12-28-98 sb98107 rev. a power tool sentry sen-pt surge protector with replaceable fuses sentry ecf-8 and ECF-11 replacement fuses form no. sen-pt page 1 of 1 bif doc #7005 bussmann dimensional data 0.300 2x 0.768 0.252 0.504 0.625 1.250 1.300 1.560 1.040 1.630 buss buss lr104482 r r lr104482 catalog symbol: sen transient voltage spike protector rated voltage: 125 volts ac surge dissipation: 65 joules peak surge: 6,000 volts maximum surge: 4,500 volts response time: 1 nanosecond clamping voltage: 395 volts agency approval: csa certified, lr104482 for use with buss ecf-5, 125 vac, 5 amp fuses. warning: for indoor use only. catalog symbol: ecf-8 and ECF-11 replacement fuses voltage rating: 125 vac interrupting rating: 10,000 air agency approvals: u.l. listed dual protection against voltage surges and short-circuits. compact size - easy to carry. indicator light - glows to show that sentry is ready. compact design provide wall-hugging connection. replaceable fuses. sentry can be used with all household appliances and elec- tronics up to 4 amps. including lap-top computers, tvs, vcrs, telephones, answering machines, stereos, and similar devices. note: sentry is not a lightning arrestor and will not pro- vide protection against direct or nearby lightning strikes. recommended fuse size motor size replacement catalog number 1/4 hp or less ecf-8 amp fuse installed in sentry 1/3 hp or less ECF-11 amp spare fuse enclosed. the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications.
|
