo1- negative lvds differential data input. channel o1 (odd) 18 rxo0+ positive lvds differential data input. channel o0 (odd) 19 rxo0- negative lvds differential data input. channel o0 (odd) 20 rxe3+ positive lvds differential data input. channel e3 (even) 21 rxe3- negative lvds differential data input. channel e3 (even) 22 rxec+ positive lvds differential clock input. (even) 23 rxec- negative lvds differential clock input. (even) 24 rxe2+ positive lvds differential data input. channel e2 (even) 25 rxe2- negative lvds differential data input. channel e2 (even) 26 rxe1+ positive lvds differential data input. channel e1 (even) 27 rxe1- negative lvds differential data input. channel e1 (even) 28 rxe0+ positive lvds differential data input. channel e0 (even) 29 rxe0- negative lvds differential data input. channel e0 (even) 30 gnd ground note (1) connector part no.: fi-se30p-hf (jae) note (2) the first pixel is even. note (3) input signal of even and odd clock should be the same timing.
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 14/26 version 2.2 sellvds = low or open lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel e0 data order eg0 er5 er4 er3 er2 er1 er0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel e1 data order eb1 eb0 eg5 eg4 eg3 eg2 eg1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel e2 data order de na na eb5 eb4 eb3 eb2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel e3 data order na eb7 eb6 eg7 eg6 er7 er6 lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel o0 data order og0 or5 or4 or3 or2 or1 or0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel o1 data order ob1 ob0 og5 og4 og3 og2 og1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel o2 data order de na na ob5 ob4 ob3 ob2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel o3 data order na ob7 ob6 og7 og6 or7 or6
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 15/26 version 2.2 4.2 ac timing specifications (de only mode) signal item symbol min. typ. max. unit note frequency fc 31 54 (67.5) mhz period tc 14.8 18.5 32.2 ns high time tch - 4/7 - tc lvds clock low time tcl - 3/7 - tc setup time tlvs 600 - - ps lvds data hold time tlvh 600 - - ps frame rate fr - - 75 hz total tv 1025 1066 1274 th tv=tvd+tvb display tvd 1024 1024 1024 th vertical active display term blank tvb 1 42 250 th total th 650 844 960 tc th=thd+thb display thd 640 640 640 tc horizontal active display term blank thb 10 204 320 tc note: hs and vs input signals should be fixed to low for stable operation. otherwise, the m odule would operate abnormally. input signal timing diagram t vd t vb t v t h de t hb valid display data (640 clocks) t c dclk t hd de data
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 16/26 version 2.2 4.3 color data input assignment data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 r7 r6 g5 g4 g3 g2 g1 g0 r7 r6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 17/26 version 2.2 0 t 1 10ms 0 t 2 50ms 0 t 3 50ms 500ms t 4 50% 0v 0v 50% t 6 t 5 t 3 t 1 0.1v dd 0.9 v cc 0.1v cc 0.9 v cc t 4 t 2 valid power on power off signals power on/off sequence backlight (recommended) 450ms t 5 90ms t 6 power supply v cc 4.4 power on/off sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. note. (1) the supply voltage of the external system for the module input should be the same as the definition of v cc. (2) apply the lamp voltage within the lcd operation range. when the backlight turns on before the lcd operation or the lcd turns off before the backlight turns off, the display may momentarily become abnormal screen. (3) in case of v cc = off level, please keep the level of input signals on the low or keep a high impedance. (4) t4 should be measured after the module has been fully discharged between power of and on period. (5) interface signal shall not be kept at high impedance when the power is on.
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 18/26 version 2.2 5. optical characteristics 5.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 5.0 v input signal according to typical value in "electrical characteristics" inverter current i l 13.0 ma inverter driving frequency f l 40 k hz inverter sumida h05-4785 the measuring method is shown in 5.2 optical specifications. the following items are measured under stable conditions about 20 minutes after the module works. the optical characteristics should be measured under lamp current i l = 13.0 m arms and in a dark environment ( 2 lux) or equivalent state with the methods shown in note (6). 5.2 optical specifications specifications item symbol conditions min. typ. max. unit note contrast ratio cr 250 300 - - (2),(6) t on - 15 30 ms response time t off - 35 50 ms (3) luminance of white (average luminance) l ave 200 (250) - cd/m 2 (4),(6) cross talk ct - - 5.0 % (5),(6) rx 0.61 0.63 0.65 red ry 0.34 0.36 0.38 gx 0.28 0.30 0.32 green gy 0.57 0.59 0.61 bx 0.13 0.15 0.17 blue by 0.07 0.09 0.11 wx 0.30 0.32 0.34 luminance uniformity chromaticity white wy x =0 , y =0 viewing normal angle 0.31 0.33 0.35 x + 50 60 - hor. x - 50 60 - y + 30 40 - viewing angle ver. y - cr 10 50 60 - deg. (1), (6) white variation w x =0 , y =0 viewing normal angle - 1.25 1.4 (6),(7)
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 19/26 version 2.2 note (1) definition of viewing angle x, y: note (2) definition of contrast ratio: the contrast ratio can be calculated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance on the white raster (gray level 255) l 0: luminance on the black raster (gray level 0) cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (7). note (3) definition of response time: 100% 90% 10% 0% gray level 255 gray level 0 gray level 255 time tf optical response tr 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 20/26 version 2.2 note (4) definition of average luminance of white: measure the luminance of gray level 255 at 5 points l ave = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (7). note (5) definition of cross talk (ct): ct = | y b ? y a | / y a 100 (%) where: y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note (6) measuring setup: the measurement supposes to be executed after stabilizing the panel at given temperature during 20 minutes in the case of abrupt temperature change. the measurement shall be executed after lighting at rating 20 minutes. in order to stabilize the luminance, lcd shall not be gotten winds. photometer (topcon bm-5a) field of view = 2o 500 mm lcd module lcd p anel center of the screen a ctive y a, u (640, 128) y a, r (1120, 512) y a, d (640, 896) y a,l (160, 512) (0, 0) a ctive gray 0 (320, 128) (960, 768) ( 0 , 0 ) y b,u (640, 128) y b,r (1120, 512) y b, d (640, 896) y b, l (160, 512) ( 1279, 1023 ) ( 1279, 1023 ) gray level 128 gray level 128
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 21/26 version 2.2 note (7) definition of luminance uniformity w (5 points, gray level 255): w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] 6. mechnical drawing please refer to the attached drawings. active area vertical line number horizontal line number : test point x=1 to 5 5 1 horizontal line number [pixel] 2 3 4 0 320 640 960 1279 0 256 512 768 1023 x
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 22/26 version 2.2 7. precaution 7. 1 assembly and handling precaution (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assembly and install module into user?s system are only in clean working areas. the dust and oil may cause an electrical short or worsen the polarizer. (3) it?s not permitted to pressure or impulse the module because the lcd panel and backlight, (4) always follow the correct power sequence when user connects and operates the lcd module to prevent damage to the cmos lsi chips during latchup. (5) do not pull the i/f connectors in or out while the module is operation. (6) do not disassembly the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) any moisture come into contact with the lcd module is dangerous because lcd modules is turned on with moisture on its surface may cause it damage. (9) the high temperature or humidity may reduce the performance of module, to store lcd module within the specified storage condition. (10) the ambient temperature is lower than 10oc may reduce the display quality, for example, response time become slowly, the starting voltage of ccfl is higher than room temperature. 7.2 safety precaution (1) the startup voltage of backlight is approximately 1000 volts. it may cause electrical shock during assembly with inverter. do not disassemble the module or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage.
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 23/26 version 2.2 8. packaging 8.1 packing specifications (1) 5 lcd modules / 1 box (2) box dimensions : 534(l) x 316(w) x 462(h) mm (3) weight : approximately 8.0kg ( 5 modules per box) 8.2 packing method figures 8-1and 8-2 are the packing method. figure. 8-1 packing method
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 24/26 version 2.2 figure. 8-2 packing method
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 25/26 version 2.2 9. incoming inspection day the supplier should be acquainted the inspection results (acceptance or rejection) by customer, and the results are in accordance with the incoming inspection standard within 30 days after the date of the bills of lading. should customer fail to so notify the supplier within the said 30 days period. the customer?s right to reject the lcms shall then lapse, and the said lcms shall be deemed to have been accepted by the customer.
dcc no.: 14007038 issue date: feb.1?2001 model: m170e1 -01 approval 26/26 version 2.2 made in taiwan e207943 m170e1 rev. c1 10 . definition of shipping label on module serial id included the information as follow: 1. manufactured date: year: 0~9, for 2000~2009 month: 0~9, a~c, for jan. ~ dec. day: 0~9, a~y, for 1 st to 31st, exclude i and o 2. revision code: cover all the change 3. model code 4. serial no.: manufacturing sequence of product 5. product line: 1 -> line1, 2 -> line 2, etc. serial no. product line year, month, date cmo internal use cmo internal use revision model code the barcode nameplate is pasted on each module as illustration, and its definition is as following explanation. (1) model name : m170e1 (2) revision: rev.xx, for example : c1, c2 ?etc. (3) serial id: 0 8 c 1 0 0 1 1 1 w 1 0 0 3 5

power before servicing. high voltage caution disconnect the electric risk of electric shock. made in taiwan m170e101 rev. c1 e207943

▲Up To Search▲

Price & Availability of T17C1

	To Download T17C1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .