. . . . rf saw filter part number package application last modified 803-rf481.2m-a 3.8 x 3.8 smd cdma450(f-band) tx jan. 01, 2007 type : cdma450(f-band), rf-tx saw filter part number : 803-rf481.2m-a operating conditions / el ectrical characteristics parameters condition minimum typical maximum units center frequency (fo) - - 481.2 - mhz maximum insertion loss 479.0 ~ 483.5 mhz - 1.8 2.8 db stop band attenuation: 0.3 ~ 467.0 mhz 25 27 - db 489.0 ~ 493.5 mhz 30 49 - 493.5 ~ 1700 mhz 23 27 - 1700 ~ 2000 mhz 18 20 - source impedence (single ended)* - - 50 - ohm load impendance (single ended)* - - 50 - ohm vswr 479.0 ~ 483.5 mhz - 1.5 2.0 - input power - - - 30 dbm operating temperature - -30 - +80 oc * no matching network package outline (mm) pin layout a ground b in c ground d ground e out f ground test fixture pa g e 1 of 3 oscilent cor p oration rf saw filter | 803-rf481.2m-a
load impedance = 100 ohms source impedance = 50 ohms frequency response vswr smith chart pa g e 2 of 3 oscilent cor p oration rf saw filter | 803-rf481.2m-a
crystal oscillators | quartz crystal | tcxo | vcxo | if saw filter | rf saw filter | ceramic resonator crystal filter | ceramic filter | saw filter / saw devices | site map part no.: 803-rf481.2m-a pa g e 3 of 3 oscilent cor p oration rf saw filter | 803-rf481.2m-a
|