phlatlight ? pt54 projection chipset summary data sheet ? 2010 luminus devices, in c. - all rights reserved updated 3/5/10 pds-001051 rev 07 technology overview luminus devices? projection tech nology is an innovative solid- state light source created to replace arc lamps in projection systems. enabled by unique use of photonic lattice technolo- gy, phlatlight chipsets represent a major breakthrough in brightness that delivers all th e benefits of solid state light sources in projections applications: - wide color gamut for vivid colors, exceeds ntsc. - instant turn-on, no more wait time. - high reliability; no lamp replacement - environmentally friendly technology - mercury-free. - electronic control of color points and light intensity on a frame by frame basis phlatlight products benefit fr om numerous innovations in the domain of packaging, therma l management and optical cou- pling that allow designers to achieve efficient light engine de- signs and deliver high screen brightness. c ollimated angular in tensity distribution features ? matched rgb chipset with 5.4mm 2 emitting area designed for small projector applications ? photonic lattice technology for very high surface brightness ? wide color gamut: red 623 nm, green 526 nm, blue 462 nm, ep-blue 460nm typical dominant wavelength ? single emitting area per color a llows for collection with sin- gle lens for si mplified optics ? 4:3 aspect ratio optimized fo r svga and xga micro-displays ? over 1575 emitted white lumens at 8000k color temperature from single chipset under continuous wave operation ? uniform surface emission ? thermally efficient type cx common anode package ? rohs compliant (eu-2002/95/ec directive) applications ? specifically engineered for high brightness pocket-size, ultra portable front projectors, head-up projection displays ? optimized for micro-display diag onal sizes ranging from 0.4? to 0.6? with 4:3 aspect ratio. suitable for dlp? (0.55? svga and xga), lcos , 3lcd (0.55? svga and xga) and htps microdisplays
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 2 optical and electrical characteristics symbol red green blue ep-blue 1 preliminary unit bin kit mpb mpb mpb epa emitting area 5.4 5.4 5.4 5.4 mm 2 emitting area dimensions 2.7 x 2.0 2.7 x 2.0 2.7 x 2.0 2.7 x 2.0 mm x mm characteristics at reference pulsed drive current i f 2,3 reference duty cycle 4 25 50 25 25 % recommended peak drive current 5 typ i f 13.5 13.5 13.5 13.5 a peak luminous flux 6 typ v 750 1550 275 325 lm peak radiometric power typ r 4.2 3.3 5.6 7.7 w dominant wavelength min dmin 619 516 455 450 nm typ d 623 525 462 460 nm max dmax 630 535 469 468 nm fwhm - spectral band width at 50% of v typ ? d 19 38 20 20 nm color saturation 7,8 typ 1.00 0.80 0.99 0.99 chromaticity coordinates 7,8 typ x 0.697 0.171 0.144 0.154 typ y 0.303 0.702 0.040 0.024 forward voltage min v fmin 2.2 3.5 3.5 3.2 v typ v f 2.6 4.9 4.9 4.0 v max v fmax 3.4 5.9 5.9 5.2 v dynamic resistance typ dyn 0.05 0.09 0.07 0.05 device thermal characteristics and lifetime thermal coefficien of photometric flux typ -1.0 -0.2 ~0 ~0 % / oc thermal coefficient of radiometric flux typ -0.6 -0.2 -0.2 -0.2 % / oc forward voltage temperature coeffi cient typ -1.5 -1.0 -3.0 -3.0 mv / oc median lifetime 9 >60,000 >60,000 >60,000 >60,000 hours
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 3 bin kit mpb mpb mpb epa a characteristics at reference continuous drive current i f (continuous wave) 2 reference drive current typ i f 8.1 8.1 8.1 8.1 a luminous flux typ v 420 1085 200 235 lm radiometric flux typ r 2.3 2.2 3.7 5.1 w dominant wavelength typ d 624 528 464 462 nm fwhm - spectral band width at 50% of v typ ? d 18 38 21 21 nm color saturation 7,8 typ 1.00 0.84 0.99 0.99 chromaticity coordinates 7,8 typ x 0.698 0.183 0.141 0.153 typ y 0.301 0.703 0.044 0.025 forward voltage min v fmin 2.0 3.1 3.1 2.8 v typ v f 2.3 4.4 4.4 3.6 v max v fmax 3.0 5.3 5.3 4.6 v dynamic resistance typ dyn 0.02 0.03 0.02 0.05 note 1: ep-blue is recommended fo r new designs. please see page 9 for part ordering numbers. note 2: all ratings are based on operation with a constant heat sink temperature t hs = 40oc. see thermal resistance section for t hs definition. note 3: parameters rated at typical duty cy cle and pulsed operation frequency f>240hz; note 4: duty cycle used to specify device ratings under pulsed operation. phlatlight devices can operate at duty cycles ranging from 1% to 100%. at higher duty cycles, drive current sh ould be adjusted to maintain the junction temperature at desire d levels to meet th e application lifetime requirements. note 5: in pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds note 6: for blue and ep-blue devices, total flux from emitting area at typical dominant wavelength. note 7: in cie 1931 chromaticity diagram coordinates, normalized to x+y+z=1 note 8: for reference only note 9: estimated median lifetime, assuming tj<80oc for red devices , tj<115oc for blue devices and tj<125oc for green devices absolute maximum ratings symbol red green blue ep-blue unit maximum current 1,2 max 16161616a absolute maximum j unction temperature 3 max t jmax 110 170 170 170 oc storage temperature range -40/+100 -40/+100 -40/+100 -40/+100 oc optical and electrical characteristics symbol red green blue ep-blue 1 preliminary unit dc t t -- - = t t
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 4 note 1: luminus phlatlight leds are designed for operation to an absolute ma ximum forward drive current density of 2.5a/mm 2 cw, and 3a/ mm 2 pulsed (f>240hz, duty cycle < 60%). please refer to absolute maximum rating table ab ove for specific absolute maximum currents for the products covered in this datasheet. product lifetime data is specified at recommended forward driv e currents. sustained operation at absolute maximum currents wil l result in a reduction of device lifetime compared to recommended forward drive currents. actual device lifetimes will also depe nd on junction temperature. refer to the lifetime derating curv es for further information. note 2: in pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds. note 3: sustained operation above maxi mum operating junction temperature (t jmax ) will result in redu ced device life time.
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 5 luminous flux variation with wavelength: v = f ( d ) at recommended operating current i f see note 1,2 on page 6 luminous flux variation with drive current - v = f (i f ) - typical see notes 1,2 on page 6. dominant wavelength variat ion with forward current - d = f(i f ) - typical see notes 1,2 on page 6. 0 200 400 600 800 1000 615 620 625 630 635 d (nm) v (lm) 0 250 500 750 1000 1250 1500 1750 2000 515 520 525 530 535 d (nm) v (lm) 100 150 200 250 300 350 400 450 450 455 460 465 470 d (nm) v (lm) epa blue mpb blue 0 200 400 600 800 1000 1200 1400 1600 1800 2 4 6 8 10 12 14 16 i f (a) v (lm) 0 50 100 150 200 250 300 350 400 450 2 4 6 8 10 12 14 16 i f (a) v (lm) mpb- blue epa - blue 0 200 400 600 800 1000 2 4 6 8 10 12 14 16 i f (a) v (lm) 620 622 624 626 628 630 2 4 6 8 10 12 14 16 i f (a) d (nm) 522 524 526 528 530 532 534 536 538 540 2 4 6 8 10 12 14 16 i f (a) d (nm) 456 458 460 462 464 466 468 2 4 6 8 10 12 14 16 i f (a) d (nm) epa -blue mpb -blue
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 6 forward voltage variation with drive current - v f = f(i f ) - typical optical spectrum (typical) see note 3 on page 6. chart notes note 1: for pulsed operation, ty pical rgb duty cycles used are 25%, 50% and 25% respectively (t hs =40 o c). note 2: yellow square indica te device operating point under re ference conditions listed in t he optical and electrical character- istics table. note 3: typical spectrum at re commended peak drive current. 0 1 2 3 4 5 6 246810121416 i f (a) v f (v) 0 0.5 1 1.5 2 2.5 3 3.5 2 4 6 8 10 12 14 16 i f (a) v f (v) 0 1 2 3 4 5 6 246810121416 i f (a) v f (v) ep blue mpb blue 0 0.2 0.4 0.6 0.8 1 1.2 400 450 500 550 600 650 700 wavelength (nm) normalized radiometric power
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 7 thermal resistance thermistor information the thermistor used in phlatlight? device s mounted on core-boards is from murata manufacturing co. the global part number is ncp15xh103j03rc. please see http://www.murata.com/ or http:// www.murata.co.jp for details on calculating thermistor tempera- ture. t hs definition = 3 mm from core-board window copper core-board t j t b t hs t a t ref window frame thermistor die junction thermal interface material heat sink window copper core-board t j t b t hs t a t ref window frame thermistor die junction thermal interface material heat sink typical thermal resistance r j-b 1 note 1: thermal resistance val- ues are based on finite element analysis model results correlated to measured r j-hs data . 1.0 o c/w r b-hs 2 note 2: thermal resistance is based on egraph 1205 thermal interface. 0.2 o c/w r j-hs 1,2 1.2 o c/w r j-ref 2 1.0 o c/w
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 8 mechanical dimensions (standard die configuration) 12.0 10.50 2x 1.7 1.6 alignment holes 26.5 0.5 16.0 0.5 2.00 emitting area 2.70 emitting area 2x 2.4 0.1 fastener holes a a pin 1 red device blue device green device 6.3 1.6 b section a-a "b" "a" "c" detail b dimensions in millimeters dwg-001262 dimension name description nominal dimension tolerance "a" top of metal substrate to top of glass 0.94 0.13 "b" emitting area to top of glass 0.67 0.16 "c" top of metal substrate to emitting area 0.27 0.05 pin # function 1 thermistor (+) 2 thermistor (-) 3-5 power (-) 6-8 power (+) ? red, green and blue pt54 phlatlight tm leds are individually assembled into a type cx, common anode copper core- board with a footprint of 26.5 mm x 16 mm. ? dimension above for information only. for detailed dimens ions, always refer to the la test revision of the dwg- 001262 package outline ? connector: molex. part number: 874380843. please refe r to dwg-001262 (separate document) for pin-out informa- tion
pt54 - summary datasheet - revision 07 ? 2010 luminus devices, inc. - all rights reserved page 9 ordering information the products, their specifications and other information appearing in this document are subject to change by luminus devices wi thout notice. luminus devices assumes no liability for errors that may appear in this document, and no liability othe rwise arising from the applicati on or use of the product or information contained herein. no ne of the information provided herein should be considered to be a representation of the fit ness or suitability of the product for any particular application or as any other form of warranty. luminus devices? product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products . nothing herein is to be construed as constituting an additio nal warranty. no infor- mation contained in this publication may be considered as a waiver by luminus devices of any intellectual property rights that luminus devices may have in such information. phlatlight? is a registered trademark of luminus devices, inc., all rights reserved. this product is protected by u.s. patents 6,831,302; 7,074, 631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,87 0; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903;7,345,416; 7,348,603; 7,388,233; 7,391,0 59 patents pending in the u.s. and other countries. customer part number die configuration color description pt-54-r-c21-mpb standard red bin kit mpb red phlatlight pt54 consisting of a 5.4mm 2 led, thermistor and connector mounted on a type cx copper-core pcb pt-54-g-c21-mpb green bin kit mpb green phlatlight pt54 consisting of a 5.4mm 2 led, thermistor and connector mounted on a type cx copper-core pcb pt-54-b-c21-mpb 1 note 1: not recommended for new designs. blue bin kit mpb blue phlatlight pt54 consisting of a 5.4mm 2 led, thermistor and connector mounted on a type cx copper-core pcb PT-54-B-C21-EPA 2 note 2: bin kit epa blue is recommended for new designs. ep-blue bin kit epa blue phlatlight pt54 consisting of a 5.4mm 2 led, thermistor and connector mounted on a type cx copper-core pcb
|
