6.0-18.0 ghz balanced temp. comp. module 6.0-18.0 ghz balanced temp. comp. module MWT-0618S-TCM/0618z-tcm MWT-0618S-TCM/0618z-tcm email: info@mwtinc.com www.mwtinc.com 4268 solar way fremont california 94538 phone: (510) 651-6700 fax: (510) 651-2208 4268 solar way fremont california 94538 phone: (510) 651-6700 fax: (510) 651-2208 min att (@zero bias) frequency (ghz) frequency (ghz) typical insertion loss (db) typical input/output return loss (db) 5 10 15 20 25 max attenuation 6 12 18 2 3 4 5 6 1.0 2.0 3.0 4.0 13.0 12.0 11.0 10.0 flat frequency response typical specifications at 25 c low insertion loss at zero bias built-in thermistor for temperature compensation high dynamic range flexible adjustment to suit different temperature compensation requirements electrical specifications (ta=25 c) symbol parameters units min typ max freq frequency range ghz 6.0 18.0 il insertion loss @ min attentuation (no bias) db 2.5 3.0 atten. insertion loss @ max attentuation db 12.0 13.0 il/ f insertion flatness over freq @ any atten. +/-db 0.6 0.8 vswr in input vswr ----- 1.6:1 1.8:1 vswr out output vswr ----- 1 .6:1 1.8:1 vdc power supply voltage +v 6.0 8.0 9.0 idc dc current ma 10.0 20.0 s 11 s 22 low vswr all rights reserved. microwave technology, inc. all specifications subject to change without notice.
6.0-18.0 ghz balanced temp. comp. module 6.0-18.0 ghz balanced temp. comp. module MWT-0618S-TCM/0618z-tcm MWT-0618S-TCM/0618z-tcm notes: construction email: info@mwtinc.com www.mwtinc.com 4268 solar way fremont california 94538 phone: (510) 651-6700 fax: (510) 651-2208 4268 solar way fremont california 94538 phone: (510) 651-6700 fax: (510) 651-2208 construction: notes: .055 max. w/caps & bond wires .041 .025 .390 .390 .500 .500 .110 .110 .095 .095 dc .08 .08 .405 .405 .08 .08 rf in rf out rf out z s o o o o .062 .062 .088 .088 .158 .158 .184 .184 .246 .246 the 15 mil alumina substrates and 10 mil copper fet ridge are brazed onto the 25 mil carrier using auge preform. the pin diodes are attached to the cu ridge using ausn preform. all capacitors are attached using ausn preforms. the flanges are designed to accommodate 0-80 unf-2a socket or fillister head screws on .400 center-to-center hole spacing. the modules are mechanically and electrically designed to be cascaded. configurations 1. dimension in inches 2. tolerance: xxx= +/- .005 xx= +/- .01 1. custom module specifications and/or custom module mechanical configurations are available. 2. operating temperature range is -55 degrees celsius to +105 degrees celsius. 3. all modules are serialized and shipped with data measured at 25 degrees celsius. data includes swept small signal gain, swept input and output return loss. noise figure and p-1db are measured in 1 ghz increments. special module testing is available. 4. test fixtures are available. 5. microwave technology reserves the right to ship modules with performance above the typical specifications. rf in dc dc dc all rights reserved. microwave technology, inc. all specifications subject to change without notice.
|
