fast-acting axial leaded c518 5mm x 15mm glass fuses form no. c518 page 1 of 2 bif doc #2026 bussmann 12-17-98 sb98107 rev. a dimensional data time in seconds 1 .1 .1 1 10 100 current in amperes .01 100 10 ampere rating 100ma 125ma 250ma 375ma 500ma 750ma 1.5a 2a 2.5a 3a 3.5a 4a 5a markings: manufacturer? symbol, product symbol, voltage, ampere, testing agency mark (optional) dimensions are in millimeters (mm) 15.0 0.5mm 5.0mm (typ.) 0.6mm dia. (typ) 5.2 0.3mm time-current characteristic curves?verage melt (full size curves available) c518 axial leaded fast-acting fuses. limits for pre-arcing time/ul listed fuses. 135% 110% 200% amp ratings max min max 100ma - 7a 1 hr. 4 hr. 2 sec. agency file numbers: ul listing. file e75865, guide # jdyx. csa certification. file lr65063 class 1422-01. product symbol: c518 physical fuse size: 5 x 15mm mechanical characteristics: materials: endcaps are silver-plated brass; leads are tin-plated copper and tube is glass. optional sleeve is flexible fluoropolymer (ul flammability rating vw-1). the tube will self extinguish within one minute. 25% maximum flag burn per astm flammability test astm d2671 procedure c. lead pull: leads will withstand a seven pound pull applied axially to the lead for five seconds. lead bend: leads will be bent 90 degrees in one direction, back to original direction, then 90 degrees in the opposite direction and return to the cycle. leads will withstand two cycles. the bending is to be done with a two pound weight attached to the end of the lead. temp. range: -55? to +85? with proper derating. weight: 1000 = 1.33kg. ce logo denotes compliance with european union low voltage directive (50-1000v ac, 75-1500v dc). refer to bif document #8002 or contact bussmann application engineering at 314-527-1270 for more information.
12-17-98 sb98107 rev. a form no. c518 page 2 of 2 bif doc #2026 bussmann the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. fast-acting axial leaded c518 5mm x 15mm glass fuses rated voltage drop pre-arcing current voltage (mv) max (at 100% value rating (v ac) air rated current.) (i 2 t) (a 2 s) typ. 100ma 125ma 250ma 35a/250v ac 375ma 10ka/125v ac 500ma p.f. = 0.7 - 0.8 750ma 250v 2a 100a/250v ac 149 1.56 2a 10ka/125v ac 135 4.75 3a p.f. = 0.7 - 0.8 122 7.5 3.5a 4a 200a/250v 10ka/125v ac 5a p.f. =.7 - .8 u.l. csa electrical characteristics: packaging & ordering information: product ampere symbol rating blank - standard 100ma s - transparent 125ma sleeve for 250ma package code sealed fuses. 375ma bk/ bulk package (100 pcs) 500ma tr/ tape & reel (500 pcs) 750ma tr1/ tape & reel (1,000 pcs) 2a tr2/ tape & reel (1,500 pcs) 3a note: tape & reel packaging 3.5a per eia 296-e (10.2mm component 4a pitch and 52.4mm tape-to-tape spacing) 5a c518
|
