24 1 . specifications of in series sg series specially designed for audio this is optimum for digital audio and hi-fi vcr. since os-con has solid electrolyte and resin-sealed structure, it doesn't expose the phenomenon of element vibration. adopted ofc (oxygen free copper) into the lead terminals for improvement of tone quality. sleeve color : purple marking : polarity( ), rated voltage, capacitance (gold) : sanyo , os-con , lot.no. max. operating temp.(105?) specifications *1 to use an os-con when the operating temperature exceeds 85? on a component with a rated voltage of 25v, reduce the voltage by 0.25v for every degree(1?) relative to the value at 85?(25v). *2 if any doubt arises, measure the current after applying voltage(voltage treatment) for 30 minutes at 105?. the rated voltage should be applied for 6.3 to 20wv, while a temperature reduction voltage should be applied for 25wv. items characteristics temporary:less than 20% of the rated voltage, continuous:less than 10% of the rated voltage 1. operating temperature range 2. capacitance tolerance (120hz) 3. tangent of loss angle(tan d ) (120hz) 4. leakage current ( m a/2min.)(or less) *2 5. esr (100k to 300khz) -55? to +105? m : ?0% value in table 5 or less 0.02cv (0.04cv for g.h size) value in table 5 or less 6. temperature characteristics impedance ratio at 100khz., +20 ? 7. high-temperature load 105 ? , 2,000hrs. (g, h size ; 1,000hrs.) rated voltage applied (25wv ? 20v applied) *1 8. moisture resistance (60 ? , 90 to 95 % rh, 1,000hrs. no voltage) 9. reverse voltage guarantee -55? +105? z / z 20? z / z 20? 1.0 to 1.25 0.75 to 1.0 d c/c tan d leakage current d c/c tan d leakage current within ?0% 1.5 times of item 3 or less item 4 or less within ?0% 1.5 times of item 3 or less item 4 or less wv (sv) m f 6.3 (7.2) 10 (11.5) 16 (18.4) 20 (23) 25 (25) dimensions size list wv : rated voltage (sv) : surge voltage(room temperature) size code c f d x l f f d g(max.) k(max.) 6.3x6.8 2.5?.5 0.45 0.5 0.5 6.3x9.8 2.5?.5 0.60 0.5 0.5 8.0x10.5 3.5?.5 0.60 0.8 0.8 10x10.5 5.0?.5 0.60 0.8 0.8 12.5x22 5.0?.0 0.80 0.8 0.8 16x25 7.5?.0 0.80 0.8 0.8 d e f g h (unit : mm) f g a' c k a b b' standards of lead position mark ;ideal lead position c;the middle point of a-a' sleeve f d 0.05 l+1 max. 15min. 4min. 20min. f f d+0.5max. 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 1000 2200 c e f h d f c c d e f g h c c d e e f c c c d
25 1 . specifica tions of in series t ab le 5 sg series characteristics list size code part number * 1 esr (100khz to 300khz) (m w ) (max.) nominal capacitance ( m f) rated voltage (v) maximum allowable ripple current (marms) * 2 tangent of loss angle (max.) leakage current ( m a) (max.) * 3 *1 capacitance tolerance : m ; 20% *2 100khz, +45 c *3 after 2 minutes temperature coefficient for ripple current ambient temp.( c ) coefficient to +45 1.0 +65 0.85 +85 0.7 +95 0.4 +105 0.25 2.35 3.40 5.00 6.00 8.80 3.20 10.56 5.92 7.50 13.20 15.04 13.60 18.80 27.20 32.00 18.90 40.00 48.00 44.00 41.58 300.80 640.00 554.40 c d e f g h 25sg4r7m 25sg6r8m 25sg10m 20sg15m 20sg22m 16sg10m 16sg33m 6sg47m 25sg15m 20sg33m 16sg47m 10sg68m 20sg47m 20sg68m 16sg100m 6SG150M 20sg100m 16SG150M 10sg220m 6sg330m 16sg470m 16sg1000m 6sg2200m 25 25 25 20 20 16 16 6.3 25 20 16 10 20 20 16 6.3 20 16 10 6.3 16 16 6.3 4.7 6.8 10 15 22 10 33 47 15 33 47 68 47 68 100 150 100 150 220 330 470 1000 2200 100 100 90 90 70 90 70 60 70 70 60 50 40 36 30 30 30 28 27 25 20 15 15 1130 1140 1150 1200 1300 1150 1370 1430 1650 1710 1830 2000 2450 2600 2740 2780 3210 3260 3370 3500 6080 9750 9750 0.05 0.05 0.05 0.06 0.06 0.06 0.06 0.07 0.05 0.06 0.06 0.07 0.06 0.06 0.06 0.07 0.06 0.06 0.07 0.07 0.08 0.09 0.13
|
