phlatlight ? pt39 projection chipset summary data sheet ? 2010 luminus devices, inc. - all rights reserved updated 3/1/10 pds-001024 rev 08 technology overview luminus devices? projection tech nology is an innovative solid- state light source created to replace arc lamps in projection systems. enabled by unique use of photonic lattice technolo- gy, phlatlight chipsets represent a major breakthrough in brightness that delivers all th e benefits of solid state light sources in projections applications: - wide color gamut for vivid colors, exceeds ntsc. - instant turn-on, no more wait time. - high reliability; no lamp replacement - environmentally friendly technology - mercury-free. - electronic control of color points and light intensity on a frame by frame basis phlatlight products benefit fr om numerous innovations in the domain of packaging, therma l management and optical cou- pling that allow designers to achieve efficient light engine de- signs and deliver high screen brightness. collimated angular in tensity distribution features ? matched rgb chipset with 3.9mm 2 emitting area designed for small projector applications ? photonic lattice technology for very high surface brightness ? 100% surface emission for high collection efficiency and low optical losses ? wide color gamut: red 623 nm, green 526 nm, blue 462 and ep blue 460 nm typical dominant wavelength ? single emitting area per color a llows for collection with sin- gle lens for si mplified optics ? aspect ratio compatible with 4:3 micro-displays ? over 1120 emitted white lumens at 8000k color temperature from single chipset under continuous wave operation ? over 725 emitted white lumens at 8000k color temperature from single chipset under pulsed (time-sequential)operation ? uniform surface emission ? thermally efficient type cx (lowest thermal resistance, common anode) ? rohs (lead-free) compliant applications ? specifically engineered for pock et-size, ultra portable front projectors, head-up projection displays ? optimized for micro-display diag onal sizes ranging from 0.4? to 0.55? with 4:3 aspect ratio. ? suitable for dlp? (0.45? an d 0.55? svga), lcos and htps/ 3lcd microdisplays
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 2 optical and electrical characteristics symbol red green blue ep-blue 1 preliminary unit bin kit mpb mpb mpb epa emitting area 3.9 3.9 3.9 3.9 mm 2 emitting area dimensions 2.09x1.87 2.09x1.87 2.09x1.87 2.09x1.87 mm x mm characteristics at recommended pulsed drive current i f 2,3 reference duty cycle 4 25 50 25 25 % recommended peak drive current 5 typ i f 9.8 9.8 9.8 9.8 a peak luminous flux 6 typ v 540 1100 190 215 lm peak radiometric power typ r 3.1 2.3 3.9 5.1 w dominant wavelength min dmin 619 516 455 450 nm typ d 623 525 462 460 nm max dmax 630 535 469 468 nm fwhm - spectral band width at 50% of v typ ? d 19 38 20 20 nm color saturation 7,8 typ 1.00 0.77 0.99 0.99 chromaticity coordinates 7,8 typ x 0.697 0.171 0.144 0.154 typ y 0.303 0.702 0.040 0.024 forward voltage min v fmin 2.2 3.5 3.5 3.2 v typ v f 2.6 4.9 4.9 4.0 v max v fmax 3.4 5.9 5.9 5.2 v dynamic resistance typ dyn 0.07 0.08 0.07 0.05 device thermal characteristics and lifetime thermal coefficient of photometric flux typ -0.9 -0.2 ~0 ~0 % / oc thermal coefficient of radiometri c power typ -0.5 -0.2 -0.2 -0.2 % / oc temperature coefficient of forward voltage typ -1.5 -1.0 -3.0 -3.0 mv / oc median lifetime 9 >60,000 >60,000 >60,000 >60,000 hours
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 3 bin kit mpb mpb mpb epa a characteristics at reference continuous drive current i f (continuous wave) 2 reference drive current typ i f 5.9 5.9 5.9 5.9 a luminous flux typ v 305 770 140 155 lm radiometric power typ r 1.7 1.5 2.5 3.4 w dominant wavelength typ d 624 528 464 462 nm fwhm - spectral band width at 50% of v typ ? d 18 38 21 21 nm color saturation 7,8 typ 1.00 0.84 0.99 0.99 chromaticity coordinates 7,8 typ x 0.698 0.183 0.141 0.153 typ y 0.301 0.703 0.044 0.025 forward voltage min v fmin 2.0 3.1 3.1 2.8 v typ v f 2.3 4.4 4.4 3.6 v max v fmax 3.2 5.3 5.3 4.6 v dynamic resistance typ dyn 0.08 0.12 0.07 0.05 note 1: ep-blue is recommended fo r new designs. please see page 9 for part ordering numbers. note 2: all ratings are based on operation with a constant heat sink temperature t hs = 40oc. see thermal resistance section for t hs defini- tion. note 3: parameters rated at typical duty cy cle and pulsed operation frequency f>240hz; note 4: duty cycle used to specify device ratings under pulsed operation. phlatlight devices can operate at duty cycles ranging from 1% to 100%. at higher duty cycles, drive current sh ould be adjusted to maintain the junction temperature at desire d levels to meet th e application lifetime requirements. note 5: in pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds note 6: for blue and ep-blue devices, total flux from emitting area at typical dominant wavelength. note 7: in cie 1931 chromaticity diagram coordinates, normalized to x+y+z=1 note 8: for reference only note 9: estimated median lifetime, assuming tj<80oc for red devices , tj<115oc for blue devices and tj<125oc for green devices optical and electrical characteristics symbol red green blue ep-blue 1 preliminary unit dc t t -- - = t t
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 4 absolute maximum ratings symbol red green blue ep-blue unit maximum current 1 max 12121212a absolute maximum junction temperature 2 max t jmax 110 170 170 170 oc storage temperature range -40/+100 -40/+100 -40/+100 -40/+100 oc note 1: luminus phlatlight leds are designed for operation to an absolute maximum forward drive current density of 2.5a/mm2 cw, and 3a/ mm2 pulsed (f>240hz, duty cycle < 60%). plea se refer to absolute maximum rating tabl e above for specific absolute maximum cur- rents for the products cove red in this datasheet. product lifetime data is specified at recommended forward driv e currents. sustained operation at absolute maximum currents wil l result in a reduction of device lifetime compared to recommen ded forward drive currents. actual device lifetimes will also depe nd on junction temperature. refer to the lifeti me derating curves for further information. in pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds. note 2: sustained operation above maxi mum operating junction temperature (t jmax ) will result in redu ced device life time.
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 5 luminous flux variation with wavelength: v = f ( d ) at recommended operating current i f see note 1 on page 6. luminous flux variation with drive current - v = f (i f ) - typical see notes 1,2 on page 6. dominant wavelength variat ion with forward current - d = f(i f ) - typical. see notes 1,2 on page 6. 0 100 200 300 400 500 600 700 615 620 625 630 d (nm) v (lm) 0 200 400 600 800 1000 1200 1400 515 520 525 530 535 d (nm) v (lm) 0 50 100 150 200 250 300 456 458 460 462 464 466 468 470 d (nm) v (lm) epa-blue mpb-blue 0 200 400 600 800 1000 1200 1400 24681012 i f (a) v (lm) 0 50 100 150 200 250 24681012 i f (a) v (lm) epa-blue mpb-blue 0 100 200 300 400 500 600 700 2 4 6 8 10 12 i f (a) v (lm) 620 622 624 626 628 630 24681012 i f (a) d (nm) 520 525 530 535 540 24681012 i f (a) d (nm) 452 454 456 458 460 462 464 466 468 24681012 i f (a) d (nm) epa-blue mpb-blue
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 6 forward voltage variation with drive current - v f = f(i f ) - typical optical spectrum (typical) see note 3 on page 6. chart notes note 1: for pulsed operation, ty pical rgb duty cycles used are 25%, 50% and 25% respectively (t hs = 40 o c). note 2: yellow square indicate device operating point unde r recommended conditions listed in the optical and electrical char- acteristics table. note 3: typical spectrum at re commended peak drive current. 0 1 2 3 4 5 6 24681012 i f (a) v f (v) 0 0.5 1 1.5 2 2.5 3 3.5 24681012 i f (a) v f (v) 0 1 2 3 4 5 6 24681012 i f (a) v f (v) epa-blue mpb-blue 0 0.2 0.4 0.6 0.8 1 1.2 400 450 500 550 600 650 700 wavelength (nm) normalized radiometric power
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 7 thermal resistance thermistor information the thermistor used in phlatlight devices mounted on core-board s is from murata manufacturing co. the global part number is ncp15xh103j03rc. please see http://www.murata.com/ or http:// www.murata.co.jp for details on calculating thermistor tempera- ture. t hs definition = 3 mm from core-board window copper core-board t j t b t hs t a t ref window frame thermistor die junction thermal interface material heat sink window copper core-board t j t b t hs t a t ref window frame thermistor die junction thermal interface material heat sink typical thermal resistance r j-b 1 note 1: thermal resistance val- ues are based on finite element analysis model results correlated to measured r j-hs data . 1.6 o c/w r b-hs 2 note 2: thermal resistance is based on egraph 1205 thermal interface. 0.2 o c/w r j-hs 1,2 1.8 o c/w r j-ref 2 1.6 o c/w
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 8 mechanical dimensions (standard die configuration) 12.0 10.50 2x 1.7 1.6 alignment holes 26.5 0.5 1.87 emitting area 16.0 0.5 2.09 emitting area 2x 2.4 0.1 fastener holes a a pin 1 red device blue device green device 6.3 1.6 .063 b section a-a "c" "b" "a" detail b dimensions in millimeters dimension name description nominal dimension tolerance "a" top of metal substrate to top of glass 0.94 0.13 "b" emitting area to top of glass 0.67 0.16 "c" top of metal substrate to emitting area 0.27 0.05 pin # function 1 thermistor (+) 2 thermistor (-) 3-5 power (-) 6-8 power (+) dwg-001263 ? red, green and blue pt39 phlatlight leds are individually assembled into a type cx, common anode copper core- board with a footprint of 26.5 mm x 16 mm. ? dimension above for information only. for detailed dimensions, always refer to the latest revision of the dwg- 001263 package outline ? connector: molex. part number: 874380843. plea se refer to dwg-001263 fo r pin-out information
pt39 - summary datasheet - revision 08 ? 2010 luminus devices, in c. - all rights reserved page 9 ordering information the products, their specifications and other information appearing in this document ar e subject to change by luminus devices wi thout notice. luminus devices assumes no liability for errors that may appear in this document, and no liability othe rwise arising from the applicati on or use of the product or information contained herein. none of the information provided herein sh ould be considered to be a representation of the fit ness or suitability of the product for any particular application or as any other form of warranty. luminus devices? product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. nothing herein is to be construed as constituting an additio nal warranty. no infor- mation contained in this publication may be considered as a waiv er by luminus devices of any intellectual property rights that luminus devices may have in such information. phlatlight ? is a registered trademark of luminus devices, inc., all rights reserved. this product is protected by u.s. patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,87 0; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391, 059 patents pending in the u.s. and other countries www.luminus.com customer part number die configuration color description pt-39-r-c21-mpb standard red bin kit mpb red phlatlight pt 39 consisting of a 3.9 mm 2 led, thermistor and connector mounted on a type cx copper-core pcb pt-39-g-c21-mpb green bin kit mpb green phlatlight pt39 consisting of a 3.9 mm 2 led, thermistor and connector mounted on a type cx copper-core pcb pt-39-b-c21-mpb blue 1 note 1: not recommen ded for new designs bin kit mpb blue phlatlight pt39 consisting of a 3.9 mm 2 led, thermistor and connector mounted on a type cx copper-core pcb PT-39-B-C21-EPA ep-blue 2 note 2: bin kit epa is recommended for new designs. bin kit epa blue phlatlight pt39 consisting of a 3.9 mm 2 led, thermistor and connector mounted on a type cx copper-core pcb
|
