june. 2005 (rev. 3) - 1 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com IP9009 is a 5-ch motor driver with ldo regulator and reset controller. it is suitable for cd-p/vcd-p/dvd-p systems. the motor driver part is composed of four btl drivers and one forward/reverse controlled dc motor driver. - 4-ch btl driver. - 1-ch forward/reverse controlled dc motor driver. - built-in adjustable ldo regulator controller. - built-in reset controller. - built-in tsd (thermal shut down) circuit. - built-in mute circuit. - built-in power save circuit. descriptions order information features 28ssoph-375b device package operating temp IP9009 28ssoph-375a -35 o c ~ +85 o c IP9009-tf 28ssoph-375a -35 o c ~ +85 o c IP9009l 28ssoph-375a -35 o c ~ +85 o c IP9009l-tf 28ssoph-375a -35 o c ~ +85 o c IP9009 28ssoph-375b -35 o c ~ +85 o c IP9009-tf 28ssoph-375b -35 o c ~ +85 o c IP9009l 28ssoph-375b -35 o c ~ +85 o c IP9009l-tf 28ssoph-375b -35 o c ~ +85 o c * l : lead free * tf : tape & reel packing * l-tf : lead free and tape & reel packing
june. 2005 (rev. 3) - 2 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com pin descriptions pin connections no symbol i/o description 1 fwd i loading motor forward input 2 rev i loading motor reverse input 3 ctl i loading motor speed control 4 ps i power save 5 in1 i ch1 input 6 in2 i ch2 input 7 svcc - signal power supply 8 pvcc1 - power supply 1 9 vol- o loading driver output(-) 10 vol+ o loading driver output(+) 11 vo2- o ch2 driver output(-) 12 vo2+ o ch2 driver output(+) 13 vo1- o ch1 driver output(-) 14 vo1+ o ch1 driver output(+) no symbol i/o description 15 vo4+ o ch4 driver output(+) 16 vo4- o ch4 driver output(-) 17 vo3+ o ch3 driver output(+) 18 vo3- o ch3 driver output(-) 19 gnd - ground 20 pvcc2 - power supply 2 21 mute i mute 22 in3 i ch3 input 23 in4 i ch4 input 24 vdet i reset controller input 25 reset o reset controller output 26 reoadj o adjustable regulator feedback 27 rebadj o adjustable regulator control 28 bias i bias
june. 2005 (rev. 3) - 3 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com characteristics symbol value unit maximum supply voltage vccmax v power dissipation pd 2.3 * w operating temperature topr -35 ~ +85 o c storage temperature tstg -55 ~ 150 o c 15 note> 1. when mounted on 50mm x 50mm x 1mm pcb (phenolic resin material). 2. power dissipation reduces 18.4 mw/ o c for using above ta=25 o c 3. do not exceed pd and soa. power dissipation curve recommended operating conditions characteristics symbol value unit signal supply voltage svcc 4.3 ~ 13.2 v power supply voltage 2 pvcc2 4.3 ~ svcc v power supply voltage 1 pvcc1 4.3 ~ svcc v absolute maximum ratings p o w e r d i s s i p a t i o n ( m w ) ambient temperature ( c ) 25 50 75 100 125 150 175 0 1 2 3
june. 2005 (rev. 3) - 4 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com electrical characteristics characteristics symbol conditions min typ max unit quiescent circuit current icc no load - 20 30 ma power save on current ips pin5=gnd - 0.5 2.0 ma power save on voltage vpson pin5=sweep - - 0.5 v power save off voltage vpsoff pin5=sweep 2.0 - - v [ adjustable regulator part ] output voltage v reg il=100ma vout* 0.95 vout vout* 1.05 v load regulation vom il=0->200ma -50 0 50 mv line regulation vcc vcc=6->10v,il=100ma -50 0 50 mv [ reset controller part ] detecting voltage vdet pin24=sweep (low->high) 2.6 2.9 3.2 v hysteresis voltage vdet - 50 - mv maximum output sink current isink 3 6 - ma output saturation voltage vsat rl=1k ohm - - 0.4 v output offset voltage voos vin=vref -100 - +100 mv maximum output voltage voms 3.6 4.0 - v closed-loop voltage gain avfs vin=0.1vrms, f=1khz 17 19 21 db mute on voltage vmon pin21=sweep - - 0.5 v mute off voltage vmoff pin21=sweep 1.5 - - v mute pin current imp pin21=5.0v 200 300 ua bias pin current ibias pin28=2.5v 80 120 ua [ btl drive part ] (svcc=12.0v,pvcc1=pvcc2=5v, rl=12ohm, bias=1.65v, ta = 25 o c unless otherwise specified.)
june. 2005 (rev. 3) - 5 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com electrical characteristics characteristics symbol conditions min typ max unit [ loading driver part ] input high level voltage vih 1.5 - - v input low level voltage vil - - 0.5 v fwd/rev pin current iin pin1=pin2=5.0v - 200 300 ua maximum output voltage vo rl=25 ohm 9.0 10 - v voltage gain gvf pin3=sweep 7 9 11 db (svcc=12.0v,pvcc1=pvcc2=5v, rl=12ohm, bias=1.65v, ta = 25 o c unless otherwise specified.)
june. 2005 (rev. 3) - 6 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com typical application circuit
june. 2005 (rev. 3) - 7 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com package dimension(28ssoph-375a)
june. 2005 (rev. 3) - 8 - IP9009 5-ch motor drive ic with regulator and reset controllers www.interpionsemi.com package dimension(28ssoph-375b)
|
