View AV-14FMG4_840596.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ggt0037-001a-h colour television model with the teletext function av -14fmt4 av -21cmt4 av -21dmt4 av -21ymt4 model without the teletext function av -14ag14 av -14amg4 av -14fmg4 av -14fmg4b av -20nmg4 av -21cg14 av -21cmg4 av -21dmg4 av -21fmg4b av -21lmg4 av -21tg14 av -21tmg4 av -21ymg4 contents knowing your tvs features .......................... 2 remote control buttons and basic functions . 3 tv buttons and functions .............................. 5 setting up your tv ........................................ 6 basic setting for picture ................................. 8 advanced setting for picture ......................... 9 original features for picture ........................... 9 basic setting for sound ................................ 10 advanced setting for sound ........................ 10 favorite channel and video setting ............. 11 customized setting ..................................... 12 tv channel presetting ................................. 13 additional preparation ................................. 15 t roubleshooting .......................................... 15 specifications ................................ back cover instructions ggt0037-001a-h-cover 5/24/04, 3:06 pm 21
2 safety instructions w arning: to prevent fire or shock hazard, do not expose this appliance to rain or moisture. caution: to ensure personal safety, observe the following rules regarding the use of this tv. 1 operate only from the power source indicated on the rear of the tv. 2 av oid damaging the power cord and mains plug. when unplugging the tv, grasp the mains plug. do not pull on the power cord. 3 never block or cover the cabinet ventilation openings. never install the tv where good v entilation is unattainable. when installing this tv, leave spaces for ventilation around the tv more than the minimum distances as shown in the diagram. 4 do not allow objects or liquid into the cabinet openings. 5 in the event of a fault, unplug the unit and call a jvc service technician. do not attempt to repair it yourself or remove the rear cover. 6 the surface of the tv screen is easily damaged. be very careful with it when handling the tv. should the tv screen become soiled, wipe it with a soft dry cloth. never rub it forcefully. never use any cleaner or detergent on it. 7 if you are not going to use this tv for a long period of time, be sure to disconnect the ac plug from the ac socket. 8 the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 15 cm 10 cm 15 cm 10 cm knowing your tvs functions main features function description *teletext y ou can view teletext programmes which are broadcasted by some tv channels. t eletext programme is an information in text form. favorite ch (channel) y ou can register up to four favorite channels for quick re-call with one-press. ai volume tv adjusts automatically the volume to the same level for all tv channels to avoid sudden change of the volume when selecting different tv channel. vnr y ou can reduce the picture noise when you viewing noisy tv programmes or video sources. white balance y ou can choose one of three tones of white to match to the video source such as movie, sports, etc. changing white balance affects the appearance of all other colours on the screen. child lock to prevent accidental operation by your children, you can disable the control buttons on the tv. * the teletext function is available for av-14fmt4, av-21cmt4, av-21dmt4 and av- 2 1ymt4 only. the other models do not have the teletext function. please check your tvs model number. the model number is indicated at the rear of your tv. thank you for buying this jvc colour television. to make sure you understand how to use your new tv, please read this manual throughly before you begin. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 2
3 3 2 8 6 7 9 5 1 4 0 1 9 2 3 7 5 0 4 6 8 remote control buttons and basic functions rm-c1260 with the teletext function (av-14fmt4/av-21cmt4/ av -21dmt4/av-21ymt4) rm-c1261 without the teletext function (av-14ag14/av-14amg4/ av -14fmg4/AV-14FMG4b/ av -20nmg4/av-21cg14/ av -21cmg4/av-21dmg4/ av -21fmg4b/av-21lmg4/ av -21tg14/av-21tmg4/ av -21ymg4) no. press to 1 power turn on or off the tv from standby mode. 2 menu/ok display menu and confirm selected function. 3 5 / / 2 / 3 select and adjust menu function. 4 channel m select the desired channel number. 5 volume m adjust the volume level. 6 tv/video select tv or video terminal input. 7 muting turn off the volume. press this button again to resume the volume. 8 display display the programme number or video terminal number and pr list (channel list) on the screen. you can select the channel using the pr list. 1 press the display button once to display the pr list. 2 press 5 / / 2 / 3 button to choose a channel, then press the menu/ok button. y ou can confirm the favorite channels in the pr list. the channels set to favorite channels are indicated with coloured mark. 9 0~9, -/-- select the programme number. for two digits programme number, press -/--, then press the number button. 0 return , a) return to the frequently view channel with one touch. 1 choose the channel you want to register. 2 press and hold return , button until ?eturn plus programmed! appears. to cancel, press and hold return , button until ?eturn plus canceled! appears. b) return to the previously viewed channel, if you have not set or have cancelled the return channel as above. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 3
4 remote control buttons and basic functions how to operate menus and menu locations to operation note display the menu. press the menu/ok button 2 .t o exit the menu, press the display button 8 or choose exit menu. display the top menu. press 5 / buttons 3 to choose a menu title. press button 3 to display the then press menu/ok button 2 . next page for more functions. display the 2nd menu. press 5 / buttons 3 to choose a menu title. then press menu/ok button 2 . display the 3rd menu. press 5 / buttons 3 to choose a menu title. then press menu/ok button 2 . return to the previous press the display button 8 . menu. choose the setting of press 5 / buttons 3 to choose a function. press the menu/ok button 2 to a function. then press the 2 / 3 buttons 3 to change the exit from the menu. setting. adjust the effect level press 5 / buttons 3 to choose a function. of a function. then press the 2 / 3 buttons 3 to adjust the effect level. display the sub menu press 5 / buttons 3 to choose a function. of a function. then press menu/ok button 2 to display the sub menu. the following chart shows locations of functions in menus. in this manual, location of a function is described as follows: menu top menu 2nd menu menu top menu 2nd menu 3rd menu note: some functions have the 4th menus as the sub-menus. t op menu 2nd menu location 3rd menu location menu input ext. input p.12 - - display p.12 - - picture picture mode p.8 - - picture setting p.8 - - white balance p.8 - - picture features - vnr p.12 fa vorite ch setting p.11 video setting p.11 colour system p.8 picture booster p.8 sound ai volume p.10 - - features off timer p.12 - - child lock p.12 - - install auto program p.13 - - edit/manual p.13 delete, move, manual, insert p.13 language p.12 language p.12 blue back p.9 - - auto shutoff p.12 - - text language p.9 text language p.9 exit - - - - * if you want to adjust picture setting menu, you must set picture mode menu to user. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 4
5 tv buttons and functions the following illustrations are for AV-14FMG4 and av-21tg14 only, which are used for e xplanation purpose. your tv may not look exactly like the illustrated. front of the tv av -14fmg4 av- 2 1tg14 rear of the tv av -14fmg4 av-21tg14 ok menu video audio in (video-2) 9 7 4 2 1 8 6 5 video -1 input video audio output 0 - = no. button/terminal description 1i (main power) press to turn on or turn off the tvs main power. 2 power lamp indicate the tv is being turned on or off. no colour : tvs main power is being turned off. red : tvs main power is being turned on. 3 timer lamp lights when the tv is in the off timer mode. 4 remote control sensor 5 volume m press to adjust the volume level. 6 channel m press to select the desired channel. 7 menu press to display the menu. 8 in (video-2) video and audio input jacks for video-2 mode. 9 headphone jack. 0 aerial socket. - output video and audio output jacks. = video-1 input video and audio input jacks for video-1 mode. how to operate the menus with the tv button w ork as same as the button on the tv button remote control unit note menu menu/ok button to display main menu and exit menu after finish setting. channel m / 5 button to select menu function. volume m 2 / 3 button to adjust the desired function. menu ok video audio in (video-2) 9 7 4 3 2 1 8 6 5 video audio 0 - = video -1 input output ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 5
6 setting up your tv ca ution ?turn off the equipment including the tv before connecting. 1 connecting the aerial to install rod aerial install into the top-rear aerial holder. once installed, it cannot be removed. video audio video -1 input output video audio video -1 input output if you connect a vcr, connect the aerial output jack of your vcr and the aerial jack on the tv with the aerial cable. then connect the output jacks of your vcr and the video-1 input jacks of the tv with the video cable and audio cables. for details, see the manual of your vcr. video audio video-1 input output to rf output to audio/video output to aerial input the illustration shown is just a sample. it may not be same as your tv. 2 connecting the compatible main plug to the ac outlet. 3 inserting batteries into the remote control. insert two batteries by following the a and polarities and inserting the end first. ca ution: f ollow the cautions printed on the batteries. notes: ?use aa/r6/um-3 dry cell batteries. ?if the remote control does not work properly, fit new batteries. the supplied batteries are for testing, not regular use. 4t urn on the tv by pressing the main power button. jvc logo appears on the screen. vhf/uhf outdoor aerial rear of the tv vcr indoor aerial rod aerial* aerial holder vhf/uhf outdoor aerial rear of the tv * for model 14?series only ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 6
7 setting up your tv (continued) 5 making the initial settings set up your tv by pressing any buttons except power button, then operate the tv menu by following the steps as below:
7 ?press the red button to cancel the setup t our restart function. if you want to make initial settings again when the next time you turn on the tv, press the menu/ok button to activate the setup tour restart function. edit pr ch/cc 7 ch 09 8 ch 11 9 ch 13 10 11 12 13 3 ? r oceed to edit the channel list (pr list). f or details, see page 13.
???a ? r ess 5 / button to select your desired language, then press menu/ok button.

? r ess 5 / button to select your desired t eletext language group. press menu/ok. f or details, see page 9. (for av-14fmt4/av-21cmt4/av-21dmt4/ av -21ymt4 only)
tv will start searching for the channels. to stop auto program, press menu/ok button. if the jvc logo does not appear, use language, text language, and auto program functions to make the initial settings. those functions are located in the install menu. if the jvc logo appears, although you had made the initial settings, press the tv/video button to exit from initial settings. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 7
8 basic setting for picture colour system y ou can select the appropriate colour system when the picture is not clear or no colour appears. press the colour system button to select a setting. auto pal secam ntsc3.58 ntsc4.43 to operate this function with a menu: ? menu picture picture features colour system f or the colour system in each country or region, see the table below: area country or region system bahrain, kuwait, oman, qatar, united arab emirates, yemen, etc. pal indonesia, malaysia, singapore, asia, middle thailand, india, etc. east china, vietnam, etc. pal hong kong, etc. pal islamic republic of iran, lebanon, secam saudi arabia, etc. philippines, taiwan, myanmar, etc. ntsc russia, etc. secam europe czech republic, poland, etc. pal germany, holland, belgium, etc. pal uk, etc. pal oceania australia, new zealand, etc. pal republic of south africa, etc. pal africa nigeria, etc. pal egypt, morocco, etc. secam picture mode y ou can choose the desired picture setting with one-touch. press the picture mode button to select a setting. soft softens contrast and sharpness. bright heightens contrast and sharpness. standard standard picture setting. user you can change this picture setting as you like. select user and adjust following items in the picture setting menu. (contrast, bright, sharp, colour, tint*) *tint can only be adjusted in ntsc system. to operate this function with a menu: ? menu picture picture mode to return the user setting to the default, press the blue button when the picture setting menu appears. adjusting the picture - user y ou can adjust the desired picture setting when selecting user in picture mode. 1 select the user in picture mode under picture menu. ? user menu picture picture mode 2 select the picture setting in picture menu, then adjust the setting. ? menu picture picture setting contrast 2 : lower contrast 3 : higher contrast bright 2 : darker 3 : brighter sharp 2 : softer 3 : higher colour 2 : lighter 3 : deeper tint* 2 : reddish 3 : greenish *tint can only be adjusted in ntsc system. picture booster (av-21ymg4/av-21ymt4 only) y ou can improve picture clarity when the picture is unclear due to the low signal reception. press the picture booster button to select the desired mode. ? menu picture picture features picture booster high perform at maximum level. low perform at minimum level. off cancel the function. white balance y ou can change the white balance of the picture to better match the type of video being viewed. select the white balance in the picture menu, then choose the desired setting. ? menu picture white balance normal normal white balance. cool bluish white. w arm reddish white. ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 8
9 advance setting for picture blue back y ou can set the tv to automatically change to a blue screen and mute the sound if the signal is w eak or absent, or when there is no input from an antenna. select the blue back in the install menu, then choose on or off. original features for picture teletext y ou can watch the teletext broadcast channel with text function. 1 press the text button to select the desired mode as follows: tv mode text mode mix mode 2 press the channel -/+ buttons, number buttons or colour buttons to select other t eletext pages. 3 press text or tv/video button to return to tv mode. y ou can also operate the teletext using the following buttons: 5 5 (hold) hold a teletext page. the 5 5 (hold) are displayed at the top left of the screen. to cancel, press 5 5 (hold) button again. (reveal) display the hidden text (e.g. answers to a quiz). to cancel, press (reveal) button again. 5 5 (size) enlarge the teletext display. (index) return to the index page instantly. (cancel) watch tv programme while waiting for a teletext page. when the teletext page is found, a page number appears at the upper left of the screen. press (cancel) to view the teletext page. (sub-page) operate the (sub-page) function. sub-page numbers are displayed at the left of the screen. to cancel sub-page function, press (sub-page) button again. using the list mode y ou can store and recall the favorite teletext pages in memory using the colour buttons. 1 in text mode, press the mode button to enter the list mode. ? menu install blue back if you wish to continue viewing the poor picture, cancel the blue back function. 2 press a colour button, then press the number buttons to enter the page number. 3 press and hold down the (store) button. the page number is blinking white to indicate that they are stored in memory. 4 to store other favorite teletext pages, repeat step 2 to 3. to recall the favorite teletext page, press the mode button, then press the colour button. to exit the list mode, press the mode button again. when viewing teletext programme, menu operations are not available. if characters on a teletext programme do not appear properly, change the text language setting. text language y ou can set the teletext language group that corresponds to the programmes. select text language in the install menu, then choose the desired language group. ? menu install text language group- 1 english, german, swedish / finnish / danish / hungarian, italian, french, spanish / portuguese, turkish group- 2 polish, german, estonian, slovenian, czech / slovakian, rumanian group- 3 polish, german, estonian, lettish, russian, ukrainian group- 4 english, french, turkish, arabic, iranian depending on the broadcast, the language set may not display properly. ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 9
10 basic setting for sound advanced setting for sound sound system y ou can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. press the sound system button to select a setting. b/g i d/k m the function is not available in video mode. f or the sound system in each country or region, see the table below: area country or region system bahrain, kuwait, oman, qatar, united arab emirates, yemen, etc. b/g indonesia, malaysia, singapore, asia, middle thailand, india, etc. east china, vietnam, etc. d/k hong kong, etc. i islamic republic of iran, lebanon, b/g saudi arabia, etc. philippines, taiwan, myanmar, etc. m russia, etc. d/k europe czech republic, poland, etc. d/k germany, holland, belgium, etc. b/g uk, etc. i oceania australia, new zealand, etc. b/g republic of south africa, etc. i africa nigeria, etc. b/g egypt, morocco, etc. b/g ai volume y ou can adjust the volume of all the channels and video inputs to the same level automatically. select the ai volume in sound menu, then choose on or off. ? menu sound ai volume ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 10
11 fa v orite channel and video setting to register the favorite channel y ou can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 in tv mode, select a tv channel (pr01- 99) you desired to register. 2 press and hold a colour button for 3 seconds or more. ?avorite channel 7 programmed! appears on the screen and current channel is registered. 3 to register other favorite channels, repeat step 1 to 2. to recall the favorite channel, press the colour button. when the tv is in text mode or menu mode, favorite channel function is not available. to adjust favorite channel setting (favorite ch setting) y ou can adjust the picture settings for the favorite channels. 1 display the picture menu and select fa vorite ch setting in picture features menu. ? favorite ch setting menu picture picture features 2 select favorite channel in favorite ch setting menu, then choose the desired favorite channel. ? favorite channel favorite ch setting favorite ch setting favorite channel pr 01 contrast bright sharp colour tint effect on 3 select effect, then press 2 / 3 button to choose on. to cancel the settings, choose off. 4 select the desired item that you wish to adjust. contrast bright sharp tint colour 5 press the menu/ok button to exit the menu. to adjust the video setting (video setting) y ou can adjust the picture and sound settings for video inputs. 1 display the picture menu and select video setting in picture features menu. ? video setting menu picture picture features 2 select video status in video setting menu, then choose the desired video input. ? video setting video status video setting video status video-1 contrast bright sharp colour tint effect on 3 select effect, then press 2 / 3 button to choose on. to cancel the settings, choose off. 4 select the desired item that you wish to adjust. contrast bright sharp tint colour 5 press the menu/ok button to exit the menu. ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 11
12 customized setting vnr y ou can reduce the noise. select the vnr in the picture features menu under picture menu, then choose a setting of vnr function. ? vnr menu picture picture features off vnr is turned off. auto effect of vnr is automatically controlled. min effect of vnr becomes minimum level. max effect of vnr becomes maximum level. if you select max, the picture becomes softer ev en if the original picture is sharp. language y ou can choose your desired on screen display language. select the language in the install menu, then choose a language. ? menu install language child lock y ou can disable the front control buttons of the tv. select the child lock in the features menu, then choose on or off. ? menu features child lock off timer y ou can set the tv to turn off automatically to standby mode after a set time. press the off timer button to select a desired period of time. off timer 0 120 10 y ou can set the period of time to a maximum of 120 minutes in 10 minutes step. to operate this function with a menu: ? menu features off timer when the elapsed of time left one minute, ?ood night!?appears on the screen. y ou can display the off timer menu again to confirm or change the remaining time. auto shutoff y ou can set the tv to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. select auto shutoff in install menu, then choose on or off. ? menu install auto shutoff the auto shutoff function does not turn off the tvs main power. the auto shutoff function is not available in video mode. ext. input (tv/ video) y ou can select tv or video terminal input with one touch. press the tv/video button to select an input. to operate this function with a menu: ? menu input ext.input display y ou can display the programme number, video terminal number and pr list on the screen. press the display button to display the informa- tion on screen. to operate this function with a menu: ? menu input display about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 12
13 tv channel presetting to register the tv channels auto- matically y ou can register the tv channels into the tvs channel list automatically. 1 display the install menu. ? menu install 2 choose auto program, then press the menu/ok button. auto program function starts, and the channels received are registered in the channel list (pr list) automatically. 3 ?etup tour restart??appears. to start the press the menu/ok button. setup tour then proceed to step 5 of ?etting up your tv?on page 7. to skip the press the red button. setup tour 4 the edit menu appears. to edit the proceed to the step 3 of ?o channel list edit the channel list (pr list) on this page. if a channel is proceed to the step 3 of ?o not registered register the channel manually on this page. to exit the menu press the menu/ok button. f or details of ?etup tour? see page 7. to register the tv channels manually (manual in the edit menu) y ou can register the tv channels into the tvs channel list manually. 1 display the install menu. ? menu install 2 choose edit/ manual, then press the menu/ok button. edit menu appears. edit pr ch/cc 7 ch 09 8 ch 11 9 ch 13 10 11 12 13 3 3 choose the channel which you want to register. 4 press the blue button to activate the manual function. the sound system of the channel appears at the right of the ch/cc number. 5 press the 3 button to choose an appropri- ate sound system. for details, see ?ound system?on page 10. 6 press the green or red button to search for the tv channel. searching stops when a channel is found and displayed. 7 repeat step 5 until your desired tv channel appears. if the reception press the blue or yellow button is poor to fine tune the tv channel. if noisy sound press the 3 button to choose is heard an appropriate sound system. 8 press the menu/ok button to exit the menu. to edit the channel list (pr list) (move and delete in the edit menu) y ou can edit the tv channel list as you like. note: after this operation, other channels pr numbers will be changed. 1 display the install menu. ? menu install 2 choose edit/ manual, then press the menu/ok button. edit menu appears. edit pr ch/cc 7 ch 09 8 ch 11 9 ch 13 10 11 12 13 3 3 choose the channel which you want to change pr number, or delete. 4 do the following action: to change the press the 3 button. then move pr number it to the pr number you want (move) to use it for the channel. finally press the 2 button. to delete the press the yellow button. channel (delete) 5 press the menu/ok button to exit the menu. ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 13
14 tv channel presetting to add in the new channel (insert in the edit menu) y ou can add in the new channel in the tv channel list as you like. y ou need to find the ?h/cc?number for the tv channel. find the ?h/cc?number correspond- ing to the channel number of the tv channel from the attached sheet ?h/cc number list?on this page. 1 display the install menu. ? menu install 2 choose edit/ manual, then press the menu/ok button. edit menu appears. 3 choose the pr number for which you will register a new tv channel. when you add a new tv channel of ntsc-m system, press the sound system button to change the sound system to m. then proceed to the next step. 4 press the green button, then press 5 / buttons to choose ?c?or ?h? 5 press the number button to enter the remaining ch/cc number. the tv starts to search the tv channel, and the picture of the tv channel appears. if the tv finds no tv channel, a noisy picture appears. when a tv channel has already been registered in pr99, using the insert function deletes that tv channel. ? about the basic operations of the menu, please see the ?ow to operate menus and menus locations?on page 4. ch/cc number when you want to use the insert function by the previous operation, find the ch/cc number corresponding to the channel number of the tv channel from this table. channel no. country us united states, philippines, etc.. ccir middle east, southeast asia, etc.. oirt eastern europe, russia, vietnam, etc.. australia australia, etc.. ch us ccir oirt australia ch 02 us- 2 e2 r1 au- 0 ch 03 us- 3 e3 au- 1 ch 04 us- 4 e4 r2 au- 2 ch 05 us- 5 e5 r6 au- 6 ch 06 us- 6 e6 r7 au- 7 ch 07 us- 7 e7 r8 au- 8 ch 08 us- 8 e8 r9 au- 9 ch 09 us- 9 e9 ch 10 us- 10 e10 r10 au- 10 ch 11 us- 11 e11 r11 au- 11 ch 12 us- 12 e12 r12 ch 13 us- 13 ch 14 us- 14, w+ 29 ch 15 us- 15, w+ 30 ch 16 us- 16, w+ 31 ch 17 us- 17, w+ 32 ch 18 us- 18, w+ 33 ch 19 us- 19, w+ 34 ch 20 us- 20, w+ 35 ch 21 us- 21, w+ 36 e21 ch 22 us- 22, w+ 37 e22 ch 23 us- 23, w+ 38 e23 ch 24 us- 24, w+ 39 e24 ch 25 us- 25, w+ 40 e25 ch 26 us- 26, w+ 41 e26 ch 27 us- 27, w+ 42 e27 ch 28 us- 28, w+ 43 e28 ch 29 us- 29, w+ 44 e29 ch 30 us- 30, w+ 45 e30 ch 31 us- 31, w+ 46 e31 ch 32 us- 32, w+ 47 e32 ch 33 us- 33, w+ 48 e33 ch 34 us- 34, w+ 49 e34 ch 35 us- 35, w+ 50 e35 ch us ccir oirt australia ch 36 us- 36, w+ 51 e36 ch 37 us- 37, w+ 52 e37 ch 38 us- 38, w+ 53 e38 ch 39 us- 39, w+ 54 e39 ch 40 us- 40, w+ 55 e40 ch 41 us- 41, w+ 56 e41 ch 42 us- 42, w+ 57 e42 ch 43 us- 43, w+ 58 e43 ch 44 us- 44, w+ 59 e44 ch 45 us- 45, w+ 60 e45 ch 46 us- 46, w+ 61 e46 ch 47 us- 47, w+ 62 e47 ch 48 us- 48, w+ 63 e48 ch 49 us- 49, w+ 64 e49 ch 50 us- 50, w+ 65 e50 ch 51 us- 51, w+ 66 e51 ch 52 us- 52, w+ 67 e52 ch 53 us- 53, w+ 68 e53 ch 54 us- 54, w+ 69 e54 ch 55 us- 55, w+ 70 e55 ch 56 us- 56, w+ 71 e56 ch 57 us- 57, w+ 72 e57 ch 58 us- 58, w+ 73 e58 ch 59 us- 59, w+ 74 e59 ch 60 us- 60, w+ 75 e60 ch 61 us- 61, w+ 76 e61 ch 62 us- 62, w+ 77 e62 ch 63 us- 63, w+ 78 e63 ch 64 us- 64, w+ 79 e64 ch 65 us- 65, w+ 80 e65 ch 66 us- 66, w+ 81 e66 ch 67 us- 67, w+ 82 e67 ch 68 us- 68, w+ 83 e68 ch 69 us- 69, w+ 84 e69 cc us ccir oirt australia cc 01 s- 1 au- 5 cc 02 s- 2 cc 03 s- 3 cc 04 s- 4 cc 05 s- 5 cc 06 s- 6 au- 5a cc 07 s- 7 cc 08 s- 8 cc 09 s- 9 cc 10 s- 10 cc 11 s- 11 cc 12 s- 12 cc 13 s- 13 cc 14 a s- 14 cc 15 b s- 15 cc 16 c s- 16 cc 17 d s- 17 cc 18 e s- 18 cc 19 f s- 19 cc 20 g s- 20 cc 21 h s- 21 cc 22 i s- 22 cc 23 j s- 23 cc 24 k s- 24 cc 25 l s- 25 cc 26 m s- 26 cc 27 n s- 27 cc 28 o s- 28 cc 29 p s- 29 cc 30 q s- 30 cc 31 r s- 31 cc 32 s s- 32 cc 33 t s- 33 cc 34 u s- 34 cc 35 v s- 35 cc 36 w s- 36 cc 37 w+ 1 s- 37 cc us ccir oirt australia cc 38 w+ 2 s- 38 cc 39 w+ 3 s- 39 cc 40 w+ 4 s- 40 cc 41 w+ 5 s- 41 cc42 w+ 6 cc 43 w+ 7 cc 44 w+ 8 cc 45 w+ 9 cc 46 w+ 10 cc 47 w+ 11 cc 48 w+ 12 cc 49 w+ 13 cc 50 w+ 14 cc 51 w+ 15 cc 52 w+ 16 cc 53 w+ 17 cc 54 w+ 18 cc 55 w+ 19 cc 56 w+ 20 cc 57 w+ 21 cc 58 w+ 22 cc 59 w+ 23 cc 60 w+ 24 cc 61 w+ 25 cc 62 w+ 26 cc 63 w+ 27 cc 64 w+ 28 cc 75 x cc 76 y r3 cc 77 z r4 au- 3 c 78 z+ 1 r5 cc 79 z+ 2 au- 4 cc 95 a- 5 cc 96 a- 4 cc 97 a- 3 cc 98 a- 2 cc 99 a- 1 channel ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 14
15 additional preparation the illustrations shown in this section are for AV-14FMG4 only, which are used for explanation purpose. your tv may not look exactly the same as illustrated. before connecting ?read the manuals provided with the devices for the proper connection. ?turn off all the devices including the tv. ?note that connecting cables are not supplied. video audio video -1 input output front of the tv rear of the tv vcr (for playing) dvd player (composite signals) headphones vcr (for recording) camcorder or tv game tr oubleshooting if a problem occurs when you are using the tv, check the following troubleshooting guide before calling for repair. no picture, no sound snowy picture stripes appear on the picture double-pictures (ghosting) occur p oor picture white and bright still image look as if it were coloured t op of the image from software products or video tape is distorted ?deactivate the blue back function if it is turned on. ?choose the appropriate sound sy stem. refer to ?ound system on page 10. ?check the aerial cable and its connection with the tv. ?interference occurs caused by other devices such as an amplifier, personal computer, or a hair drier. move such devices away from your tv. ?interference occurs caused by signal reflecting from mountains or building. try to adjust the aerials direction or use a better directional- ity antenna. ?choose the appropriate colour sy stem. refer to ?olour s ystem?on page 8. ?adjust the colour or bright setting. refer to adjusting the picture - user?on page 8. ?inevitable phenomenon due to the nature of the picture tube. this is not a malfunction. ?this is due to the condition of the video signal whereby the image w as not recorded properly. this is not a malfunction. cannot operate the r emote control cannot operate the menus cannot operate the front control buttons tv is turned off suddenly colour patches appear at the corner of the screen image takes a short period to be displayed tv may emitted crackling sound f eel a slight electric shock when touching the tv screen ?the batteries may be exhausted. r eplace with new batteries (see page 6). ?ensure that you are operating the r emote less than seven meters from the front of your tv. ?press tv/video button to return to tv mode and try operating the menus. ?deactivate the child lock function if it is turned on (see page 12). ?this may due to the auto shut off function is activated. press the power button to turn on the tv. ?this may due to the magnetized device such as a speaker near to y our tv. keep the device apart from your tv. alternately, you can also use the magnetic- shielded speaker. ?image required time to stabilize before display. this is not a malfunction. ?this is due to a sudden change in temperature and it is not a malfunction. if the crackling sound is too frequent, request your service technician for inspection. ?this is due to the static electricity of the picture tube and it will not harm the human body. this is not a malfunction. ggt0037-001a-h-p02-15 5/24/04, 3:06 pm 15
tv rf systems b/g, i, d/k, m colour systems p al, secam, ntsc 3.58 mhz, ntsc 4.43 mhz receiving channels vhf low channel (vl), vhf high channel (vh), uhf channel (u) receives cable channels in mid band, super band and hyper band. power requirements ac 110 to 240 v, 50/60 hz external input / output video-1: video input, audio input video-2: video input, audio input, output: video output, audio output headphone jack: stereo mini jack (3.5 mm diameter, sound is monaural) t eletext system flof (fastext), wst (world standard text) language displayed by teletext please see the table in the description ?ext language?on page 9. design and specifications are subject to change without notice. specifications 0604-nic-jmt ?2004 victor company of japan, limited ggt0037-001a-h-cover 5/24/04, 3:06 pm 20

▲Up To Search▲

Price & Availability of AV-14FMG4

	To Download AV-14FMG4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .