sensitron semiconductor technical data ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? SEN-0541 preliminary data rev.- power operational amplifier applications: ? motor drivers ? servo amplifiers ? magnetic deflection ? audio features: ? 10a peak current ? supply range 10v to 40v ? programmable current limit ? replacement for opa541, oma541, msk541 ? wide range of available packages ? hermetic and non-hermetic versions available ? mil-std-883 screening available maximum ratings: electrical characteristics: supply voltage, v s 40v continuous output current 5a power dissipation, internal 125w case operating temperature range -55 0 c to 125 0 c storage temperature range -55 0 c to 150 0 c junction temperature 150 0 c differential-mode input voltage v s common-mode input voltage v s characteristics symbol condition max. units max. forward voltage drop v f1 @ 1a, pulse, t j = 25 c 0.56 v v f2 @ 1a, pulse, t j = 125 c 0.51 v max. reverse current i r1 @v r = 45v, pulse, t j = 25 c 100 a i r2 @v r = 45v, pulse, t j = 125 c 4.5 ma max. junction capacitance c t @v r = 5v, t c = 25 c f sig = 1mhz, v sig = 50mv (p-p) 53 pf
sensitron semiconductor technical data ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? SEN-0541 characteristics symbol condition 1 grp. a min. max. units input offset voltage vio t a = +25c 1 -1 +1 mv input offset voltage drift ? v io / ? t t a = -55c and +125c 2,3 -30 +30 v/c 1 -50 +50 pa input bias current i ib 2,3 -50 +50 na 1 -30 +30 pa input offset current i os 2,3 -20 +20 na 1 -10 +10 power supply rejection ratio +psrr -v cc = -34v dc, +v cc = +10 v to +40 v dc v/v 2,3 -20 +20 1 -10 +10 -psrr +v cc = +34v dc, -v cc = -10 v to -40 v dc v/v 2,3 -20 +20 1 95 common mode rejection ratio cmrr v cm = 22 v dc, f = dc db 2,3 90 supply currents i cc v cm = 0 v, no load condition 1,2,3 -30 +30 ma output voltage peak v op i o = 5 a peak, r l = 5.6 ? , 4 28.0 v 10 khz sine wave, t a = +25c r l = 10 ? , 5,6 30 10 khz sine wave, t a = -55c and +125c r l = 5.6 ? , v out = 28 v, t a = +25c 2/ 4 5 output current peak i op r l = 10 ? , v out = 30 v t a = -55c and +125c 2/ 3/ 5,6 3 a 4 95 voltage gain a vs r l = 10 k ? 5,6 86 db slew rate sr r l = 10.0 ? , t a = +25c 7 6 v/s 1 -55c ta +125c, vcc = 34 v dc unless otherwise specified 2 internal current limit circuitry is controlled by a single external resistor, rcl. to calculate the value of the current limit resistor, use rcl= (0.809/ilim) - 0.057, where ilimis equal to the desired output current (iop). 3 test can be performed using rl= 10 k ? with a minimum limit of 3 ma.
sensitron semiconductor technical data ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? SEN-0541 *other packages are available. please consult factory. disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change wi thout prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety shoul d be ensured by using semiconduc tor devices that feature assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconduc tor be liable for any failure in a semic onductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any th ird party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any fo rm, in whole or part, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any thir d party. when exporting these products (t echnologies), the necessary procedur es are to be taken in accordance with related laws and regulatio ns.
|
