fuseholders for gmt type hls, hlt, pct indicating fuses form no. hls, hlt, pct page 1 of 1 bif doc #5010 bussmann 12-21-98 sb98107 rev. a the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled.this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. dimensional data catalog symbol: hls, hlt, pct fuseholders for gmt type indicating fuses electrical rating?0v dc, 125v ac u.l. recognized (guide # izlt2, file e14853) 15amp (60v dc) materials: body: thermosplastic, u.l. 94vo flammability rating terminals: tin-plated bifrucated copper for use with gmt type indicating fuses * angle bar mounts on common or center terminals only. ?minimum of 4 poles required. **sl version is not available with bus bars. b1 (angle bar only)* b2 ("l" bar only) b3 ("u" bar only) b5 ("l" &"u" bars) b4 (angle & "l" bars) multiple fuseholders with bus bars ordering information?atalog no. body style hlt hls (no flanges) no. of poles 01 thru 25 (min. of 2 poles required for bus bars) type of bus bars used b1*, b2, b3, b4, b5, sl** (short leads .135") ml** (medium leads .250") ** not available with bus bars termination location b (both ends) l (left only) r (right only) bus bar position p4 (outside left only) p3 (outside right only) p2 (outside both sides) p1? (inside both sides) .31" approx. (7.7mm) .19" (4.8mm) .25" (6.4mm) .41" (10.4mm) .18" (4.8mm) .07" (1.8mm) . 25" (6.4mm) hls hls-f hls-c printed circuit board application shown with gmt fuse installed .84" (21.3mm) .60" (15.3mm) .1" (25.4mm) .84" (21.3mm) .63" (15.9mm) .45" (11.4mm) .11" (2.8mm) .19" (4.8mm) pct-a pct .13" (3.2mm) .25" (6.4mm) hlt-f hlt-d wire wrap terminals .025" x .063" (.64mm) (1.6mm) .13" (3.2mm) .60" (15.3mm) 1" (25.4mm) . 26" (6.5mm) hlt fuse terminal alarm terminal note: similar body dimensions of all holders are identical. 1.21" (30.8mm) panel mounting data .86" (21.8mm) .27 " (6.7mm) .15" (3.8mm) dia. .16" (3.9mm) dia. .08" dia. holes (2.1mm) (3 holes per poles of fuseholder) .25" x "a" spaces (6.4mm) tolerance to be non-accumulative . 41" (10.4mm) . 25" (6.4mm)
|
