keller keller ag f?r druckmesstechnik st. gallerstrasse 119 ch-8404 winterthur tel. 052 - 232 11 26 fax 052 - 232 70 67 keller gesellschaft f?r druckmesstechnik mbh schwarzwaldstrasse 17 d-79798 jestetten tel. 07745 - 9214 - 0 fax 07745 - 9214 - 50 companies approved to iso 9001 / en 29001 3/98 internet: http://www.keller-druck.ch subject to alterations m ano g auge (basic version) display of: pressure, pressure unit, temperature, elapsed time alternative: pressure, pressure unit, max.- and min. value all functions are executed with the front key of the instrument. it allows the display to be set to zero and to change the measuring cycle for prolonged battery life. two pressure sensors can be connected to the m ano g auge (optional). analog outputs can be provided 4?0 ma or 0?0 v (optional). m ano r ecord (m ano g auge plus data recording) based on the m ano g auge , the m ano r ecord records and stores the measured values. the front key is used to select which data shall be displayed and stored, and to set the recording interval and the number of readings (memory for 960 or optionally 8100 readings). the read-out of the stored data is via rs 232 serial interface (logger software and k101 cable available as option). m ano c ali (c alibrator v ersion plus data recording) in the basic mode, the m ano c ali displays: pressure, pressure unit, max.- and min. values. units are selected via the front key (bar, psi, kpa, mpa,?. m ano c ali also incorporates the functions tara (sets a new temporary zero reference), leak (measures a pressure change over a programmable time) and res (reduces the standard resolution by factor 10). a seperate hold-key on the instrument freezes the reading. this instrument has the same data recording features as the m ano r ecord . i ntelligent d igital m anometers this is a highly accurate microprocessor-controlled pressure measuring instrument. sensobrain tm , a keller-designed low power signal processor, transmits the signals of the pressure- and temperature sensor to the microprocessor, which digitally compensates the sensor data. this mathematical modelling of the pressure sensor virtually eliminates all errors over a wide temperature range. all keller- and kavlico-sensors are compatible with the electronics of the intelligent manometers. m ano g auge / m ano r ecord m ano c ali integrated capacitive cell (30 mbar? bar) series 11 transducer (1?0 bar / -1? bar / -1?000 bar) series 6 transducer (10?00 bar) hex 27 g 1/4" hex 19 g 1/4" ?76 mm 46 mm 80 mm 80 mm front key button hold-key (mano cali only) ?45 g 1/4" keller keller keller
keller ag f?r druckmesstechnik st. gallerstrasse 119 ch-8404 winterthur tel. 052 - 232 11 26 fax 052 - 232 70 67 keller gesellschaft f?r druckmesstechnik mbh schwarzwaldstrasse 17 d-79798 jestetten tel. 07745 - 9214 - 0 fax 07745 - 9214 - 50 companies approved to iso 9001 / en 29001 3/98 internet: http://www.keller-druck.ch subject to alterations keller ?specific characteristics total accuracy (1) m ano g auge / r ecord m ano c ali range 0?0? 0,1% typ. 0,05 % typ. 0,2% max. 0,1% max. measuring interval (2) sec 1 2 (1) includes linearity, repeatability, hysteresis, temperature and resolution of the display (2) x 2 for two transducers (not for m ano c ali ) ?electrical characteristics supply lithium-battery 3,6 v (included) battery-life > 200 days at continuous operation (4) output signal (optional) - analog (3) (m ano r ecord / g auge ) 4..20 ma or 0..10 v - numerical (m ano r ecord / c ali ) rs 232 (3) the use of an analog signal requires an external supply between 10?8 vdc (4) > 100 days for m ano c ali ?options (on request) - manometer housing in metal* - 1 or 2 external transducers (remote)* - transmitter output connector* - special programs - logger software and k101 cable - intrinsically safe version (eex-ia)* * only m ano r ecord and m ano g auge logger the logger-software allows the read-out of the stored data from the intelligent manometer. the data transfer takes place via the serial interface on the pc. the m ano r ecord /m ano c ali is connected through a cable k101 (supplied with logger software). the logger-software offers many further processing possibilities of the read-out data, and meets all the requirements of modern windows-software: - graphical display - tabulated display - export into other windows-programs - storage into files ?mechanical characteristics manometer housing polyamid 12 transducer see data sheet of transducer total weight approx. 250 g pressure connection see data sheet of transducer protection ip 65 environmental characteristics operating temperature c - 10 60 compensated range (5) c0 50 storage temperature c - 30 80 display (5) c0 50 (5) others upon request vented gauge or absolute range resolution 30 mbar 0,01 mbar 300 mbar 0,1 mbar 1000 mbar 0,3 mbar -1 2 bar 1 mbar 10 bar 3 mbar 30 bar 10 mbar sealed gauge or absolute range resolution 100 bar 0,03 bar 300 bar 0,1 bar 600 bar 0,2 bar 1000 bar 0,3 bar in m ano g auge and m ano r ecord the measuring ranges are divided by 12 bit or 3000 points. in m ano c ali over 13 bit or 6000 points. the resolution is determined by the measuring range and the number of measuring points. specifications m ano g auge / m ano r ecord m ano c ali sealed or vented gauge range resolution -1 2 bar 0,5 mbar -1 10 bar 1,8 mbar -1 25 bar 4,3 mbar 200 bar 0,03 bar 350 bar 0,05 bar 700 bar 0,1 bar
|
