composite backshells a-78 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2009 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com a b c d e f g 447-328 composite standard profle emi/rfi band-in-a-can backshell with strain-relief clamp and self-locking rotatable coupling f e g .71 (18.0) ref entry diameter h clamp closed notes metric dimensions (mm) are in parenthesis and are for reference only. 1. coupling nut supplied unplated. 2. see table i in intro for front-end dimensional details. 3. connector designator: a mil-dtl-5015, -26482 series ii, and -83723 series i and iii f mil-dtl-38999 series i, ii l mil-dtl-38999 series 1.5 (jn1003) h mil-dtl-38999 series iii and iv g mil-dtl-28840 u dg123 and dg123a self-locking rotatable coupling standard profile finish symbol ( see table iii) connector designator a, f, l, h, g and u product series 447 - emi/rfi non-environmental banding backshells 447 h s 328 xm 19 20 k s angle and profle s - straight w - 90 elbow basic part number connector shell size ( see table ii) cable entry ( see table iv) band option band supplied with k option (omit for none) slot option s - pigtail termin. slot (omit for none) accommodates 600-052-1 band .44 (11.2) typ. .71 (18.0) ref h entry dia. clamp closed 1.60 (40.6) max. anti- decoupling device pigtail termination slot
composite backshells a-79 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2009 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com a b c d e f g 447-328 composite standard profle emi/rfi band-in-a-can backshell with strain-relief clamp and self-locking rotatable coupling table iv: cable entry * entry diameter equals maximum wire bundle diameter. entry dia.* .03 (0.8) .22 (5.6) .28 (7.1) .34 (8.6) .46 (11.7) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) .95 (24.1) h .06 (1.5) .94 (23.9) 1.17 (29.7) 1.28 (32.5) 1.41 (35.8) 1.50 (38.1) 1.56 (39.6) 1.69 (42.9) 1.81 (46.0) 1.91 (48.5) 2.02 (51.3) entry code 10 12 14 16 18 20 22 24 28 32 clamp closed .03 (0.8) .26 (6.6) .34 (8.6) .46 (11.7) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) .95 (24.1) 1.02 (25.9) max entry dash no.** 10 12 14 16 20 20 22 24 32 32 e .06 (1.5) .69 (17.5) .75 (19.1) .81 (20.6) .88 (22.4) .94 (23.9) .97 (24.6) 1.06 (26.9) 1.13 (28.7) 1.19 (30.2) 1.34 (34.0) f .09 (2.3) .88 (22.4) 1.00 (25.4) 1.13 (28.7) 1.31 (33.3) 1.38 (35.1) 1.44 (36.6) 1.63 (41.4) 1.75 (44.5) 1.88 (47.8) 2.13 (54.1) g .09 (2.3) 1.19 (30.2) 1.25 (31.8) 1.31 (33.3) 1.38 (35.1) 1.44 (36.6) 1.47 (37.3) 1.56 (39.6) 1.63 (41.4) 1.69 (42.9) 1.78 (45.2) table ii: connector shell size **consult factory for additional entry sizes available. shell size for connector designator* a 08 10 12 14 16 18 20 22 24 28 f/l 08 10 12 14 16 18 20 22 24 C h 09 11 13 15 17 19 21 23 25 C g C C 11 13 15 17 19 C 23 25 u C 08 10 12 14 16 18 20 22 24 table iii: finish symbol finish description xm 2000 hour corrosion resistant electroless nickel xmt 2000 hour corrosion resistant ni-ptfe, nickel-fluorocarbon polymer. 1000 hour grey tm xw 2000 hour corrosion resistant cadmium/olive drab over electroless nickel
|