 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SMT GATE DRIVE TRANSFORMERS 1500VDC Basic and Operational Insulation 1500VDC isolation between Gate and Drive Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25C -- Operating Temperature -40C to 130C 5 Part 3,4 Number Turns Ratio Pri-Sec Insulation (VDC) MAX 1 V*sec Primary Inductance (H MIN) Leakage 2 Inductance (H MAX) DCR Primary ( MAX) 0.60 2.00 1.60 0.80 0.75 0.62 0.88 0.91 0.91 0.91 DCR Secondary ( MAX) 0.60 2.00 1.60 0.80 0.75 0.88 0.62 0.91 0.46 0.380 Package Size (L x W x H) (mm MAX) 8.6 x 6.7 x 2.5 8.0 x 6.6 x 5.3 9.0 x 8.6 x 7.6 7.2 x 6.1 x 3.8 8.6 x 6.7 x 3.6 11.8 x 8.8 x 4.0 11.8 x 8.8 x 4.0 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 OPERATIONAL INSULATION PE-68386NL 1:1 1500 9.7 785 0.46 P0926NL 1:1:1 1500 23.8 300 0.50 P0544NL 1:1:1 1500 45.1 3300 0.70 P2033 1:1 1500 9.3 500 17.00 PA0264NL 1:1:1 1500 12.7 1140 0.65 BASIC INSULATION (1.4 MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) PA0173NL 1:1:1 1500 Vrms 17.2 980 0.75 PA0185NL 1:1 1500 Vrms 17.2 980 0.75 PA0184NL 1:1 1500 Vrms 27.2 1200 0.50 PA0297NL 2:1:1 1500 Vrms 27.2 1200 0.60 PA0510NL 2.5:1:1 1500 Vrms 27.2 1200 0.68 NOTES: 1.The maximum volt-sec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications a maximum volt-sec of two times this rating is acceptable (ie: 2* (volt*sec rating) Volt*sec = (voltage applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz = V * sec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3.Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape and reel specification EIA481. 4.The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. 5.The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Mechanical .340 MAX 8,64 Schematic .050 1,27 1 6 6 PE-68386 Date Code Country of Origin 4X .100 2,54 .265 MAX 6,73 1 .060 1,52 3 3 .200 5,08 .100 2,54 4 Weight . . . . . . . . . . . . . .0.28 grams Tape & Reel . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . .60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 .098 MAX 2,49 .005/0,13 4 SURFACES .225 5,71 SUGGESTED PAD LAYOUT 4 .340 MAX 8,64 1 2 3 P0264 Date Code Country of Origin 4X .100 2,54 .140 MAX 3,56 .005/0,13 6 SURFACES 2 6 5 4 .265 MAX 6,73 .200 5,08 .100 2,54 1 6 .070 1,78 .220 5,59 .320 8,13 5 3 4 Weight . . . . . . . . . . . . . .0.23 grams Tape & Reel . . . . . . . . . . . .800/reel Tube . . . . . . . . . . . . . . . . . .75/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 SUGGESTED PAD LAYOUT USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 113 SPM2007 (6/08) SMT GATE DRIVE TRANSFORMERS 1500VDC Basic and Operational Insulation Mechanicals 6X .050 1,27 .146 3,71 P0926 Date Code Country of Origin Schematics 1 6 .023 0,58 6X .050 1,27 2 1 6 5 3 4 6X .024 0,61 2 SUGGESTED 5 PAD LAYOUT 3 .330 8,38 .260 MAX 6,60 4 .073 1,85 .315 MAX 8,00 .210 MAX 5,33 .060 1,52 .355 MAX 9,02 8 7 6 5 .300 7,62 .005/0,13 6 SURFACES Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . .1000/reel Tube . . . . . . . . . . . . . . . . . .80/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 3X .100 2,54 8 .050 1,27 1 .100 2,54 5 .225 5,71 4 P0544 / PA0297 / PA0510 3 1 8 PA0184 6 4 5 1 8 4 5 .340 MAX 8,64 Part Number Date Code Country of Origin .060 1,52 1 2 3 4 SUGGESTED PAD LAYOUT .300 MAX 7,62 .005/0,13 6 SURFACES Weight . . . . . . . . . . . . . .0.60 grams Tape & Reel . . . . . . . . . . . .400/reel Tube . . . . . . . . . . . . . . . . . .50/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 .280 7,11 1 .235 5,97 P2033 Date Code Country of Origin .310 7,87 8 .460 11,68 .430 10,92 .330 8,38 .250 6,35 1 .025 0,64 3 6 .070 1,78 (.150( 3,81 4 .035 0,89 .180 4,57 5 .340 8,64 Date Code Country of Origin PA0173 PA0185 (.050( 1,27 .010 0,25 .004/0,10 SUGGESTED PAD LAYOUT .140 3,57 8X .035 0,89 .330 8,38 .100 2,54 4 .100 2,54 .250 6,35 SUGGESTED PAD LAYOUT .160 4,06 MAX (.050( 1,27 .005/0,13 6 SURFACES ( .150 3,81 ( 8 SURFACES Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 Weight . . . . . . . . . . . . . .0.29 grams Tape & Reel . . . . . . . . . . .1200/reel Tube . . . . . . . . . . . . . . . . . .80/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 1 4 8 1 PA0173 2 5 3 4 Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . . .900/reel Tube . . . . . . . . . . . . . . . . . .60/tube 7 6 1 3 PA0185 6 4 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 54643211 / 2 * China 86 755 33966678 * Taiwan 886 3 4641811 www.pulseeng.com 114 SPM2007 (6/08) |
Price & Availability of P0926NL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |