View 5C-03-B81-Y7C-A3U1V1FN-AM_1466265.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 1 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang lead (pb) free product - rohs compliant feature ? colorless clear resin. ? low thermal resistance ? packaged in tubes for automatic insertion equipment. ? total flux: 11250 to 22500 mlm at 150ma. ? qualification according to aec-q101. applications ? automotive exterior lighting: turn light, rear-view mirror light, side light, license light switch,? etc. ? electronic signs and signals ? general lighting application device selection guide chip material emitted color resin color algainp yellow water clear
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 2 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang absolute maximum ratings (ta=25 )
parameter symbol rating unit reverse voltage v r 5 v forward current i f 150 ma peak forward current (duty 1/10 @1khz) i fp 200 ma power dissipation pd 400 mw operating temperature t opr -40 ~ +100
storage temperature tstg -40 ~ +100
junction temperature t j 120
thermal resistance rth j-a 100
/w esd hbm 4000 v esd (classification acc. aec q101) esd mm 200 v soldering temperature t sol wave soldering : 260 for
5 sec. hand soldering : 350 for 3 sec.

lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 3 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang electro-optical characteristics (ta=25 )
parameter symbol min. typ. max. unit condition total flux v 11250 --- 22500 mlm i f =150ma viewing angle 2 1/2 --- 85 --- deg i f =150ma peak wavelength p ---- 594 ---- nm i f =150ma dominant wavelength d 586 ---- 598 nm i f =150ma spectrum radiation bandwidth ? --- 16 --- nm i f =150ma forward voltage v f 1.7 --- 2.9 v i f =150ma reverse current i r --- --- 10 a v r =5v note: 1. tolerance of total flux: 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 4 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang bin range of forward voltage (ta=25 )
bin code min. max. unit condition a 1.7 1.9 b 1.9 2.1 c 2.1 2.3 d 2.3 2.5 e 2.5 2.7 f 2.7 2.9 v i f =150ma note: tolerance of forward voltage: 0.1v bin range of dominant wavelength (ta=25 )
bin code min. max. unit condition 1 586 590 2 590 594 3 594 598 nm i f =150ma note: tolerance of dominant wavelength: 1nm
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 5 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang bin range of total flux (ta=25 )
bin code min. max. unit condition u1 11250 14250 u2 14250 18000 v1 18000 22500 mlm i f =150ma note: tolerance of total flux: 11%
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 6 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang typical electro-optical characteristics curves typical curve of spectral distribution r e l a t i v e i n t e n s i t y ( % ) wavelength (nm) diagram characteristics of radiation r e l a t i v e i n t e n s i t y view angle(degree) # 7 7 ?
0 . 0 0 . 2 0 . 4 0 . 6 0 . 8 1 . 0 - 9 0 0 - 7 0 0 - 5 0 0 - 3 0 0 - 1 0 0 9 0 0 8 0 0 6 0 0 7 0 0 4 0 0 5 0 0 3 0 0 2 0 0 1 0 0 0 0
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 7 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang forward current vs. forward voltage (ta=25 )
dominant wavelength vs. forward current (ta=25 )
f o r w a r d c u r r e n t ( m a ) d o m i n a n t w a v e l e n g t h ( n m ) forward voltage (v) forward current (ma) relative luminous flux vs. forward current (ta=25 )
max. permissible forward current vs. ambient temperature r e l a t i v e l u m i n o u s i n t e n s i t y f o r w a r d c u r r e n t ( m a ) forward current (ma) ambient temperature ( )
0 30 60 90 120 150 180 0 20 40 60 80 100 120 1 10 100 1000 1.6 1.8 2.0 2.2 2.4 2.6 586 588 590 592 594 596 598 0 30 60 90 120 150 0.1 1.0 10.0 100.0 1000.0 1 10 100 1000
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 8 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang package dimension notes: 1. an epoxy meniscus may extend about 1.5mm(0.059") up/down the leads 2. tolerances unless dimensions ? 0.25mm 3. all dimensions are in millimeters
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 9 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang moisture resistant packing materials tube tube label explanation ? part no: product number ? qty: packing quantity ? lot no: lot number ? cat: rank of (vf)(note*) (v) note: d /cie/color temperature note: tolerances unless mentioned 2.0mm. unit = mm standard box tube label explanation ? cpn: customer?s product number ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note*)(v) note: d /cie/color temperature ? hue/ref: reference ? lot no: lot number note: tolerances unless mentioned 3.0mm. unit = mm part no: qty: lot no: cat: label area
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 10 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang packing quantity packing material length width height (mm) tube quantity (pcs) led quantity (pcs) tube 485 x 9.5 x 14.8 1 60 standard box 510 x 100 x 45 15 900 large box 510 x 150 x 90 12 10800 note: 1. normal packing specification is use standard box, unless already defined initially. 2. vacuum packing with anti-static bag after packing in standard box. 3. specifications are subject to change without prior notice.
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 11 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang notes 1. lead forming ? during lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming should be done before soldering. ? avoid stressing the led package during leads forming. the stress to the base may damage the led?s characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperatures may cause failure of the leds. ? when mounting the leds onto a pcb, the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. storage ? the leds should be stored at 30c or less and 70%rh or less after being shipped from everlight and the storage life limits are 3 months. if the leds are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. solder the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead frame while the leds are at high temperature particularly when soldering. ? recommended soldering conditions: hand soldering dip soldering temp. at tip of iron 300
max. (30w max.) preheat temp. 100
max. (60 sec max.) soldering time 3 sec max. bath temp. 260 max. distance no lower than 1.6mm from the base of stopper bath time. 5 sec max. ? dip and hand soldering could just be done no more than twice. ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 12 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang vibration until the leds return to room temperature. ? a rapid-rate process is not recommended for cooling the leds down from the peak temperature. ? although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. dry at room temperature before use. ? do not clean the leds by the ultrasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the led 5. circuit protection ? below the zener reference voltage vz, all the current flows through led and as the voltage rises to vz, the zener diode ?breakdown." if the voltage tries to rise above vz current flows through the zener branch to keep the voltage at exactly vz. ? when the led is connected using serial circuit, if either piece of led is no light up but current can?t flow through causing others to light down. in new design, the led is parallel with zener diode. if either piece of led is no light up but current can flow through causing others to light up.
lifecyclephase: revision : 1 expired period: forever release date:2010-05-12 18:23:03.0 everlight electronics co., ltd. technical data sheet 5mm snapled 5C-03-B81-Y7C-A3U1V1FN-AM everlight electronics co., ltd. http://www.everlight.com rev.: 1 page: 13 of 13 device no.: dpe-0000200 published date: may.11.-2010 created by: eddie huang 6. heat management ? heat management of leds must be taken into consideration during the design stage of led application. the current should be de-rated appropriately by referring to the de-rating curve found in each product specification. ? the temperature surrounding the led in the application should be controlled. please refer to the data sheet de-rating curve. 7. esd (electrostatic discharge) ? electrostatic discharge (esd) or surge current (eos) can damage leds. ? an esd wrist strap, esd shoe strap or antistatic gloves must be worn whenever handling leds. ? all devices, equipment and machinery must be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic le ns as a result of friction between leds during storage and handing. 8. other ? above specification may be changed without notice. everlight will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ? these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent.

▲Up To Search▲

Price & Availability of 5C-03-B81-Y7C-A3U1V1FN-AM

	To Download 5C-03-B81-Y7C-A3U1V1FN-AM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .