|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Illuminated Switches Miniature Pushbuttons Square Bushing Mount (5.0) .197 M12 P1 (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 (1.8)Typ .071 COM L 4 1 KB Series (1.8) .071 6 5 3 2 L Keyway (.127 .005 (5.08) .200 (1.7)Typ .067 (9.0) .354 (11.6) Sq .457 (14.0) Sq .551 (1.4) .055 (3.5) .138 (14.2) .559 (5.3) (24.7) .209 .972 Latchdown Position (1.0) .039 (5.0) .197 KB15SKW01-05-GG Single & Double Pole Round Bushing Mount Single pole models do not have terminals 4, 5, & 6. (5.0) .197 M12 P1 (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 (1.8)Typ .071 COM L 4 1 (1.8) .071 6 5 3 2 L Keyway (.127 .005 (5.08) .200 (1.7)Typ .067 (9.0) .354 (11.6) Dia .457 (14.0) Dia .551 (1.4) .055 (3.5) .138 (14.2) .559 (5.3) (24.7) .209 .972 Latchdown Position (1.0) .039 (5.0) .197 KB25CKW01-05-GG Single & Double Pole (5.0) .197 M12 P1 Single pole models do not have terminals 4, 5, & 6. (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (1.8) .071 (4.9) .193 (1.8)Typ .071 COM L 4 1 6 5 3 2 L Rectangular Bushing Mount Keyway (.127 .005 (11.6) .457 (14.0) .551 (5.08) .200 (1.7)Typ .067 (9.0) .354 (16.1) .634 (18.5) .728 (1.4) .055 (3.5) .138 (14.2) .559 (24.7) (5.3) .972 .209 Latchdown Position (1.0) .039 (5.0) .197 KB15RKW01-05-GG Single & Double Pole 4 5 6 7 8 Single pole models do not have terminals 4, 5, & 6. How to order: 1 2 3 KB 1 1 2 2 POLES: SPDT DPDT CIRCUITS: ON-(ON) ON-ON (Alternate Action with Latchdown) SHAPES: Square Round Rectangular Square Round Rectangular HOUSING: Black only 6 Blank B BARRIER TYPE: No Barrier With Barrier 5 6 3 7 LAMPS: Type1: Incandescent Lamp used with Solid Cap 5-volt 05 12 12-volt 8 CAPS TYPES & COLORS: Solid Cap: Lens/Filter Colors (for type 1 lamp) FB Green/White White/White BB Green/Green55 FF Red/White55 CB GB Blue/White CC Red/Red GG Blue/Blue EB Yellow/White Bushing Mounting S C R K M N 4 Type2: Incandescent or Neon used w / Insert Cap 110-volt Neon 01 5-volt Incandescent 05 12 12-volt Incandescent Type 3: Bright LED used with LED Cap No Resistor 5-volt Red Amber Green 5C 5D 5F 5C05 5D05 5F05 Snap-in Mounting Insert Cap: Lens/Filter Colors (for type 2 lamp) Clear/White JB Clear/Red JC Clear/Yellow JE *JF Clear/Green *JG Clear/Blue * JF & JG not suitable with neon. LED Cap: Lens/Diffuser Colors (for type 3 lamp) Clear/White JB Clear/Red JC Clear/Amber JD JF Clear/Green AB Square Spot Illuminated Black Cap/White Window LED Cap: Lens/Diffuser Colors (for type 4 lamp) JB Clear/White 12-volt 24-volt 5C12 5D12 5F12 5C24 5D24 5F24 K 5 CONTACTS & TERMINALS: W01 Silver Contacts and Solder Lug Terminals 1A @ 125/250V AC G01 Gold Contacts and Solder Lug Terminals 0.4VA @ 28V AC/DC Type 4: Super Bright LED used with LED Cap White 6B Green 6F Blue 6G sales@greatecs.com www.greatecs.com Illuminated Switches 1 Illuminated Switches Miniature Pushbuttons TYPICAL SWITCH DIMENSIONS KB Series Square Snap-in Mount Single & Double Pole (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 COM (1.8) .071 6 5 L 4 1 3 2 L Keyway (.127 .005 (2.3) .090 (11.6) Sq .457 (14.0) Sq .551 (1.4) .055 (3.5) .138 (1.0) .039 (24.7) (5.3) .972 .209 Latchdown Position (5.0) .197 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (9.0) .354 KB16KKW01-05-CB Single pole models do not have terminals 4, 5, & 6. Round Snap-in Mount Single & Double Pole Illuminated Switches (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 COM (1.8) .071 6 5 L 4 1 3 2 L Keyway (.127 .005 (2.3) .090 (11.6) Dia .457 (14.0) Dia .551 (1.4) .055 (3.5) .138 (1.0) .039 (24.7) (5.3) .972 .209 Latchdown Position (5.0) .197 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (9.0) .354 KB26MKW01-05-CB Single pole models do not have terminals 4, 5, & 6. Rectangular Snap-in Mount Single & Double Pole (1.0) x (2.0)Typ .039 x .079 (11.6) .457 (14.0) .551 (0.2) Typ .008 (4.9) .193 COM (1.8) .071 6 5 L 4 1 3 2 L Keyway (.127) .005 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (16.1) .634 (18.5) .728 (1.4) .055 (3.5) .138 (1.0) .039 (24.7) (5.3) .972 .209 Latchdown Position (5.0) .197 (9.0) .354 KB16NKW01-05-CB Single pole models do not have terminals 4, 5, & 6. sales@greatecs.com www.greatecs.com 2 Illuminated Switches Miniature Pushbuttons TYPICAL SWITCH DIMENSIONS KB Series Square Barrier Bushing Mount Single & Double Pole (5.0) .197 M12 P1 (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 COM L 4 1 (1.8) .071 6 5 3 2 L Keyway (.127 .005 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (11.6) Sq .457 (14.0) Sq .551 (5.3) .209 (8.8) .346 (14.2) .559 (24.7) .972 (1.0) .039 (5.0) .197 (9.0) .354 KB15SKW01B-6G-JB Single pole models do not have terminals 4, 5, & 6. Square Barrier Snap-in Mount Single & Double Pole (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 COM L 4 1 (1.8) .071 6 5 3 2 L Keyway (.127 .005 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (11.6) Sq .457 (14.0) Sq .551 (5.3) .209 (8.8) .346 (1.0) .039 (24.7) .972 (5.0) .197 (9.0) .354 KB15KKW01B-5C-JC Single pole models do not have terminals 4, 5, & 6. Rectangular Barrier Bushing Mount Single & Double Pole (5.0) .197 M12 P1 (1.0) x (2.0)Typ .039 x .079 (0.2) Typ .008 (4.9) .193 COM L 4 1 (1.8) .071 6 5 3 2 L Keyway (.127 .005 (11.6) .457 (14.0) .551 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (16.1) .634 (18.5) .728 (5.3) .209 (8.8) .346 (14.2) .559 (24.7) .972 (1.0) .039 (5.0) .197 (9.0) .354 KB15RKW01B-5F-JF Single pole models do not have terminals 4, 5, & 6. Rectangular Barrier Snap-in Mount Single & Double Pole (1.0) x (2.0)Typ .039 x .079 (1.8) .071 (4.9) .193 COM L 4 1 6 5 3 2 L Keyway (.127) .005 (11.6) .457 (14.0) .551 (0.2) Typ .008 (1.8)Typ .071 (5.08) .200 (1.7)Typ .067 (16.1) .634 (18.5) .728 (5.3) .209 (8.8) .346 (1.0) .039 (24.7) .972 (5.0) .197 (9.0) .354 KB15NKW01B-5D-JD Single pole models do not have terminals 4, 5, & 6. sales@greatecs.com www.greatecs.com Illuminated Switches 3 Illuminated Switches Miniature Pushbuttons KB Series General Specifications Electrical Capacity (Resistive Load) Power Level (silver): Logic Level (gold): 1A @ 125/250V AC or 1A @ 30V DC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum 1,000 megohms minimum @ 500V DC For Silver: 1,000V AC minimum between contacts for 1 minute minimum & 1,500V AC minimum between contacts & case for 1 minute minimum For Gold: 750V AC minimum between contacts for 1 minute minimum & 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 50,000 operations minimum for silver; 100,000 operations minimum for gold Single pole 0.98 ~ 2.45N for maintained & 0.98 ~ 1.96N for momentary; Double pole 1.47 ~ 3.43N for maintained & 1.47 ~ 2.94N for momentary Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: Nonshorting (break-before-make) Pretravel .087" (2.2mm); Overtravel .031" (0.8mm); Total Travel .118" (3.0mm) Polyamide (UL94V-0) Silver for power circuit; copper with gold plating for logic level circuit Silver for power circuit; copper with gold plating for logic level circuit Polyamide (UL94V-0) Polyester Phosphor bronze with silver flash plating for power circuit; Phosphor bronze with gold flash plating for logic level circuit Brass with silver flash plating for power circuit; Brass with gold flash plating for logic level circuit Phosphor bronze with nickel flash plating -25C through +50C (-13F through +122F) 90 ~ 95% humidity for 96 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s ) acceleration (tested in 6 right angled directions, with 3 shocks in each direction) 0.78Nm (6.9 lb in) maximum 4.51N (1.0 lbf) maximum downward force on cap Manual Soldering: See Profile A in Supplement section 2 Housing: Movable Contactor: Stationary Contacts: Housing Base: Terminal Base: Common Terminals: End Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Mounting Torque: Cap Installation Force: Soldering Time & Temperature: Standards & Certifications Flammability Standards: UL & C-UL Recognized: R CSA Certified: UL94V-0 housing & housing base Single & double pole models recognized at 1A @ 125/250V AC, 1A @ 30V DC, & 0.4A @ 28V DC; UL File No. WOYR2.E44145: add "/U" to end of part number to order UL mark on switch. UL File No. WOYR8.E44145: add "/C-UL" to end of part number to order C-UL mark on switch. Single & double pole models recognized at 1A @ 125/250V AC, 1A @ 30V DC, & 0.4VA @ 28V maximum; CSA File No. 023535-0-000; add "/C" to end of part number to order CSA mark on switch. sales@greatecs.com www.greatecs.com 4 Illuminated Switches Materials & Finishes Illuminated Switches Miniature Pushbuttons KB Series POLE & CIRCUIT Plunger Position ( ) = Momentary Normal Pole SP Model KB15 * KB16 KB25 * KB26 ON ON ON ON (ON) ON (ON) ON 2-3 2-1 Down Connected Terminals Normal Down Throw & Switch/Lamp Schematics Notes: Switch is marked with "+" and "-". Lamp circuit is isolated and requires external power source. 2 (COM) CUTAWAY SPDT 3 2 (COM) 1 6 1 5 L (+) (-) L DP 1-3 4-6 2-1 5-4 DPDT 3 4 L (+) (-) L * When in latchdown position for the alternate circuit, cap position is .055" (1.4mm) above the built-in bezel. MOUNTING TYPES & SHAPES Bushing Mounting S .551" (14.0mm) Square C .551" (14.0mm) Round R .551" x .728" (14.0mm x 18.5mm) Rectangular Illuminated Switches No barrier With barrier No barrier With barrier Bezel or barrier is an integral part of the switch body. One mounting nut AT057 supplied with each switch. Snap-in Mounting K .551" (14.0mm) Square M .551" (14.0mm) Round N .551" x .728" (14.0mm x 18.5mm) Rectangular No barrier With barrier Bezel or barrier is an integral part of the switch body. Panel Cutouts Bushing Mounting (1.8) .071 No barrier With barrier Snap-in Mounting (1.2)R .047 (4.9) .193 (12.3) Dia .484 Without Keyway (12.3) Dia .484 Panel Thickness: .020" ~ .315" (0.5 ~ 8.0mm) With Keyway Panel Thickness: .039" ~ .138" (1.0 ~ 3.5mm) (6.8) .268 (12.3) Dia .484 Panel thicknesses, when using optional accessories, are shown with the accessories at the end of this KB section. sales@greatecs.com www.greatecs.com 5 Illuminated Switches Miniature Pushbuttons KB Series CONTACT MATERIALS, RATINGS $ TERMINALS W Silver Contacts Power Level 1A @ 125V AC & 250V AC Logic Level 0.4VA maximum @ 28V AC/DC 01 Solder Lug G Gold Contacts (5.0) .197 (2.0) (1.8) .079 .071 (1.0) .039 Thk = (0.2) Com = (0.1) .008 .005 Complete explanation of operating range in Supplement section. A partitioned plastic guard is supplied with each switch to provide insulation between terminals. Installation steps: 1. Identify wire-to-terminal connections. 2. Thread wires through the guard. 3. Solder the connections. 4. Push the guard fully onto the switch body. (12.4) Dia .488 (14.0) Dia .551 (17.0 .669 LAMP COLORS & SPECIFICATINS The electrical specifications shown are determined at a basic temperature of 25C LED circuit is isolated and requires external power source. Polarity marks are on the bottom of the switch. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. Ambient Temperature Range for lamps below: -25C ~ +50C. Incandescent & Neon Lamps AT611 Incandescent AT615 Neon 05 Voltage Current V I Hours 5V AC 115mA 12 12V AC 60mA 01 110V AC 1.5mA 10,000 Recommended Resistors for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC T-1 Bi-pin Endurance 7,000 average Bright LED with Resistor AT634 LEDs are colored in OFF state. Color Codes: Red Amber Green Resistor Codes 5C 5D 5F IFM IF VF V RM I F 05 -- 25mA 5V 4V -- 12 -- 20mA 12V 8V -- 24 -- 10mA 24V 16V -- Forward Peak Current Continuous Forward Current Forward Voltage Reverse Peak Voltage T-1 4 Bi-pin 1 Current Reduction Rate Above 25C AT634 12-volt (+) 4-element with 2 Resistors AT634 5-volt 2-element with 1 Resistor (+) (-) (-) AT634 (+) 24-volt 4-element with 2 Resistors (-) sales@greatecs.com www.greatecs.com Illuminated Switches 6 Illuminated Switches Miniature Pushbuttons LAMP COLORS & SPECIFICATIONS KB Series Bright LED without Resistor AT635 LEDs are colored in OFF state. Color Codes Red Amber Green No Code Red 30mA 20mA 1.9V 5V No Resistor Green 30mA 20mA 2.1V 5V 5C 5D 5F IFM IF VF V RM I F Amber 30mA 20mA 2.0V 5V 0.42mA/C -25 ~ +50C Forward Peak Current Continuous Forward Current Forward Voltage (+) (-) Reverse Peak Voltage Current Reduction Rate Above 25C T-1 1 2 Bi-pin Ambient Temperature Range Super Bright Single Element LED AT625G Blue AT631B White Attention Electrostatic Sensitive Devices 6B Color IFM IF VF V RM I F White 30mA 20mA 3.6V 5V 0.50mA/C 6F Green 30mA 20mA 3.5V 5V 0.50mA/C -25 ~ +50C 6G Blue 30mA 20mA Illuminated Switches Forward Peak Current AT632F Green Continuous Forward Current Forward Voltage (+) (-) 3.6V 5V 0.50mA/C Reverse Peak Voltage Current Reduction Rate Above 25C T-1 Bi-pin Ambient Temperature Range CAP TYPES & COLOR COMBINATIONS Color Codes: A Black B White C Red E Yellow F Green G Blue J Clear Solid Cap for Incandescent Lamp Lens/Filter Colors Available: BB CB CC EB FB FF GB GG AT485 Square (11.6) Sq .457 (4.5) .177 (6.2) .244 AT486 Round (11.6) Dia .457 (4.5) .177 (6.2) .244 (11.6) .457 AT4021 Rectangular (16.1) .634 (4.5) .177 (6.3) .248 Translucent Colored Lens Translucent Colored Filter Material: Polycarbonate Finish: Glossy Lamp AT611 Insert Cap for Incandescent or Neon Lamp Lens/Filter Colors Available: JB JC JE JF JG AT487 Square (11.6) Sq .457 (4.5) .177 (6.2) .244 AT488 Round (11.6) Dia .457 (4.5) .177 (6.2) .244 (11.6) .457 AT4022 Rectangular (16.1) .634 (4.5) .177 (6.3) .248 Transparent Clear Lens Translucent Colored Filter JF and JG not suitable with neon lamp. Material: Polycarbonate Finish: Glossy Lamp AT611 Lamp AT615 sales@greatecs.com www.greatecs.com 7 Illuminated Switches Miniature Pushbuttons OPTIONAL ACCESSORIES KB Series Color Codes: A Black B White C Red D Amber E Yellow F Green G Blue J Clear Spot Illuminated Cap for Bright LED without Resistor or with Resistor Cap/Window Colors Available: AB Opaque Black Cap with Translucent White Window for Spot Illumination (3.0) .118 AT4051 Square (1.8) .071 (5.0) .197 (11.6) Sq .457 (4.6) .181 (6.2) .244 Material: Polycarbonate Finish: Matte Bright LED Bright LED AT635 AT634 Cap for Bright LED without Resistor or LED with Resistor Lens/Diffuser Colors Available: (AT4133, 4132, 4134 white diffusers; AT4158, 4160, 4159 colored diffusers) AT4132 Round AT4134 Rectangular Square Transparent Clear Lens JC JD JF AT4158 AT4160 AT4159 (11.6) Sq .457 (4.5) .177 (6.2) .244 (11.6) Dia .457 (4.5) .177 (6.2) .244 (11.6) .457 (16.1) .634 (4.5) .177 (6.3) .248 Translucent Diffuser Material: Polycarbonate Finish: Glossy Bright LED AT635 Bright LED AT634 Cap for Super Bright LED Lens/Diffuser Colors Available: AT4133 Square AT4132 Round AT4134 Rectangular JB Translucent Clear Lens (11.6) Sq .457 (4.5) .177 (6.2) .244 (11.6) Dia .457 (4.5) .177 (6.2) .244 (11.6) .457 (16.1) .634 (4.5) .177 (6.3) .248 Translucent White Diffuser Material: Polycarbonate Finish: Glossy Super Bright LEDs AT625 AT631 AT632 sales@greatecs.com www.greatecs.com Illuminated Switches JB AT4133 8 Illuminated Switches Miniature Pushbuttons OPTIONAL ACCESSORIES KB Series PCB Adaptors AT701 Single Pole Straight PC Terminals AT702 Double Pole Straight PC Terminals AT077 Single Pole Right Angle PC Terminals Switch (2.8) Depth .110 (0.3) .012 Keyway (0.2) Typ .008 (2.54) Typ .100 6 NC COM NO 5 4 3 21 Switch (2.8) Depth .110 (0.3) .012 Keyway (0.2) Typ .008 (2.54) Typ .100 6 NC COM NO 5 4 3 21 Switch (2.8) Depth .110 (12.0) Dia .472 (9.8) .386 (0.4) .016 (6.0) .236 (11.4) .449 3 2 1 + - (12.0) Dia .472 (0.6) Typ .024 (9.8) .386 (3.1) .122 + (12.0) Dia .472 (0.2) Typ .008 (2.54) Typ .100 (0.6) Typ .024 (9.8) .386 (3.1) .122 + (10.16) .400 (10.16) .400 (0.2) Typ .008 (2.54) Typ .100 (0.4) Typ .016 (7.62) .300 (1.4)Typ .055 (0.8) Typ .031 (13.0) .512 (1.2)Typ .047 (2.54) Typ .100 3 (2.54) Typ (2.54) Typ .100 .100 NC (0.8) Dia Typ .031 3 (2.54) Typ (2.54) Typ .100 .100 NC 6 5 4 1 2 3 2 COM 1 NO 2 COM 1 NO (7.62) .300 (10.16) .400 (1.8) Dia Typ .071 (10.16) .400 (10.16) .400 (0.8) Dia Typ .031 Note: Order adaptors separately Dust Covers Panel Thickness Range: .020 ~ .268" (0.5 ~ 6.8mm) for Bushing Mounting; .020 ~ .079" (0.5 ~ 2.0mm) for Snap-in Mounting Dust Covers reduce the depth of switch behind panel by .047" (1.2mm). AT495 For Square & Round (not for Barrier type) AT4025 For Rectangular (not for Barrier type) Assembled Cap Height (7.0) .276 (1.2)R .047 Assembled Cap Height (1.2)R .047 (13.0) Sq .512 (12.3) Dia .484 (5.1) .201 (13.0) Sq .512 (12.3) Dia .484 (21.0) .827 (6.5) .256 (11.8) .465 (1.6) .063 (21.0) Sq .827 (6.5) .256 (11.8) .465 (7.0) .276 (25.4) 1.004 Material: Lid: PVC PVC loses pliability below 0C (32F). Base: Polyamide sales@greatecs.com www.greatecs.com Illuminated Switches (2.54) Typ .100 9 Illuminated Switches Miniature Pushbuttons OPTIONAL ACCESSORIES KB Series Protective Guards AT494 For Square & Round (not for Barrier type) AT4024 For Rectangular (not for Barrier type) Panel Thickness Range: .020" ~ .268" (0.5 ~ 6.8mm) for Bushing Mounting (9.0) .354 Assembled Cap Height (7.0) .276 (1.2)R .047 Assembled Cap Height (9.0) .354 (5.1) .201 (7.0) .276 (1.2)R .047 (12.3) Dia .484 (12.3) Dia .484 (19.0) .748 .020" ~ .091" (0.5 ~ 2.3mm) for Snap-in Mounting (6.5) .256 (11.5) .453 (1.6) .063 (19.0) Sq .748 (6.5) .256 (11.5) .453 (23.5) .925 Protective Guards reduce the depth of switch behind panel by .047" (1.2mm). ASSEMBLY INSTRUCTIONS Cap Removal & Installation For alternate action models cap must be in UP position for cap removal. Indentations on opposite sides of the cap provide an easy way to lift the cap out of the holder, or cap extractor AT109. LED Polarity & Orientation in Lamp Socket Super Bright LEDs AT625, AT631, & AT632 are electrostatic sensitive. Cap Replacement Note that the cap has a pair of round tabs and a pair of long tabs which should be used for correctly replacing the cap in its holder. Using the long tabs as guides, slide the cap with the long tabs moving into the slots on opposite sides of the cap holder. Then, the round tabs will snap into notches on the other two sides of the holder. Cap Attention Electrostatic Sensitive Devices LED AT635 LED AT634 Flat LEDs AT625 AT631 AT632 Flat (-) (+) (-) (+) Flat (+) (-) Indentation Long Tab (+) Marking Notch Round Tab Slot Top View of Switch Positive Lamp Socket Negative Lamp Socket AT108 Socket Wrench for Bushing Mounting Overtightening the mounting nut may damage the switch housing. AT109 Cap Extractor AT111 Lamping Tool sales@greatecs.com www.greatecs.com Illuminated Switches Material: Cover: Polycarbonate Base: Polyamide 10 Illuminated Switches Miniature Pushbuttons KB Series LEGENDS General information and basic specifications are presented here for customers who want to do their own legends. Suggested Printable Area for KB Lens Recommended Methods: Laser Etch on clear lens, Screen Print, or Pad Print on Lens. Epoxy based ink is recommended. (10.08) (11.6) .397 .457 Suggested Printable Area for Film Insert Lens Recommended Print Method: Screen Print with Epoxy based ink Film Insert: Clear Polyester, 4 mil max. thickness ON Film Insert (8.48) (10.0) .334 .394 Filter or Diffuser (8.48) Sq .334 (10.0) Sq .394 (0.76) Typ .030 (8.48) Dia .334 (10.0) Dia .394 (0.76) Typ .030 (0.76) Typ .030 (12.98) .511 (14.5) .571 Cap Base (0.76) Typ .030 Shaded areas are printable areas. Additional Methods lm inserts. Maximum depth for engraving is .012" (0.3mm) on the cap lens. sales@greatecs.com www.greatecs.com Illuminated Switches ST AR T (10.08) Sq .397 (11.6) Sq .457 (0.76) Typ .030 (10.08) Dia .397 (11.6) Dia .457 (0.76) Typ .030 (0.76)T yp .030 (14.58) .574 (16.1) .634 (0.76) Typ .030 Shaded areas are printable areas. 11 |
Price & Availability of KB16NKW01-05-CB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |