1/97 n/al. 8.300. 200.01 r07 miniature series 07 general purpose regulator 1/8 " and 1/4 " port sizes l compact design l full flow gauge ports l low torque, non-rising adjusting knob l snap action knob locks pressure setting when pushed in l standard relieving models allow reduction of outlet pressure even when the system is dead-ended l can be disassembled without the use of tools or removal from the air line our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. technical data fluid: compressed air maximum pressure: 20 bar (300 psig) operating temperature: -20 to +65? (0 to +150?) * * air supply must be dry enough to avoid ice formation at temperatures below +2? (+35?). typical flow at 10 bar (145 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a droop of 1 bar (14.5 psig) from set: 1/8 " ports: 6,5 dm 3 /s (14 scfm) 1/4 " ports: 7 dm 3 /s (15 scfm) gauge ports: 1/8 " ptf with ptf main ports 1/8 " iso rc with iso rc main ports 1/8 " iso rc with iso g main ports materials: body: zinc bonnet: acetal valve: brass/nitrile valve seat: acetal elastomers: nitrile ordering information see ordering information on the following pages. iso symbols relieving relieving
n/al. 8.300. 200.0 2 1/97 r07 our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. alternative models 0 r 7 h h h h h - h h - port size substitute 1/8 " 1 1/4 " 2 threads substitute ptf a iso rc taper b iso g parallel g port size model number flow? dm 3 /s (scfm) weight kg (lbs) g1/8 R07-100-RNKG 6,5 (14) 0,19 (0.31) g1/4 r07-200-rnkg 7 (15) 0,19 (0.31) or dering inf ormation. models listed are include iso g threads, relieving diaphragm, 0,3 to 7 bar (5 to 100 psig) outlet pressure adjustment range* without gauge. outlet pressure adjustment ranges* substitute 0,1 to 0,7 bar (1 to 10 psig) a 0,3 to 3,5 bar (5 to 50 psig) e 0,3 to 7 bar (5 to 100 psig) k 0,3 to 10 bar (5 to 145 psig) m** option substitute standard 0 low flow seat 2 h.p. unit, 10 bar (145 psig) 5** gauges substitute with g without n diaphragm substitute relieving r non relieving n option substitute not applicable 0 wall mounting bracket and tamper resistant 40 mm panel nut for p1h unit panel nut field modification pressure gauge r1/8 connection 1/8" ptf connection plastic: 18-025-003 plastic: 2962-89 knob and screw: 18-001-092 2 bar (30 psig): 18-013-214 metal: 2962-04 screw only: 6097-08 4 bar (60 psig): 18-013-990 18-013-211 10 bar (150 psig): 18-013-989 18-013-212 25 bar (350 psig): 18-013-908 accessories * outlet pressure can be adjusted to pressures in excess of, and less than, those specified. do not use these units to control pressures outside of the specified ranges. ** when specifying 10 bar (145 psig) unit, eg. r07-2 05 -rn m g, also note correct code at 6th digit. inlet pressure: 10 bar g (145 psig) flow characteristics 0 2 4 6 8 10 dm 3 /s air flow 0 4 8 12 16 20 24 scfm 8 6 4 2 0 outlet pressure bar g 100 80 60 40 20 0 psig t ypical p erf ormance characteristics port size: 1/4" range: 0,3 to 7 bar (5 to 100 psi) ? approximate flow at 7 bar (100 psig) inlet pressure, 6.3 bar (90 psig) set pressure and a droop of 1 bar (14.5 psig) from set.
1/97 n/al. 8.300. 200.0 3 dimensions mm (inc hes) r07 our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. 54 (2.13) 38 (1.50) 41 (1.63) 40 (1.57) 24 (0.95) 64 (2.52) 75 (2.91) 28 (1.1) 19 (0.73) 23 (0.91) panel mounting hole diameter 30 mm (1.19 " ) maximum panel thickness 0 to 6 mm (0 to 0.25 " ) 34 (1.34) 42 (1.65) 6 (0.22) 38 (1.50) 7 (0.29) 24 (0.93) 63 (2.47) 28 to 44 (1.09 to 1.73) ser vice kits item type part number service kit relieving 3407-02 non-relieving 3407-01 item part number all models 18-025-003 brac ket kit ref erence service kit includes slip ring, diaphragm, standard valve seat with o-ring, valve, valve spring. brac ket mounting use 3 mm (1/8 " ) screws to mount bracket to wall.
n/al. 8.300. 200.0 4 1/97 our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. w arning these products are intended for use in industrial compressed air systems only. do not use these products where pressures and temperatures can exceed those listed under ?echnical data? before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult norgren. through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. the system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. system designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. system designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. water vapor will pass through these units and will condense into liquid if air temperature drops in the downstream system. install an air dryer if water condensation could have a detrimental effect on the application. r07
|
