nec's power amplifier for bluetooth? class 1 upg2301tq features ? operation frequency f opt = 2,400 to 2,500 mhz (2 450 mhz typ.) ? supply voltage v cc1, 2 = v bias = 2.7 to 3.6 v (3.3 v typ.) ? control voltage v cont = 0 to 3.6 v (2.5 v typ.) v enable = 0 to 3.1 v (2.9 v typ.) ? circuit current i cc = 120 ma typ.@ v cc1, 2 = v bias = 3.3 v, v cont = 2.5 v, v enable = 2.9 v, p in = +4 dbm ? maximum power p out(max.) = +23 dbm typ.@ v cc1, 2 = v bias = 3.3 v, v cont = 2.5 v, v enable = 2.9 v, p in = +4 dbm ? gain control range gcr = 23 db typ.@ v cc1, 2 = v bias = 3.3 v, v cont = 0 to 2.5 v, v enable = 2.9 v, p in = +4 dbm ? power gain g p = 23 db typ.(reference value) ? high efficiency pae = 50% typ.(reference value) ? shut down function ? high-density surface mounting 10 pin plastic tson package (2.4 2.55 0.6 mm) nec's pg2301tq is a gaas hbt mmic for power ampli?er for bluetooth class 1. this device realizes high ef?ciency, high gain and high output power by using ingap hbt. this device is housed in a low pro?le 10-pin plastic tson package. description california eastern laboratories data sheet application ? power amplifier for bluetooth class 1 ? wireless lan electrical characteristics (unless otherwise speci?ed, t a = +25c, v cc1 , 2 = v bias = 3.3 v, f = 2,450 mhz, external input and output matching) parameter symbol test conditions min. typ. max. unit circuit current i cc v cont = 2.5 v, v enable = 2.9 v, p in = +4 dbm 110 120 130 ma shut down current i shut down v cont = 2.5 v, v enable = 0 v, p in = +4 dbm ? 0.1 1.0 a output power 1 p out1 v cont = 2.5 v, v enable = 2.9 v, p in = +4 dbm +21 +23 +24.5 dbm output power 2 p out2 v cont = 0 v, v enable = 2.9 v, p in = +4 dbm ? 0 +1 dbm gain control range gcr v cont = 0 to 2.5 v, v enable = 2.9 v, p in = +4 dbm 20 23 ? db electrical characteristics (unless otherwise speci?ed, t a = +25 c, vcc1 , 2 = v bias = 3.3 v, f = 2,450 mhz, external input and output matching) parameter symbol test conditions min. typ. max. unit ef?ciency pae v cont = 2.5 v, v enable = 2.9 v, p in = +4 dbm ? 50 ? % power gain g p v cont = 2.5 v, v enable = 2.9 v, p in = ? 5 dbm ? 23 ? db
upg2301tq absolute maximum ratings parameter symbol ratings unit supply voltage v cc1,2 5.0 v v bias control voltage v cont 3.6 v v enable circuit current i cc 400 ma control current i cont 0.5 ma i enable power dissipation p d 700 note mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 55 to +150 c input power p in +10 dbm note mounted on double copper-clad 50 50 1.6 mm epoxy glass pwb, t a = +85 c pin connections and internal block diagram 2301 1 2 3 4 5 10 9 8 7 6 5 4 3 2 1 6 7 8 to p v iew to p v iew bottom v iew 9 1 0 1 2 3 4 5 10 9 8 7 6 bias circuit bias circuit pin no. pin name 1 output/ v cc2 2 v enable 3 v bias 4 gnd 5 v cc1 6 input 7 v cont 8 n.c. 9 gnd 10 gnd recommended operating range (t a = +25c) parameter symbol min. typ. max. unit operating frequency f opt 2,400 2,450 2,500 mhz supply voltage v cc1,2 2.7 3.3 3.6 v v bias control voltage v cont 0 2.5 3.6 v v enable 0 2.9 3.1
upg2301tq elevaluation circuit (v cc1 , 2 = v bias = 3.3 v, f = 2,450 mhz) v cont v cc1 v cc2 v enabl e v bias input 1 pf 1,000 pf 1,000 pf 1 pf 1,000 pf output 1,000 pf 1.8 nh 15 nh bias circuit 10 9 8 7 6 1 2 3 4 5 bias circuit the application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
upg2301tq vct in vc1 vds ve n vc 2 pg2301tq hbt pa ec-ver. 2 10pin tson out c6 c5 c3 c1 c4 l2 l1 c2 illustration of the test circuit assembled on evaluation board component list symbol rating part number manufacturer c1, c3, c4, c5 1,000 pf grm39ch102j50 murata c2, c6 1 pf grm39ch010c50 murata l1 15 nh tfl0816-15n susumu l2 1.8 nh tfl0816-1n8 susumu
upg2301tq 0.5 1.0 1.5 2.0 3.0 2.5 0 -5 35 30 25 20 15 10 5 0 40 45 50 55 160 140 120 100 80 60 40 20 0 i cc p out pa e output power, efficiency , circuit current vs. control vol ta ge output power p out (dbm), ef ficiency p ae (%) circuit current i cc (ma) control v oltage v cont (v) typical characterlistics condition : f = 2,450 mhz, v cc1 = v cc2 = v bias = 3.3 v, v enable = 2.9 v, p in = +4 dbm, external input and output matching condition : f = 2,450 mhz, v cc1 = v cc2 = v bias = 3.3 v, v enable = 2.9 v, v cont = 2.5 v, external input and output matching -15 -5 -10 0 + 5 +10 +15 0 55 50 45 40 35 30 25 20 15 10 5 160 140 120 100 80 60 40 20 0 pa e p out i cc output power, efficiency , circuit current vs. input power output power p out (dbm), ef ficiency p ae (%) circuit current i cc (ma) input power p in (dbm) remark the graphs indicate nominal characteristics.
upg2301tq package dimensions 10-pin plastic tson (unit: mm) 2.400.15 2.200.1 2.250.1 (0.6 max. ) (0.125) (1.95) (0.95) (0.3) 2.550.15 0.400.05 0.180.05 (1.70) (0.35) (bottom view) note () : reference value life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury. the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec co m p ound semiconductor devices, ltd . 02/04/200 4 part number package marking supplying form pg2301tq-e1-a 10-pin plastic tson 2301 ? embossed tape 8 mm wide ? pin 5, 6 face the perforation side of the tape ? qty 3 kpcs/reel ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: pg2301tq
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix Ca indicates that the device is pb-free. the Caz suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cels understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay to better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cels liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.
|
