1 d a t a s h e e t : c l d - c t 1 1 3 5 . 0 0 1 cree ? p4 led CP43B-RGS/ags data sheet this revolutionary package design allows the lighting designer to reduce the number of leds required and provide a more uniform and unique illuminated appearance than with other led solutions. this is possible through the effcient optical package design and high current capabilities. the low profle package can be easily coupled with refectors or lenses to effciently distribute light and provide the desired lit appearance. this product family employs green and blue led materials, which allow designers to match the color of many lighting applications like vehicle signal lamps and amusement lighting. features ? size (mm): 7.6 x 7.6 ? color and typical dominant wavelength (nm): red (624) amber (591) ? luminous intensity (mcd) red (2130 - 8200) amber (2130 - 8200) ? lead-free ? rohs compliant applications ? channel letter ? amusement subject to change without notice. www.cree.com/ledlamps
2 cld-ct1135.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit red/amber forward current i f 70 note1 ma peak forward current note2 i fp 200 ma reverse voltage v r 5 v power dissipation p d 210 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max. 260c for 5 sec. max. (3 mm from the base of the epoxy bulb) electrostatic discharge classifcation (mil-std-883e) esd class 2 note: 1. a heat sink is recommended if the device is operated at ambient temperatures higher than 25c. 2. pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics color symbol condition unit minimum typical maximum forward voltage red/amber v f i f = 70 ma v 2.5 3.0 reverse current red/amber i r v r = 5 v a 100 dominant wavelength red d i f = 70 ma nm 618 624 630 amber d i f = 70 ma nm 584 591 599 luminous intensity red i v i f = 70 ma mcd 2130 4500 amber i v i f = 70 ma mcd 2130 5000 50% power angle red/amber 2?h-h i f = 70 ma deg 90 red/amber 2?v-v i f = 70 ma deg 35
3 cld-ct1135.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. intensity bin limit (i f = 70 ma) ? tolerance of measurement of luminous intensity is 15% color bin limit (i f = 70 ma) vf bin limit (i f = 70 ma) ? tolerance of measurement of dominant wavelength is 1 nm red bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 amber bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 ? tolerance of measurement of vf is 0.05v amber bin code min.(nm) max.(nm) a2 584 587 a3 587 590 a4 590 593 a5 593 596 a6 596 599 red bin code min.(nm) max.(nm) ra 618 630 red bin code min.(mcd) max.(mcd) v0 2130 3000 w0 3000 4180 x0 4180 5860 y0 5860 8200 amber bin code min.(mcd) max.(mcd) v0 2130 3000 w0 3000 4180 x0 4180 5860 y0 5860 8200
5 cld-ct1135.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice. ????????????????????????????????????? ?????? ??????????????? ?????? ????? ??????? ??? ??? ??? ??? ??? ??? ?? ?? ?? ??? ?? ? ? ?? ?? ?? ??? ?? ?? ?? ?? ?? ??? ? ???????? ??? ????? ?????????????????????????????????? ???????????????????????? ?????????????????????????? ????????????????????? ????????????????????????????????? ???????????????????????? ????????????????????????????????????? ??????????? ??? ??? ??? ??? ??? ??? ???? ???? ???? ???? ????? ??? ??? ????? ??? ??? ????? ??? ??? ??? ??? ?????? ??? ??? ??? ??? ? ??? ????????????????????????????? ?????? ??? ??? ??? ??? ?? ???? ??? ??? ??? ??? ??? ??? ??? ????? ??? ??? ??? ? ? ? ??? ??? ?? ?? ?? ???????????????????????? ????? ?????? ??? ??? ????????????????????????????? ????????????????????????????? ????????????????????????? ???????????????? ?
6 cld-ct1135.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentr ation values (also referred to as the threshold limits) permitted for such substances, or are used in an ex empted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. ?
8 cld-ct1135.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. package features: ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shock during transportation. ? the boxes are not water resistant, and they must be kept away from water and moisture. ? the tube pack type of packaging. ? max 60 pcs per tube. h u e xx ax xxx xxx xx x x c o l o r l e d l a mp j o w axxxxx - xx - xxx l xxxx x xxx - xxx l ot t ype xxx xxx vf xx iv x r a nk q t y p cs r r
|
