View 704-030518_830653.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

switches and indicators 14 1 4
switches and indicators 330 01.2000 series 14 description product assembly product range - pushbuttons for standard mounting - pushbuttons for flush mounting - accessories / spare parts technical data technical drawing / dimension / layout circuit drawing typical applications marking page 331 page 332 page 353 page 355 page 364 page 365 page 366 page 333 page 340 page 345 index
description 14 331 01.2000 1 4 general notes the illuminated pushbuttons with 1 metre immesion prooffront (ip 67) combine the robust actuators of series 04 with gold plated silver snap-action, low-level switching elements silver contacts for switch- ing elements 2.8 mm plug-in terminals can be supplied on request for 1 changeover only. the range includes pushbuttons, keylock switches and selector switches. mounting mounting from the front through the mounting hole either 22.5 mm di- ameter for raised or 30.5 mm diameter for flush. the pushbuttons are screwed to the panel by means of a front ring and prevented from twisting by two screws. to ensure correct positioning of the pushbuttons we can provide a positioning insert on request. the universal terminals of the low-level switching elements permit them to be mounted on printed circuit boards (pcb). these terminals are also suitable for dip soldering. for these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. lenses the flat lenses, made of polyamide, are available in various colours, as well as translucent or transparent. marking for engravings, hot stamping and film inserts, see marking on page 366. illumination perfect illumination of the different coloured lenses is assured by lamps t 5,5 (6-60 v). for supply voltages above 60 v, it is necessary to use a voltage re- duction element (external series resistor, capacitor or transformer). do not solder the terminals directly, because of the high surface tem- perature. multi-leds t 5,5 (6, 12, 24, 48 v) are available in the colours white, red, yellow and green. position indicating when a switch with maintained action is actuated, the lens remains in the depressed position mechanically. the state of the switch is ap- parent at all times from the position of the lens. all dimensions in mm. we reserve the right to modify technical data. keylock switches safety lock (index k). single locks (2 positions). 10 different locks with standard numbers 1001-1010. if the lock number is not specified, we will supply no. 1001. an additional 690 locks with numbers 1011-1700 are available on request. for numbers 1001-1700 no master key can be supplied. two keys are supplied with each keylock switch. spare keys for kaba safety locks may be ordered by quoting no. 14-987 (please state the lock number). combined locking systems information supplied on request. number structure 14-xxx.0xx kind of terminals contact material switch variant example: -illuminated pushbutton; momentary action, gold-plated silver contact; soldering terminals;1 switching element 14-131.025 -lens red, transparent 704.602.2 -front ring; aluminium, natural anodized 704.600.1 -marking plate; white, translucent 704.609.9 specimen order indicator front illumination - indicator front illumination, soldering terminal 14-040.005 recommended accessories: - lens plastic, opaque black 704.6020 - marking foil for lens plastic/metal black704.609.0 - frontring, aluminium black 704.6020 - led. 1 chip, 12 vdc, white 10-2109.3139
product assembly 14 332 01.2000 illuminated-/pushbutton 1 front ring 2 lens 3 marking plate 4 switch housing 5 fixing nut pushbutton-/illuminated pushbutton for flush mounting 1 front bezel bracket for flush mounting 2 lens 3 marking plate 4 switch housing 5 front panel 6 pressure ring 7 fixing nut
pushbuttons for standard mounting 14 333 01.2000 1 4 recommended accessories: d lens plastic ? 345 d marking foil for lens plastic/metal ? 346 d front ring ? 347 d incandescent lamp ? 350; led ? 350 connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 recommended accessories: d lens cap for indicator full face illumination ? 346 d marking cap for lens cap for indicator full face illumination ? 347 d incandescent lamp ? 350; led ? 350 connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 indicator front illumination connection method 29 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e indicator front illumination st/ pt 14-040.002 2 1 1 - 0,050 st 14-040.005 2 1 1 - 0,050 ut 14-041.006 1 1 1 1 0,050 indicator full face illumination diodes connection method 29 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e indicator full face illumination -st/ pt 14-030.002 2 1 1 - 0,010 st 14-030.005 2 1 1 - 0,010 ut 14-031.006 1 1 1 1 0,011 1ut 14-741.006 3 2 1 1 0,011 2ut 14-742.006 4 2 1 1 0,011
pushbuttons for standard mounting 14 334 01.2000 recommended accessories: d lens plastic ? 345; lens metal ? 345 d marking foil for lens plastic/metal ? 346 d lens raised, plastic ? 345 d marking cap for lens raised plastic/metal ? 346 d front ring ? 347 d incandescent lamp ? 350; led ? 350 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 illuminated-/pushbutton front illumination switching system contacts diode (1n 4007) switching action connection method 29 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e illuminated-/pushbutton front illumination ll 1nc - main ut 14-476.036 13 5 1 1 0,015 mom ut 14-436.036 26 5 1 1 0,015 1nc + 1no - main ut 14-473.036 16 5 1 1 0,015 mom ut 14-433.036 29 5 1 1 0,015 1no - main ut 14-475.036 15 5 1 1 0,015 mom ut 14-435.036 28 5 1 1 0,015 2nc - main ut 14-472.036 14 5 1 1 0,015 mom ut 14-432.036 27 5 1 1 0,015 2no - main ut 14-471.036 17 5 1 1 0,015 mom ut 14-431.036 30 5 1 1 0,015 sa 1nc + 1no - main st/ pt 14-271.022 12 3 1 - 0,013 st 14-271.025 12 3 1 - 0,013 mom st/ pt 14-131.022 25 3 1 - 0,013 st 14-131.025 25 3 1 - 0,013 1 main ut 14-747.029 10 4 1 1 0,014 mom ut 14-743.029 23 4 1 1 0,014 2 main ut 14-748.029 11 4 1 1 0,014 mom ut 14-744.029 24 4 1 1 0,014 2nc + 2no - main st 14-272.025 9 3 1 - 0,015 mom st 14-132.025 22 3 1 - 0,015 1 main ut 14-749.029 7 4 1 1 0,016 mom ut 14-745.029 20 4 1 1 0,016 2 main ut 14-750.029 8 4 1 1 0,016 mom ut 14-746.029 21 4 1 1 0,016 3nc + 3no - main st 14-273.025 6 3 1 - 0,017 mom st 14-133.025 19 3 1 - 0,017 4nc + 4no - main st 14-274.025 5 3 1 - 0,019 mom st 14-134.025 18 3 1 - 0,019
pushbuttons for standard mounting 14 335 01.2000 1 4 recommended accessories: d mushroom-head cap ? 346 d marking plate for mushroom-head cap ? 346 d front ring ? 347 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 pushbutton with mushroom-head cap switching system contacts switching action connection method 40 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e pushbutton with mushroom-head cap ll 1nc main ut 14-476.036 13 7 2 1 0,015 mom ut 14-436.036 26 7 2 1 0,015 1nc + 1no main ut 14-473.036 16 7 2 1 0,015 mom ut 14-433.036 29 7 2 1 0,015 1no main ut 14-475.036 15 7 2 1 0,015 mom ut 14-435.036 28 7 2 1 0,015 2nc main ut 14-472.036 14 7 2 1 0,015 mom ut 14-432.036 27 7 2 1 0,015 2no main ut 14-471.036 17 7 2 1 0,015 mom ut 14-431.036 30 7 2 1 0,015 sa 1nc + 1no main st/ pt 14-271.022 12 6 2 - 0,013 st 14-271.025 12 6 2 - 0,013 mom st/ pt 14-131.022 25 6 2 - 0,013 st 14-131.025 25 6 2 - 0,013 2nc + 2no main st 14-272.025 9 6 2 - 0,015 mom st 14-132.025 22 6 2 - 0,015 3nc + 3no main st 14-273.025 6 6 2 - 0,017 mom st 14-133.025 19 6 2 - 0,017 4nc + 4no main st 14-274.025 5 6 2 - 0,019 mom st 14-134.025 18 6 2 - 0,019
pushbuttons for standard mounting 14 336 01.2000 recommended accessories: d mushroom-head cap illuminated ? 346 d marking plate for mushroom-head cap ? 346 d front ring ? 347 d incandescent lamp ? 350; led ? 350 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 illuminated pushbutton with mushroom-head cap switching system contacts diode (1n 4007) switching action connection method 40 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e illuminated pushbutton with mushroom-head cap ll 1nc - main ut 14-476.036 18 7 2 1 0,015 mom ut 14-436.036 19 7 2 1 0,015 1nc + 1no - main ut 14-473.036 9 7 2 1 0,015 mom ut 14-433.036 12 7 2 1 0,015 1no - main ut 14-475.036 22 7 2 1 0,015 mom ut 14-435.036 25 7 2 1 0,015 2nc - main ut 14-472.036 12 7 2 1 0,015 mom ut 14-432.036 25 7 2 1 0,015 2no - main ut 14-471.036 5 7 2 1 0,015 mom ut 14-431.036 6 7 2 1 0,015 sa 1nc + 1no - main st/ pt 14-271.022 27 6 2 - 0,013 st 14-271.025 26 6 2 - 0,013 mom st/ pt 14-131.022 30 6 2 - 0,013 st 14-131.025 28 6 2 - 0,013 1 main ut 14-747.029 10 8 2 1 0,014 mom ut 14-743.029 23 8 2 1 0,014 2 main ut 14-748.029 11 8 2 1 0,014 mom ut 14-744.029 24 8 2 1 0,014 2nc + 2no - main st 14-272.025 15 6 2 - 0,015 mom st 14-132.025 27 6 2 - 0,015 1 main ut 14-749.029 7 8 2 1 0,016 mom ut 14-745.029 20 8 2 1 0,016 2 main ut 14-750.029 8 8 2 1 0,016 mom ut 14-746.029 21 8 2 1 0,016 3nc + 3no - main st 14-273.025 13 6 2 - 0,017 mom st 14-133.025 17 6 2 - 0,017 4nc + 4no - main st 14-274.025 16 6 2 - 0,019 mom st 14-134.025 14 6 2 - 0,019
pushbuttons for standard mounting 14 337 01.2000 1 4 recommended accessories: - switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open keylock switches are supplied with 2 keys. description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 keylock switch 2 positions switching system contacts switching action connection method key removable in 29 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e keylock switch 2 positions pos. a: basic position pos. c: maintaining position standard lock 1001, other lock numbers on request ll 1nc + 1no main ut a 14-415.036k 41 10 1 1 0,030 a+c 14-412.036k 41 10 1 1 0,030 c 14-418.036k 41 10 1 1 0,030 2no main ut a 14-414.036k 42 10 1 1 0,030 a+c 14-411.036k 42 10 1 1 0,030 c 14-417.036k 42 10 1 1 0,030 sa 1nc + 1no main st/ pt a 14-235.022k 37 9 1 - 0,029 a+c 14-135.022k 37 9 1 - 0,029 c 14-335.022k 37 9 1 - 0,029 st a 14-235.025k 37 9 1 - 0,029 a+c 14-135.025k 43 9 1 - 0,029 c 14-335.025k 37 9 1 - 0,029 2nc + 2no main st a 14-236.025k 38 9 1 - 0,031 a+c 14-136.025k 38 9 1 - 0,031 c 14-336.025k 38 9 1 - 0,031 3nc + 3no main st a 14-237.025k 39 9 1 - 0,033 a+c 14-137.025k 39 9 1 - 0,033 c 14-337.025k 39 9 1 - 0,033 4nc + 4no main st a 14-238.025k 40 9 1 - 0,035 a+c 14-138.025k 40 9 1 - 0,035 c 14-338.025k 40 9 1 - 0,035 pos. a: basic position pos. c: momentary position standard lock1001, other lock numbers on request ll 1nc + 1no mom ut a 14-438.036k 35 10 1 1 0,030 2no mom ut a 14-437.036k 36 10 1 1 0,030 sa 1nc + 1no mom st/ pt a 14-141.022k 31 9 1 - 0,029 st a 14-141.025k 31 9 1 - 0,029 2nc + 2no mom st a 14-142.025k 32 9 1 - 0,031 3nc + 3no mom st a 14-143.025k 33 9 1 - 0,033 4nc + 4no mom st a 14-144.025k 34 9 1 - 0,035 maint. 90? c mom. 42? c aa
pushbuttons for standard mounting 14 338 01.2000 recommended accessories: - switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 selector switch 2 positions lever switching system contacts switching action connection method 29 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e selector switch 2 positions pos. a: basic position long, black ll 1nc + 1no main ut 14-572.0360 56 12 3 1 0,025 mom ut 14-567.0360 49 12 3 1 0,025 2nc main ut 14-571.0360 55 12 3 1 0,025 mom ut 14-566.0360 48 12 3 1 0,025 2no main ut 14-570.0360 57 12 3 1 0,025 mom ut 14-565.0360 50 12 3 1 0,025 sa 1nc + 1no main st/ pt 14-556.0220 51 11 3 - 0,024 st 14-556.0250 51 11 3 - 0,024 mom pt 14-551.0220 44 11 3 - 0,024 st 14-551.0250 44 11 3 - 0,024 2nc + 2no main st 14-557.0250 52 11 3 - 0,026 mom st 14-552.0250 45 11 3 - 0,026 3nc + 3no main st 14-558.0250 53 11 3 - 0,028 mom st 14-553.0250 46 11 3 - 0,028 4nc + 4no main st 14-559.0250 54 11 3 - 0,030 mom st 14-554.0250 47 11 3 - 0,030 short, black ll 1nc + 1no main ut 14-522.0360 56 14 1 1 0,025 mom ut 14-517.0360 49 14 1 1 0,025 2nc main ut 14-521.0360 55 14 1 1 0,025 mom ut 14-516.0360 48 14 1 1 0,025 2no main ut 14-520.0360 57 14 1 1 0,025 mom ut 14-515.0360 50 14 1 1 0,025 sa 1nc + 1no main st/ pt 14-506.0220 51 13 1 - 0,024 st 14-506.0250 51 13 1 - 0,024 mom st/ pt 14-501.0220 44 13 1 - 0,024 st 14-501.0250 44 13 1 - 0,024 2nc + 2no main st 14-507.0250 52 13 1 - 0,026 mom st 14-502.0250 45 13 1 - 0,026 3nc + 3no main st 14-508.0250 53 13 1 - 0,028 mom st 14-503.0250 46 13 1 - 0,028 4nc + 4no main st 14-509.0250 54 13 1 - 0,030 mom st 14-504.0250 47 13 1 - 0,030 maint. 90? c mom. 42? c aa
pushbuttons for standard mounting 14 339 01.2000 1 4 recommended accessories: - connection method: st = soldering terminal; pt = plug-in terminal; pcb plug-in base page 349 technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364 buzzer operation voltage front cap connection method 29 mm dia. part no. circuit drawing technical drawing mounting dimension e buzzer 24 vdc brass chromium-plated st/ pt 14-810.902 58 15 1 0,016 plastic, black st/ pt 14-810.002 58 15 1 0,016
pushbuttons for flush mounting 14 340 01.2000 recommended accessories: d lens plastic ? 345 d marking foil for lens plastic/metal ? 346 d front bezel-set for flush mounting ? 347 d incandescent lamp ? 350; led ? 350 connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 indicator for flush mounting connection method 35 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e indicator for flush mounting st/ pt 14-040.002 2 16 4 - 0,050 st 14-040.005 2 16 4 - 0,050 ut 14-041.006 2 16 4 1 0,050
pushbuttons for flush mounting 14 341 01.2000 1 4 recommended accessories: d lens plastic ? 345; lens metal ? 345 d marking foil for lens plastic/metal ? 346 d lens raised, plastic ? 345 d marking cap for lens raised plastic/metal ? 346 d front bezel-set for flush mounting ? 347 d incandescent lamp ? 350; led ? 350 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 illuminated-/pushbutton for flush mounting switching system contacts diode (1n 4007) switching action connection method 35 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e illuminated-/pushbutton for flush mounting ll 1nc - main ut 14-476.036 13 18 4 1 0,015 mom ut 14-436.036 26 18 4 1 0,015 1nc + 1no - main ut 14-473.036 16 18 4 1 0,015 mom ut 14-433.036 29 18 4 1 0,015 1no - main ut 14-475.036 15 18 4 1 0,015 mom ut 14-435.036 28 18 4 1 0,015 2nc - main ut 14-472.036 14 18 4 1 0,015 mom ut 14-432.036 27 18 4 1 0,015 2no - main ut 14-471.036 17 18 4 1 0,015 mom ut 14-431.036 30 18 4 1 0,015 sa 1nc + 1no - main st/ pt 14-271.022 12 18 4 - 0,013 st 14-271.025 12 18 4 - 0,013 mom st/ pt 14-131.022 25 18 4 - 0,013 st 14-131.025 25 18 4 - 0,013 1mainut 14-747.029 10 17 4 1 0,014 mom ut 14-743.029 23 17 4 1 0,014 2mainut 14-748.029 11 17 4 1 0,014 mom ut 14-744.029 24 17 4 1 0,014 2nc + 2no - main st 14-272.025 9 18 4 - 0,015 mom st 14-132.025 22 18 4 - 0,015 1mainut 14-749.029 7 17 4 1 0,016 mom ut 14-745.029 20 17 4 1 0,016 2mainut 14-750.029 8 17 4 1 0,016 mom ut 14-746.029 21 17 4 1 0,016 3nc + 3no - main st 14-273.025 6 18 4 - 0,017 mom st 14-133.025 19 18 4 - 0,017 4nc + 4no - main st 14-274.025 5 18 4 - 0,019 mom st 14-134.025 18 18 4 - 0,019
pushbuttons for flush mounting 14 342 01.2000 recommended accessories: d front bezel-set for flush mounting ? 347 d anti-twisting ring ? 352 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 keylock switch 2 positions for flush mounting switching system contacts switching action connection method key removable in 35 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e keylock switch 2 positions for flush mounting pos. a: basic position pos. c: maintaining position standard lock 1001, other lock numbers on request ll 1nc + 1no main ut a 14-415.036k 41 19 4 1 0,030 a+c 14-412.036k 41 19 4 1 0,030 c 14-418.036k 41 19 4 1 0,030 2no main ut a 14-414.036k 42 19 4 1 0,030 a+c 14-411.036k 42 19 4 1 0,030 c 14-417.036k 42 19 4 1 0,030 sa 1nc + 1no main st/ pt a 14-235.022k 37 19 4 - 0,029 a+c 14-135.022k 37 19 4 - 0,029 c 14-335.022k 37 19 4 - 0,029 st a 14-235.025k 37 19 4 - 0,029 a+c 14-135.025k 37 19 4 - 0,029 c 14-335.025k 37 19 4 - 0,029 2nc + 2no main st a 14-236.025k 38 19 4 - 0,031 a+c 14-136.025k 38 19 4 - 0,031 c 14-336.025k 38 19 4 - 0,031 3nc + 3no main st a 14-237.025k 39 19 4 - 0,033 a+c 14-137.025k 39 19 4 - 0,033 c 14-337.025k 39 19 4 - 0,033 4nc + 4no main st a 14-238.025k 40 19 4 - 0,035 a+c 14-138.025k 40 19 4 - 0,035 c 14-338.025k 40 19 4 - 0,035 pos. a: basic position pos. c: momentary position standard lock1001, other lock numbers on request ll 1nc + 1no mom ut a 14-438.036k 35 19 4 1 0,030 2no mom ut a 14-437.036k 36 19 4 1 0,030 sa 1nc + 1no mom st/ pt a 14-141.022k 31 19 4 - 0,029 st a 14-141.025k 31 19 4 - 0,029 2nc + 2no mom st a 14-142.025k 32 19 4 - 0,031 3nc + 3no mom st a 14-143.025k 33 19 4 - 0,033 4nc + 4no mom st a 14-144.025k 34 19 4 - 0,035 maint. 90? c mom. 42? c aa
pushbuttons for flush mounting 14 343 01.2000 1 4 recommended accessories: d front bezel-set for flush mounting ? 347 d anti-twisting ring ? 352 switching system: ll = low level switching element, sa = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: st = soldering terminal; pt = plug-in terminal; ut = universal terminal; pcb plug-in base page 349 contacts: nc = normally closed, no = normally open technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 selector switch 2 positions for flush mounting lever switching system contacts switching action connection method 35 mm dia. part no. circuit drawing technical drawing mounting dimension components layout e selector switch 2 positions for flush mounting pos. a: basic position short, black ll 1nc + 1no main ut 14-522.0360 56 20 4 1 0,025 mom ut 14-517.0360 49 20 4 1 0,025 2nc main ut 14-521.0360 55 20 4 1 0,025 mom ut 14-516.0360 48 20 4 1 0,025 2no main ut 14-520.0360 57 20 4 1 0,025 mom ut 14-515.0360 50 20 4 1 0,025 sa 1nc + 1no main st/ pt 14-506.0220 51 20 4 - 0,024 st 14-506.0250 51 20 4 - 0,024 mom st/ pt 14-501.0220 44 20 4 - 0,024 st 14-501.0250 44 20 4 - 0,024 2nc + 2no main st 14-507.0250 52 20 4 - 0,026 mom st 14-502.0250 45 20 4 - 0,026 3nc + 3no main st 14-508.0250 53 20 4 - 0,028 mom st 14-503.0250 46 20 4 - 0,028 4nc + 4no main st 14-509.0250 54 20 4 - 0,030 mom st 14-504.0250 47 20 4 - 0,030 maint. 90? c mom. 42? c aa
pushbuttons for flush mounting 14 344 01.2000 recommended accessories: - connection method: st = soldering terminal; pt = plug-in terminal; pcb plug-in base page 349 technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364 buzzer for flush mounting operation voltage front cap connection method 35 mm dia. part no. circuit drawing technical drawing mounting dimension e buzzer for flush mounting 24 vdc brass chromium-plated st/ pt 14-810.918 58 21 4 0,016 plastic, black st/ pt 14-810.910 58 21 4 0,016
accessories 14 345 01.2000 1 4 for version ip 67 use marking plate 704.609.9 marking see page 366 for version ip 67 use marking cap 704.610.9 marking see page 366 for version ip 67 use marking plate 704.609.9 marking see page 366 for version ip 67 use marking plate 704.609.9 marking see page 366 at front lens plastic shape lens colour 29 mm dia. part no. e lens plastic flat opaque black 704.602.0 0,001 transparent blue 704.602.6 0,001 colourless, clear 704.602.7 0,001 green 704.602.5 0,001 red 704.602.2 0,001 yellow 704.602.4 0,001 lens raised, plastic shape lens colour 29 mm dia. part no. e lens raised, plastic flat transparent colourless, clear 704.611.7 0,002 green 704.611.5 0,002 red 704.611.2 0,002 yellow 704.611.4 0,002 lens metal with window shape lens colour 29 mm dia. part no. e lens metal with window flat aluminium anodized black 704.601.01 0,001 natural 704.601.81 0,001 stainless steel natural 704.601.91 0,001 lens metal shape lens colour 29 mm dia. part no. e lens metal flat aluminium anodized black 704.601.0 0,001 blue 704.601.6 0,001 green 704.601.5 0,001 natural 704.601.8 0,001 red 704.601.2 0,001 yellow 704.601.4 0,001 stainless steel natural 704.601.9 0,001
accessories 14 346 01.2000 for version ip 67 use marking cap 704.608.9 marking see page 366 for version ip 67 use marking plate 704.609.9 for version ip 67 use marking plate 704.609.9 lens cap for indicator full face illumination lens cap colour 29 mm dia. part no. e lens cap for indicator full face illumination transparent blue 704.603.6 0,003 colourless, clear 704.603.7 0,003 green 704.603.5 0,003 red 704.603.2 0,003 yellow 704.603.4 0,003 mushroom-head cap mushroom colour 40 mm dia. part no. e mushroom-head cap opaque black 704.604.0 0,001 green 704-604.5 0,001 red 704.604.2 0,001 yellow 704.604.4 0,001 mushroom-head cap illuminated mushroom colour 40 mm dia. part no. e mushroom-head cap illuminated transparent blue 704.614.6 0,007 clear 704.614.7 0,007 green 704.614.5 0,007 red 704.614.2 0,007 yellow 704.614.4 0,007 marking foil for lens plastic/metal front shape marking plate colour part no. e marking foil for lens plastic/ metal round opaque black 704.609.0 0,001 translucent white 704.609.9 0,001 translucent, ribbed, for neon lamps colourless, clear 704.609.7 0,001 marking plate for mushroom-head cap front shape marking plate colour part no. e marking plate for mushroom-head cap round translucent white 704.609.9 0,001 marking cap for lens raised plastic/metal front shape marking cap colour part no. e marking cap for lens raised plastic/metal round translucent, ribbed white 704.610.9 0,001 transparent, ribbed, for neon lamps colourless, clear 704.610.7 0,001
accessories 14 347 01.2000 1 4 mounting dimensions as of page 361 technical drawing as of page 355 marking cap for lens cap for indicator full face illumination front shape marking cap colour part no. e marking cap for lens cap for indicator full face illumination round translucent, ribbed white 704.608.9 0,002 transparent, ribbed, for neon lamps colourless, clear 704.608.7 0,002 front ring material colour 29 mm dia. part no. e front ring aluminium anodized black 704.600.1a 0,005 natural 704.600.1 0,005 plastic black 704.600.0 0,003 chromium-plated 704.600.4 0,003 light grey 704.600.6 0,003 stainless steel natural 704.600.9 0,006 front bezel-set for flush mounting material colour 35 mm dia. part no. mounting dimension e front bezel-set for flush mounting aluminium anodized black 704.955.0 4 0,016 natural 704.955.1 4 0,016 stainless steel natural 704.955.9 4 0,016 legend plate front dimension part no. e legend plate adhesive, aluminium anodized, natural, can also be engraved 30 x 42 mm for 22.5 mm dia. mounting hole 704.962.0 0,002 42 x 42 mm for 22.5 mm dia. mounting hole 704.962.5 0,003 42 x 48 mm for 30.5 mm dia. mounting hole 704.962.6 0,004 48 x 48 mm for 22.5 mm dia. mounting hole 704.962.7 0,004 protective cover 29 mm dia. part no. technical drawing e protective cover hinged, transparent, with means for sealing 704.925.0 22 0,007
accessories 14 348 01.2000 mounting dimensions as of page 361 description as of page 331 protective cover for flush mounting use 35 mm dia. part no. e protective cover for flush mounting hinged, transparent, with means for sealing, aluminium anodi- zed, natural for pushbutton, selector switch 704.928.38 0,007 for pushbuttons 704.928.18 0,007 protective front ring front ring part no. e protective front ring with transparent silicone membrane temperature resistance: -25c to +85c aluminium anodized 704.600.3 0,005 with transparent silicone membrane (to resist sea water) temperature resistance: -25c to +85c brass, nickel plated 704.600.2 0,005 protective front ring for flush mounting front ring part no. e protective front ring for flush mounting with transparent silicone membrane aluminium anodized, black 704.955.4 0,005 aluminium anodized, natural 704.955.3 0,005 blind plug colour 28 mm dia. part no. mounting dimension e blind plug black 704.960.7 1 0,004 spare key part no. e spare key for standard lock 1001, else on request 14-987.1001 0,006
accessories 14 349 01.2000 1 4 components layouts as of page 362 at back pcb plug-in base for pin orientation part no. components layout e pcb plug-in base 16.4 mm dia. x 9.8 mm high low level switching element axial 31-940 2 0,002 17,9 x 8,4 mm high with the extendable mounting the di- stance between pcb plug-in base and pcb can be varied up to 3mm. low level switching element right-angled 31-941 3 0,004 17.8 mm dia. x 9.8 mm high snap-action switching element 2.8 mm axial 31-942 4 0,002 cable shoe connection method part no. e cable shoe plug-in terminal 2.8 x 0.5 mm 31-946 0,001 universal terminal 2.0 x 0.5 mm 31-945 0,001 insulation socket part no. e insulation socket for connector 31-945 31-928 0,001 for connector 31-946 31-929 0,001 for snap-action switching element 2.8 mm to cover the plug-in terminals 01-928 0,001 terminal cover part no. e terminal cover for snap-action switching element 01-929 0,010
accessories 14 350 01.2000 for lamp voltage reduction please keep to the country specific security rules. for lamp voltage reduction wire in accordance with local electrical safety regulations. for illumination incandescent lamp voltage/current part no. e incandescent lamp base t 5.5 6 ac/dc/200 ma 10-1106.1369 (01-903.0) 0,001 12 ac/dc/100 ma 10-1109.1329 (01-903.1) 0,001 12 ac/dc/50 ma 10-1109.1279 (01-913.12) 0,001 24 ac/dc/25 ma 10-1112.1199 (01-913.24) 0,001 24 ac/dc/50 ma 10-1112.1279 (01-903.2) 0,001 28 ac/dc/40 ma 10-1113.1249 (01-903.28) 0,001 30 ac/dc/40 ma 10-1114.1249 (01-903.3) 0,001 36 ac/dc/35 ma 10-1116.1229 (01-903.4) 0,001 48 ac/dc/25 ma 10-1119.1199 (01-903.5) 0,001 60 ac/dc/20 ma 10-1120.1179 (01-903.6) 0,001 led number of chips voltage/current colour part no. e led base t 5.5 1 chip 12 vdc/14 ma white 10-2109.3139 0,001 24 vdc/14 ma white 10-2112.3139 0,001 28 vdc/14 ma white 10-2113.3139 0,001 6 chips 6 v/45 ma green 10-5106.3255 (01-968.05) 0,001 red 10-5106.3252 (01-968.02) 0,001 yellow 10-5106.3254 (01-968.04) 0,001 12 v/30 ma green 10-5109.3205 (01-968.15) 0,001 red 10-5109.3202 (01-968.12) 0,001 yellow 10-5109.3204 (01-968.14) 0,001 24 v/15 ma green 10-5112.3145 (01-968.25) 0,001 red 10-5112.3142 (01-968.22) 0,001 yellow 10-5112.3144 (01-968.24) 0,001 28 vdc/15 ma green 10-5113.3145 (01-968.35) 0,001 red 10-5113.3142 (01-968.32) 0,001 yellow 10-5113.3144 (01-968.34) 0,001 48 v/14 ma green 10-5119.3135 (01-968.45) 0,001 red 10-5119.3132 (01-968.42) 0,001 yellow 10-5119.3134 (01-968.44) 0,001 capacitor value part no. e capacitor use with 60 vac/20 ma, 50 hz lamp voltage 230 vac/0.27 m f 02-917.0 0,004 series resistor value part no. e series resistor use with 60 vac/20 ma lamp rating 110 v/2.7 kohm 02-904.0 0,003 125 v/3.3 kohm 02-904.1 0,003 145 v/4.7 kohm 02-904.3 0,003 230-240 v/10 kohm 02-904.7 0,003
accessories 14 351 01.2000 1 4 for fitting with series resistors and capacitors wire in accordance with local electrical safety regulations. wire in accordance with local electrical safety regulations. mounting dimensions as of page 361 terminal plate empty no. of spaces part no. e terminal plate empty 5 spaces 02-912.1 0,025 10 spaces 02-912.2 0,045 15 spaces 02-912.3 0,090 20 spaces 02-912.4 0,095 terminal plate with capacitor value no. of components part no. e terminal plate with capacitor use with 60 vac/20 ma lamp rating 0.27 m f/230/60 v 5 spaces 02-914.10 0,045 10 spaces 02-914.20 0,090 15 spaces 02-914.30 0,135 20 spaces 02-914.40 0,180 terminal plate with series resistor value no. of components part no. e terminal plate with series resistor use with 60 vac/20 ma lamp rating 2.7 kohm/110/60 v 5 spaces 02-913.10 0,040 10 spaces 02-913.20 0,075 15 spaces 02-913.30 0,115 20 spaces 02-913.40 0,155 3.3 kohm/125/60 v 5 spaces 02-913.11 0,040 10 spaces 02-913.21 0,075 15 spaces 02-913.31 0,115 20 spaces 02-913.41 0,155 10 kohm/230-240/60 v 5 spaces 02-913.17 0,040 10 spaces 02-913.27 0,075 15 spaces 02-913.37 0,115 20 spaces 02-913.47 0,155 assembling positioning insert part no. mounting dimension e positioning insert 14-910 1 0,001
accessories 14 352 01.2000 anti-twisting ring part no. e anti-twisting ring for flush mounting 704.954.0 0,002 reducing ring colour part no. e reducing ring for mounting of pushbutton 22.5 mm dia. in mounting hole 30.5 mm dia. black anodized 704.967.0 0,004 natural anodized 704.960.8 0,004 lens remover part no. e lens remover for pushbuttons for flush mounting 700.006.0 0,003 lamp remover part no. e lamp remover 02-906 0,002 led remover part no. e led remover 51-996 0,024
technical data 14 353 01.2000 1 4 switching system self-cleaning, double-break, snap action switching system (with contact gap 2 x 0.5 mm). 1 normally closed or 1 normally open contact per element. snap-action switching elements with soldering terminals at the sides: up to 4 switching element can be on a pushbutton (max. 4 normally closed and 4 normally open contacts). snap-action switching element with axial plug-in terminals 2,8 mm not stachable, only 1 switching element can be on a pushbutton. material actuator case polyamide material of contacts gold-plated silver switching element plug-in-/soldering terminal diallylphthalate dap, polyamide 66, polysulfone, heat-resistant and self-extinguishing soldering terminal: pa 6.6 ultramid mechanical characteristics actuating force 3.5-5.5 n, depending on the number of switching elements actuating torque measured at the key or lever of the keylock- or selector switch: 2.5- 5.5 ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action switch actuator with 3 positions: 2 x ca. 42 deflection momentary action 2 x ca. 90 deflection maintained action ambient air temperature -25c to +55c for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per din iec 68-) connection method snap-action switching element with tinned soldering terminals at the sides: max. wire diameter: 2 wires 1.2 mm max. wire cross-section of stranded cable: 1x 1 mm 2 . snap-action switching element with axial plug-in terminals, which can also be used as soldering terminals: plug-in terminal: 2.8 x 0.5 mm soldering terminal: max. wire diameter: 2 wires of 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm 2 or 1x1.0mm 2 degree of protection front as per iec 529: ip 67 mechanical life momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation actuator with snap-action switching element rebound time <= 5ms resistance to climate standard condition as per iec 68-2-3 and 2-30 changing condition as per iec 68-2-14 and 2-33 resistance to shock (single impacts, semi-sinusoidal) 15 g for 11 ms as per iec 512-4-3, iec 68-2-27 resistance to vibration (sinussodial) 10 g at 10-2000 hz, amplitude 1.5 mm as per iec 68-2-6 storage temperature -40c to + 85c (as per din iec 68-) electrical characteristics continuous thermal current lth 2 5a the maximum current in continuous operation and at ambient tem- perature not exceeding the quoted maximum values. electric strength 2500 vac, 50 hz, 1 min. between all terminals and earth, as per ic 512-2-11. electrostatic breakdown value <= 15 kv (keylock switch) protection class ii rated current 5a rated insulation voltage 250 vac/dc as per vde 0110, group b switch rating 250 vac/5 a (cos j 1) 250 vac/3 a (cos j 0.3) switch rating ac, cos j 0,7: voltage 125 v 250 v current 3 a 2 a switch rating dc (inductive), l:r = 30 ms: voltage 24 v 60 v 110 v 220 v current 2 a 0,7 a 0,2 a 0,1 a volume resistance starting value (initial) <= 50 m w rules en 61 058 approvals - sev 250 vac/5 a - csa 300 vac -ul - german lloyd -?ve -vde - russian marine register declaration of conformity -ce
technical data 14 354 01.2000 switching system this low level switching element was designed for switching low powers in electronic circuits. the mechanism assures reliable switching of loads ranging from a few m a/ m vupto100ma/42vac/ vdc. single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible. special features are the long life, extremely short rebound time and stable contact resistance. material actuator case polyamide material of contacts gold-plated switching element polysulfone, heat-resistant and self-extinguishing mechanical characteristics actuating force 3-4 n actuating torque measured at the key or lever of the keylock- or selector switch: 2.5- 5.5 ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action ambient air temperature -25c to +55c for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per din iec 68-) connection method the universal terminals permit these units to be mounted on printed circuit boards (pcb). these terminals can also be used as solder- ing or plug-in terminals. for these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. soldering terminal: max. wire diameter: 2 wires of 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm 2 plug-in terminal: 2.0 x 0.5 mm degree of protection front as per iec 529: ip 67 mechanical life momentary action 5 mio. cycles of operation maintained action 1 mio. cycles of operation rebound time typ. < 100 m s resistance to shock (single impacts, semi-sinusoidal) 15 g for 11 ms as per iec 512-4-3, iec 68-2-27 actuator with low level switching element storage temperature -40c to + 85c (as per din iec 68-) electrical characteristics electric strength 2500 vac, 50 hz, 1 min. between all terminals and earth, as per ic 512-2-11. electrostatic breakdown value <= 15 kv (keylock switch) protection class ii switch rating 10 m a/100 m v to 100 ma at 42 vac/vdc volume resistance starting value (initial) <= 50 m w buzzer system system piezo disc material alarm buzzer case polyamide front cap plastic: polyamide metal: nickel-plated brass sea-water proof mechanical characteristics ambient air temperature -25c to + 50c (as per din iec 68-) connection method plug-in terminal 2.8 x 0.5 mm degree of protection ip 65 as per iec 529 storage temperature -25c to + 50c (as per din iec 68-) electrical characteristics frequency (tone) ca.2.8 khz continuous tone only operation voltage/current operation voltage: 24 vdc 10% operation current: <= 25 ma sound pressure 95 db (a) 8 at a distance of 0.1 m buzzer
technical drawing, dimension, layout 14 355 01.2000 1 4 1 indicator front illumination, indicator full face illumination page 333 2 indicator full face illumination page 333 3 illuminated-/pushbutton front illumination page 334 technical drawing
technical drawing, dimension, layout 14 356 01.2000 4 illuminated-/pushbutton front illumination page 334 5 illuminated-/pushbutton front illumination page 334 6 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336
technical drawing, dimension, layout 14 357 01.2000 1 4 7 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336 8 illuminated pushbutton with mushroom-head cap page 336 9 keylock switch 2 positions page 337
technical drawing, dimension, layout 14 358 01.2000 10 keylock switch 2 positions page 337 11 selector switch 2 positions page 338 12 selector switch 2 positions page 338
technical drawing, dimension, layout 14 359 01.2000 1 4 13 selector switch 2 positions page 338 14 selector switch 2 positions page 338 15 buzzer page 339 16 indicator for flush mounting page 340
technical drawing, dimension, layout 14 360 01.2000 17 illuminated-/pushbutton for flush mounting page 341 18 illuminated-/pushbutton for flush mounting page 341 19 keylock switch 2 positions for flush mounting page 341
technical drawing, dimension, layout 14 361 01.2000 1 4 20 selector switch 2 positions for flush mounting page 343 21 buzzer for flush mounting page 344 22 protective cover page 347 1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, keylock switch 2 positions, se- lector switch 2 positions, buzzer, blind plug, positioning insert page 333, 334, 337, 339, 338, 348, 351 mounting dimension
technical drawing, dimension, layout 14 362 01.2000 2 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336 3 selector switch 2 positions page 338 4 indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for flush mounting, front bezel-set for flush mounting, buzzer for flush mounting page 340, 341, 342, 343, 347, 344 1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, pushbutton with mushroom- head cap, illuminated pushbutton with mushroom-head cap, keylock switch 2 positions, selector switch 2 positions, indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for flush mounting page 333, 334, 335, 336, 337, 338, 340, 341, 342, 343 components layouts
technical drawing, dimension, layout 14 363 01.2000 1 4 2 pcb plug-in base page 349 3 pcb plug-in base page 349 4 pcb plug-in base page 349
circuit drawing 14 364 01.2000 circuit drawing 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 circuit drawing 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 circuit drawing
typical applications 14 365 01.2000 1 4 with indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space.
marking 14 366 01.2000 indicator - engraving of marking cap all marking plates and marking caps are engraved in lettering to din 1451, with black or white filling. can also be supplied with standard lettering or symbols. for symbols see series 04. lettering to be engraved should be specified on a separate order sheet. (available from us on request.) height of letters mm number of lines number of letters per line approx. line spacing mm b1 b2 b3 339974,6 4276 -6,6 813 - - - pushbutton/illuminated pushbuttons - engraving of marking plate or raised marking cap all marking plates and marking caps are engraved in lettering to din 1451, with black or white filling. can also be supplied with standard lettering or symbols. lettering to be engraved should be specified on a separate order sheet. (available from us on request.) height of letters mm number of lines number of letters per line approx. line spacing mm b1 b2 b3 3 3 11 10 9 4,6 4287 -6,6 814 - - - engraving of labels all labels are engraved in lettering to din 1451, with black filling. lettering to be engraved should be specified on a separate order sheet. (available from us on request.) height of letters mm number of lines number of letters per line approx. line spacing mm l = 30 mm l = 42 mm 3 2 14 20 4,5 4 1 10 14 4 81572

▲Up To Search▲

Price & Availability of 704-030518

	To Download 704-030518 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .